Removing An Outdated Driver From The Windows 95 Network Control Panel - Allied Telesis AT-2450 Installation Manual

AT-2450 PCI Ethernet Adapter Card
9. Reboot the computer into Windows 95 as prompted.
Windows 95 will complete the driver installation process.
Removing an Outdated Driver from the Windows 95 Network
Control Panel
If you did not run the CLEAN95 utility before plugging in the
AT-2450 adapter card, Windows will have installed an incorrect
driver for the card. You should remove this driver as follows:
1. From the "My Computer" icon (the icon in the upper left-
hand corner of the Windows 95 screen), choose "Control
Panel". Then choose "Network".
2. From the "Configuratrion" tab of the "Network" dialog
box, select the adapter to remove: The name will be similar
to "AMD PC Net Ethernet Family". Then choose
"Remove".
3. Do not shutdown or restart Windows 95 at this time. To
install the AT-2450 driver, complete the steps listed in
"Installing Network Software and Drivers" above.
8