7. Install the dry ink /toner cartridge by aligning it straight out from the press and gently
sliding in until it stops.
8. Close the dry ink / toner cover.
If the cover does not close completely, make sure the cartridge is in the lock position
and is installed into the appropriate dry ink / toner location.
After you replace a dry ink / toner cartridge, the system automatically resets the High
Frequency Service Item (HFSI) usage counter for this CRU to zero (0). Check the
consumables Supplies screen to verify the reset and new status.
Replacing the Dry Ink / Toner Waste
The dry ink / toner waste bottle collects dry ink / toner that accumulates during the
When the waste bottle is full, a message displays on the press touch screen informing
you to exchange the full bottle with an empty one.
1. Ensure that the press is stopped (not running any jobs).
2. Open the center front door and locate the waste bottle.
Quick Start Guide