08
Using other functions
Switching the speaker system
If you selected Speaker B in Surround back
speaker setting on page 93, three speaker
system settings are possible using SPEAKERS.
If you selected Normal, Front Bi-Amp or
ZONE 2, the button will simply switch your
main speaker system on or off. The options
below are for the Speaker B setting only.
•
Use SPEAKERS on the front panel to
select a speaker system setting.
As mentioned above, if you have selected
Normal, the button will simply switch your
main speaker system (A) on or off.
Press repeatedly to choose a speaker system
option:
• SPA – Sound is output from speaker
system A.
• SPB – Sound is output from the two
speakers connected to speaker system B.
Multichannel sources will not be heard.
• SPAB – Sound is output from speaker
system A (up to 5 channels, depending on
the source), the two speakers in speaker
system B, and the subwoofer. The sound
from speaker system B will be the same as
the sound from speaker system A
(multichannel sources will be downmixed
to 2 channels).
• SP (off) – No sound is output from the
speakers.
Note
1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 93. However, if SPB is
selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except Speaker B connections) are switched off when headphones are connected.
2 If the receiver is in standby, the display is dimmed, and ZONE 2 DVD for example shows in the display.
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also
changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.
68
En
Using the MULTI-ZONE controls
The following steps use the front panel controls
to adjust the sub zone volume and select
sources. See MULTI-ZONE remote controls on
page 69.
1
Press MULTI-ZONE ON/OFF on the front
panel.
1
Each press selects a MULTI-ZONE option:
• ZONE 2 ON – Switches the MULTI-ZONE
feature on
• MULTI ZONE OFF – Switches the MULTI-
ZONE feature off
The MULTI-ZONE indicator lights when the
MULTI-ZONE control has been switched ON.
2
Press MULTI-ZONE CONTROL on the
front panel.
• When the receiver is on,
any operations for the sub zone are done
while ZONE 2 shows in the display. If this is
not showing, the front panel controls affect
the main zone only.
3
Use the INPUT SELECTOR dial to select
the source for the sub zone.
For example, ZONE 2 CD-R sends the source
connected to the CD-R inputs to the sub room
(ZONE 2).
• If you select TUNER, you can use the tuner
controls to select a preset station (see
Saving station presets on page 51 if you're
unsure how to do this).
• VSX-919AH model only: iPod/USB function
cannot be selected for the MULTI-ZONE
feature.
2
make sure that
3