Table of Contents
Advertisement
7. Troubleshooting
After Sales level - #TEST INPUTS menu
Parameter
Status OK
(1)
0 / 1
PHONE REM.
FAILURE
ON / NO
(1)
ON
R.CTRL B
NO
(1)
ON
R.CTRL C
NO
(1) The parameter is only displayed if the parameter IN 0-10V is set to OFF
After Sales level - #INFORMATION menu
Parameter
Adjustment range Description
S/N SCU
CTRL
ID MC IOBL
IOBL.VERSION
(2)
MC.VERSION
CALIBRA.CLOCK
(1) The menu is displayed only if the INSTALLATION parameter is set to EXTENDED
(2) The parameter is only displayed for the options, circuits or sensors actually connected
After Sales level - #CONFIGURATION menu
Parameter Adjustment range Description
MONO/ ALL.CIRC. To chose if the exemption made for one remote control applies to a single circuit (MONO) or
MODE:
IOBL
OFF/ON
61
Description
Status of the telephone inlet
Presence of an error
Presence of a remote control B
No remote control B
Presence of a remote control C
No remote control C
(1)
Serial no. of the iSense Pro DIN control panel
Control version
Identifying number of the IOBL boiler module
IOBL version of the SCU PCB
Version of the boiler radio module programme
Clock calibration
if it must be transmitted to a group of circuits (ALL CIRC)
Activation of the IOBL function
iSense Pro DIN - AD280
12/04/2011 - 300025649-001-B
Advertisement
Table of Contents
