Figure E-4 shows the DPM mode welcome window. The three options at the bottom (Getting
Started, Guides, and Learn More have mouse-over functions that either briefly describe
their meaning or provide more functions.
Figure E-4 DPM mode welcome window
The HMC can monitor and control up to 32 z Systems CPCs. The monitored and controlled
CPCs need to be defined to the HMC by using the Object Definition task, and adding the CPC
object.
The welcome window shown in Figure E-4 only appears when at least one HMC-defined CPC
is active in DPM mode. Otherwise, the traditional HMC window is presented when you log on
to the HMC.
506
IBM z13s Technical Guide