Power Saver button
Cancel Entry button
Clear All button
Press Status Lights
Power Saver Mode
The Power Saver feature allows the press to enter a reduced power consumption mode
when all print jobs have completed and there are no jobs currently processing. There
are two power saving modes: Low Power and Sleep.
• Low Power: After remaining inactive for a preset time period, the press enters the
Low Power mode.
• Sleep: After entering Low Power mode and remaining inactive for another preset
time period, the press enters the Sleep mode.
By default, the press automatically enters the Low Power mode after 1 minute of
inactivity. After 1 minute of inactivity, the press then enters Sleep mode. These time
intervals for both modes can be changed by the system administrator.
Refer to the following example:
• Low Power Mode is set to 1 minute.
• Sleep Mode is set to 10 minutes.
• Sleep Mode activates after 10 minutes of total inactivity and not 10 minutes after
the Low Power Mode begins.
Use this button if the press has been inactive and the touch
screen is dark (system is in Energy Saver mode). This button
manually exits the system from Energy Saver mode; it does
not place the press in Energy Save mode.
Use to enter alphanumeric characters. The 'C' Cancel Entry
cancels the previous entry made on the numeric keypad.
Use this button to cancel the previous entry made on the
Use this button to return all selections to the same state
as when the press was powered on. Press once to clear a
current entry. Press twice to return to default settings.
Press to stop and pause the print job in progress.
Press to start and print a selected report. Also used by the
Customer Service Engineer during diagnostic routine pro-
The three indicator lights that identify: data transmission
in progress, the press is experiencing an error, and main
power is on.
Quick Start Guide