Copying Mcacc Preset Data; Clearing Mcacc Presets - Pioneer VSX-919AH-S Operating Instructions Manual

The Advanced MCACC menu

Copying MCACC preset data

If you want to manually adjust the Acoustic
Calibration EQ (see Manual MCACC setup on
page 81), we recommend copying your current
1
settings to an unused MCACC preset. Instead
of just a flat EQ curve, this will give you a
reference point from which to start.
1 Select 'MCACC Memory Copy' from the
Data Management setup menu.
3.Data Management
A/V RECEIVER
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3b.MCACC Memory Copy
Copy :
From :
To :
Exit
Exit
2 Select the setting you want to copy.
• All Data – Copies all the settings of the
selected MCACC preset memory.
• Level & Distance – Copies only the channel
level and speaker distance settings of the
selected MCACC preset memory.
3 Select the MCACC preset you'll be
copying the settings 'From', then specify
where you want to copy them ('To').
Make sure you don't overwrite an MCACC
preset you're currently using (this can't be
undone).
4 Select 'OK' to confirm and copy the
settings.
When MCACC Memory Copy? is displayed,
select YES. If NO is selected, the memory is not
copied.
Completed! shows in the GUI screen to
confirm the MCACC preset has been copied,
then you automatically return to the Data
Management setup menu.
Note
1 The settings made in Automatically setting up for surround sound (Auto MCACC) on page 37 or Automatic MCACC
(Expert) on page 77.
A/V RECEIVER
All Data
M1.MEMORY 1
M1.MEMORY 1
Return
OK
Cancel

Clearing MCACC presets

If you are no longer using one of the MCACC
presets stored in memory, you can choose to
clear the calibration settings of that preset.
1 Select 'MCACC Memory Clear' from the
Data Management setup menu.
3.Data Management
A/V RECEIVER
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3c.MCACC Memory Clear
Clear :
Exit
Exit
2 Select the MCACC preset you want to
clear.
Make sure you don't clear an MCACC preset
you're currently using (this can't be undone).
3 Select 'OK' to confirm and clear the
preset.
When MCACC Memory Clear? is displayed,
select YES. If NO is selected, the memory is not
cleared.
Completed! shows in the GUI screen to
confirm the MCACC preset has been cleared,
then you automatically return to the Data
Management setup menu.
A/V RECEIVER
M1.MEMORY 1
Return
OK
Cancel
10
91
En