Installation And Setup - Mitel 6930 User Manual

Mitel 6930 SIP Phone User Guide
• Access to a Trithroughl File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer
(SSL) (HTTPS)
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended)
• Category 5/5e straight-through cabling (Category 6 straight-through cabling required for opti-
mum Gigabit Ethernet performance)
• Power source:
• For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet
cable to connect from the phone directly to the network for power (no 48V AC power adapter
required if using Power-over-Ethernet [PoE])
• For Ethernet networks that DO NOT supply power to the phone:
• Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no.
GT-41080-1848 (sold separately) to connect from the DC power port on the phone to a
power source
or
• Use a PoE power injector or a PoE switch

Installation and Setup

If your System Administrator has not already setup your 6930 phone, please refer to the Mitel 6930
Installation Guide for basic installation and physical setup information. For more advanced
administration and configuration information, System Administrators should refer to the Mitel SIP
IP Phones Administrator Guide.
xiv