Automatic Mcacc (Expert) - Pioneer VSX-919AH-S Operating Instructions Manual

The Advanced MCACC menu

Automatic MCACC (Expert)

If your setup requires more detailed settings
than those provided in Automatically setting up
for surround sound (Auto MCACC) on page 37,
you can customize your setup options below.
You can calibrate your system differently for up
to six different MCACC presets
useful if you have different listening positions
depending on the type of source (for example,
watching movies from a sofa, or playing a video
game close to the TV).
Important
• Make sure the microphone/speakers are
not moved during the Auto MCACC Setup.
• Using the Auto MCACC Setup will
overwrite any existing settings for the
MCACC preset you select.
• The screen saver will automatically appear
after five minutes of inactivity.
CAUTION
• The test tones used in the Auto MCACC
Setup are output at high volume.
®
THX
THX is a trademark of THX Ltd., which may be
registered in some jurisdictions. All rights
reserved.
Note
1 These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management
on page 90.
2 You may also want to have separate calibration settings for the same listening position, depending on how you're
using your system.
3 Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).
1
, which are
2
3
1 Select 'Auto MCACC' from the Advanced
MCACC menu, then press ENTER.
If the Advanced MCACC screen is not
displayed, refer to Making receiver settings from
the Advanced MCACC menu on page 76.
1.Advanced MCACC
A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
ALL
SYMMETRY : M1.MEMORY 1
ALL CH ADJ : M2.MEMORY 2
FRONT ALIGH : M3.MEMORY 3
Exit
THX Speaker :
Exit
2 Select the parameters you want to set.
Use / to select the item, then use / to
set.
1b.Auto MCACC
A/V RECEIVER
ALL Speaker Setting
Channel Level
SYMMETRY : M1.MEMORY 1 Speaker Distance
ALL CH ADJ : M2.MEMORY 2 EQ Pro & S-Wave
FRONT ALIGH : M3.MEMORY 3
THX Speaker : NO
START
ALL
SYMMETRY : M1.MEMORY 1
Exit
ALL CH ADJ : M2.MEMORY 2
FRONT ALIGH : M3.MEMORY 3
THX Speaker :
Exit
1b.Auto MCACC
A/V RECEIVER
Speaker Setting
Channel Level
Speaker Distance
EQ Pro & S-Wave
Return
NO
START
Return
1b.Auto MCACC
A/V RECEIVER
Speaker Setting
Channel Level
Speaker Distance
Return
EQ Pro & S-Wave
NO
START
Return
10
77
En