Mitel 6930 User Manual page 141

Mitel 6930 SIP Phone User Guide
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the Xfer softkey.
3. Press the
highlight a directory entry (or the desired number if the entry contains more than one number).
Note: If you have any additional Directory sources configured, you will need to first
navigate to the desired Directory folder and then highlight the respective entry or number.
4. Complete either a blind or consultative transfer:
a. To complete a blind transfer, press the select button to call the contact and then press the
Xfer softkey before the receiving end answers.
b. To complete a consultative transfer, press the select button to call the contact. Remain on
the line to speak with Party 2 before pressing the press the softkey configured with Transfer
functionality or Xfer softkey again to transfer Party 1 to Party 2.
To cancel the transfer, press the Cancel softkey on the display screen or press
cxlii
(Directory) key or the softkey configured for Directory functionality and
.