Checking Mcacc Data; Speaker Setting; Channel Level - Pioneer VSX-919AH-S Operating Instructions Manual

10 The Advanced MCACC menu

Checking MCACC Data

At the procedure of Automatically setting up for
surround sound (Auto MCACC) on page 37, the
procedure of Automatic MCACC (Expert) on
page 77 or after fine-adjusting at Manual
MCACC setup on page 81, you can check your
calibrated settings using the GUI screen.
RECEIVER
1 Press
A Graphical User Interface (GUI) screen appears
on your TV. Use /// and ENTER to
navigate through the screens and select menu
items. Press RETURN to confirm and exit the
current menu.
2 Select 'MCACC Data Check' from the
HOME MENU.
HOME MENU
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
a. Speaker Setting
b. Channel Level
c. Speaker Distance
d. Standing Wave
e. Acoustic Cal EQ
Exit
Exit
3 Select the setting you want to check.
• Speaker Setting – Used to check the
settings of the speaker systems. See
Speaker Setting below for more on this.
• Channel Level – Used to check the output
level of the different speakers. See Channel
Level below for more on this.
• Speaker Distance – Used to check the
distance to the different speakers. See
Speaker Distance on page 89 for more on
this.
• Standing Wave – Used to check the
standing wave control filter settings. See
Standing Wave on page 89 for more on this.
88
En
, then press HOME MENU.
A/V RECEIVER
2.MCACC Data Check
A/V RECEIVER
Return
Return
• Acoustic Cal EQ – Used to check the
calibration values of the listening
environment's frequency response. See
Acoustic Cal EQ on page 89 for more on
this.
4 Press RETURN to go back to MCACC Data
Check menu, repeating steps 2 and 3 to check
other settings.
5 When you're finished, press RETURN.
You will return to the HOME MENU.

Speaker Setting

Use this to display the speaker size and
number of speakers. See Speaker Setting on
page 94 for more on this.
1 Select 'Speaker Setting' from the MCACC
Data Check menu.
2a.Speaker Setting
A/V RECEIVER
Front : LARGE
Center : SMALL
Surr : SMALL
SB : SMALL x 2
SW : YES
Exit
2 Select the channel you want to check.
Use / to select the channel. The
corresponding channel on the layout diagram
is highlighted.

Channel Level

Use this to display the level of the various
channels. See Channel Level on page 95 for
more on this.
Return