Table of Contents
Advertisement
04
Basic Setup
Problems when using the Auto
MCACC Setup
If the room environment is not optimal for the
Auto MCACC Setup (too much background
noise, echo off the walls, obstacles blocking
the speakers from the microphone) the final
settings may be incorrect. Check for household
appliances (air conditioner, fridge, fan, etc.),
that may be affecting the environment and
switch them off if necessary. If there are any
instructions showing in the front panel display,
please follow them.
• Some older TVs may interfere with the
operation of the microphone. If this seems
to be happening, switch off the TV when
doing the Auto MCACC Setup.
The Input Setup menu
You only need to make settings in the Input
Setup menu if you didn't hook up your digital
equipment according to the default settings
(see Input function default and possible
settings on page 41). In this case, you need to
tell the receiver what equipment is hooked up
to which terminal so the buttons on the remote
control correspond to the components you've
connected.
1
Switch on the receiver and your TV.
Use RECEIVER to switch on.
RECEIVER
2
Press
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in
Setting the Video options on page 66), you must connect your TV to this receiver using the same type of video cable as
you used to connect your video component.
40
En
on the remote control,
3
Select 'System Setup' from the HOME
MENU.
4
Select 'Input Setup' from the System
Setup menu.
4.SystemSetup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
INPUT
Input Name
Input Skip
Digital In
Exit
HDMI Input
Component In
Exit
5
Select the input function that you want to
set up.
The default names correspond with the names
next to the terminals on the rear panel (such as
DVD or VIDEO) which, in turn, correspond
with the names on the remote control.
6
Select the input(s) to which you've
connected your component.
For example, if your DVD player only has an
optical output, you will need to change the
DVD input function's Digital In setting from
COAX-1 (VSX-1019AH model)/COAX (VSX-
919AH model) (default) to the optical input
you've connected it to.The numbering (OPT-1
to 2) corresponds with the numbers beside the
inputs on the back of the receiver.
• If your component is connected via a
component video cable to an input
terminal other than the default, you must
tell the receiver which input terminal your
component is connected to, or else you
may see the composite video signals
instead of the component video signals.
4b.Input Setup
A/V RECEIVER
:
DVD
:
Rename
:
OFF
:
COAX-1
Return
:
- - -
:
Comp-1
Finish
1
- Quick Links:
- Resetting the System
Hide quick links:
Advertisement
Table of Contents
