Viewing Configuration, Selecting Port, And Setting Duplex - Allied Telesis AT-2450 Installation Manual

AT-2450 PCI Ethernet Adapter Card
Most AT-2450 settings are handled automatically by the PCI
BIOS and cannot be modified with CardAssistant. The
Configuration dialog box allows you to select media port on dual-
port model cards (default is Auto Select) and change to full
duplex (requires a full-duplex hub) (default is Half Duplex).
Press F10 when complete to accept changes.
Installing and Running CardAssistant in 32-bit Windows Mode. If you
are using Windows 95 or Windows NT 3.5x, use the 32-bit
Windows version of CardAssistant.
1. If CardAssistant is installed on your hard disk, skip to step 5.
2. Insert the installation diskette into the appropriate floppy
drive.
3. Type:
<drive> :ca
where
<drive>
CardAssistant program.
In Windows NT, select Yes when asked if you wish to install
the CardAssistant driver.
4. Install CardAssistant onto your hard disk by selecting the
Install command from the File menu.
5. Type:
path\ ca
where
path\
6. The main menu comes up and you are ready to select one of
the menu items.

Viewing Configuration, Selecting Port, and Setting Duplex

Figure 1 shows an example configuration display. You can use
either the keyboard or mouse to make selections and save or
cancel your configuration changes.
18
is the disk drive containing the
NOTE
is the optional drive and directory.