Configuring A Sprecode Key Using The Mitel Web Ui; Park/Pickup Keys - Mitel 6930 User Manual

automatically activates a service provided by the server. The value you enter for this field is
dependent on the services provided by the server. Contact your System Administrator for information
about available services.

Configuring a Sprecode Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 44 on the Top keys.
or
Select from Key 1 through Key 24 on the Bottom keys.
3. In the Type field, select Sprecode.
4. In the Label field, enter a label to display on the IP phone for this key.
5. In the Value field, enter the appropriate value for accessing specific services from the server.
Note: For values to enter in this field, contact your System Administrator.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84 (M695).
8. In the Type field, select Sprecode.
9. In the Value field, enter the appropriate value for accessing specific services from the server.
Note: For values to enter in this field, contact your System Administrator.
10. Click Save Settings.

Park/Pickup Keys

The 6930 phone has a park and pickup call feature that allows you to park a call and pickup a call
when required. The park/pickup feature performs as follows:
Configuring Softkeys
ciii