Setting The Video Options - Pioneer VSX-919AH-S Operating Instructions Manual

08 Using other functions

Setting the Video options

There are a number of additional picture
settings you can make using the VIDEO
PARAMETER menu. The defaults, if not stated,
are listed in bold.
Important
• Note that if an option cannot be selected
on the VIDEO PARAMETER menu, it is
unavailable due to the current source,
setting and status of the receiver.
• The VIDEO PARAMETER menu cannot be
used when the input function is set to
iPod/USB, CD, CD-R, AUX, TUNER, BD or
HDMI 1 to 2 (VSX-919AH model)/3 (VSX-
1019AH model).
Setting
V. CONV
(Digital Video Conversion)
a
(Resolution)
RES
*VSX-1019AH model only
b
(Aspect)
ASP
*VSX-1019AH model only
c,d,e
IP CONV
(I/P Converter)
*VSX-919AH model only
Note
1 • All of the setting items can be set for each input function.
• Setting items other than V. CONV can only be selected when V. CONV is set to ON.
66
En
What it does
Converts video signals for output from the MONITOR OUT jacks
(including HDMI OUT connector) for all video types (see page 22).
Specifies the output resolution of the video signal (when analog
video input signals are output at the HDMI OUT connector, select
this according to the resolution of your monitor and the images
you wish to watch).
Specifies the aspect ratio when analog video input signals are
output at the HDMI output. Make your desired settings while
checking each setting on your display (if the image doesn't match
your monitor type, cropping or black bands appear).
480i/576i analog video signals are converted to progressive
signals for output.
When set to AUTO, the signals are output with the optimum
setting for the connected display by HDMI.
When set to ON, the signals are up-converted to 480p/576p for
output.
When set to OFF, the signals are not converted for output.
1 Press RECEIVER , then press VIDEO
PARAMETER.
Use / to select the setting you want to
2
adjust.
Depending on the current status/mode of the
receiver, certain options may not be able to be
selected. Check the table below for notes on
this.
Use / to set it as necessary.
3
See the table below for the options available for
1
each setting.
4 Press RETURN to confirm and exit the
menu.
Option(s)
ON
OFF
AUTO
PURE
480p/576p
720p
1080i
1080p
THROUGH
NORMAL
AUTO
ON
OFF