Configuring a Paging Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 44 on the Top keys.
or
Select from Key 1 through Key 24 on the Bottom keys.
3. In the Type field, select Paging.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter a multicast IP address and a port number for the Paging key. When
you press this key, the phone initiates an outgoing multicast RTP session to the specified address
using the specified port (e.g. 239.0.1.15:10000).
Notes:
When you select Paging for the Type field, the Line field is disabled.
1.
The Value field allows for one multicast address entry only.
2.
Configuring Softkeys
cxxi