Where To Modify The Ct Configuration - Smappee Plus Installation Manual

Where to Modify the CT configuration

Overview
As mentioned before, there are various methods for modifying the CT configuration:
1. in the App, during the installation steps
2. in the App, after the installation steps
3. in the Expert Portal website
This section explains the benefits of each method, as well as how to use it
Using the Configuration Methods
The table explains in which situations each of the configuration methods can be usefully
applied.
Method
1 App, during
installation
2 App, after
installation
3 In the Expert
Portal website
App, during installation
This method will be automatically started as part of each installation in the App. Once
you have successfully connected Smappee to your account, the App will automatically
start the configuration steps.
Smappee Plus Installation Manual
Version 1.6.2 B, 20-06-2017, rev 4
When to use
As a first quick configuration during an
installation, for simple settings.
To repeat or modify the configuration after
the initial installation.
For advanced installations and error
diagnostics.
Expertise
level
Medium
Medium
Expert
Page 21 of 32