Smappee Plus Installation Manual page 19

Colors of the Smappee Light
The table below provides an overview over all colors that may be shown during the
installation.
Color
Green Breathing
Blue Steady
Green Steady
Blue Flashing
Red Steady
Red Flashing
Orange Steady
Orange Flashing
Colors of 4G dongle
If your Smappee Plus is connected by 4G dongle, please check the colors of the dongle.
Color
Any steady
(Blue, Green, Cyan)
Any slow blinking
(Blue, Green, Cyan)
Green fast blinking
(1 per second)
Remember: The dongle needs to be inserted BEFORE you power-on the Smappee Plus.
Smappee Plus Installation Manual
Version 1.6.2 B, 20-06-2017, rev 4
Description
All good. The monitor is working correctly. You can continue
the next steps for installation and configuration.
The monitor is starting up. This may take up to 3 minutes.
The light may briefly go dark during that time.
Network connectivity successful, but Smappee not yet
connected to a user account.
Ethernet: Connected to the local network.

Wi-Fi: Connected to the Wi-Fi and the local network

(i.e. the Wi-Fi password is correct)
4G dongle: Connected to the 4G network.

The monitor is ready to be connected to the local Wi-Fi
network and to be installed on the App.
The monitor is missing connectivity with internet during
startup. Connection issue.
The monitor had a previous working internet connection but
has now lost connectivity to the internet.
The Wi-Fi hotspot access point has been activated, in order
to allow the Smappee to receive a new Wi-Fi password.
Smappee is trying to open an Wi-Fi hotspot access point.
Please wait a few seconds. The light will turn Orange Steady
in a few moments.
Description
Successfully connected. The dongle is successfully
connected to the cellular network.
The dongle is registering with a cellular network.
Stick is powered on. No connection.
Page 19 of 32