Subscribe to Our Youtube Channel
Related Manuals for FLIR CM174 C
Summary of Contents for FLIR CM174 C
- Page 1 REFERENCE GUIDE FLIR CM174 CLAMP METER IMAGING CLAMP METER with IGM TRUE RMS 600A AC/DC CLAMP METER ...
- Page 2 CM174 REFERENCE GUIDE ‐ USER GUIDE LOCATION: The detailed User Guide is located in the product packaging and on the support.flir.com web site (download tab). The User Guide covers the CM174 in great detail, please read the entire Guide before use. Register for Extended Warranty and Product Updates at www.flir.com/testwarranty POWER Turn the function switch to any position to power ON. The meter is powered by four (4) 1.5V ‘AAA’ batteries. Auto Power OFF (APO) occurs after 10 mins. of inactivity. Disable APO in the programming menu (next page). FUNCTION SWITCH For connecting to Flex Clamp Adaptor Low impedance mode Meter Power OFF AC/DC Voltage testing Resistance and continuity tests FRONT DESCRIPTION BACK DESCRIPTION Jaw opening trigger Work Light Capacitance and diode tests MODE, Hz, up arrow button Thermal Imaging Lens VFD, Work light, down arrow Tripod Mount AC/DC Current Clamp tests ...
- Page 3 6. Battery status 7. Auto Power OFF Laser pointer ON or OFF 8. Cross hairs 9. Palette scale Temp. units C or F 10. Emissivity setting Cross hairs ON or OFF The Thermal Imager measures a targeted surface’s temperature. Color variations reflect temperature differences: lighter colors = Diode modes CLASSIC or SMART mode higher temperatures and darker colors = cooler temperatures. Auto Power OFF OFF, 1, 2, 5, or 10 minutes The Distance to Spot (target) ratio is 30:1 so at a distance of 30” the target spot is 1”. Use the Cross hairs and Laser pointer to Help Screen Contact information optimize surface targeting. WARNING: Do not point the laser beam toward the eyes; Information Firmware and calibration info prolonged exposure may cause injury. FLIR CM174 REFERENCE GUIDE Document Identifier: CM174‐QS‐mul_AA ...
- Page 4 USA – NASHUA USA – PORTLAND Support Site Corporate Headquarters FLIR Commercial Systems, Inc. FLIR Systems, Inc. 9 Townsend West 2770 SW Parkway Avenue Nashua, NH 03063 USA Wilsonville, OR 97070 USA Telephone +1 855‐499‐3662 Telephone: +1 503‐498‐3547 Customer Support Technical Support Website http://support.flir.com Technical Support Email TMSupport@flir.com Service and Repair Email Repair@flir.com Customer Support Telephone +1 855‐499‐3662 option 3 (toll free) Certificate of Conformity and ISO‐9001 Quality Management System FLIR Commercial Systems, Inc., an ISO 9001:2008 certified company, hereby certify that our instruments meet or exceed the specifications stated in the user manuals. This instrument was produced under the stringent guidelines of FLIR Commercial System’s certified ISO‐9001 Quality Management System from design to delivery. All instruments are calibrated and inspected to meet the stated specifications. FLIR Commercial Systems, Inc. inspects its incoming shipments using an approved sampling plan with an Acceptable Quality Level (AQL). All incoming inspections are performed using test equipment that is traceable to National Standards. Our ISO‐9001 Quality Management System extends to aftermarket support where tested quality procedures are applied to customer support, service, calibration and repair processes. This instrument will provide years of reliable service when used in accordance with the instructions provided in the User Guide. To have this device certified please contact your local service center. Quality Assurance Management Publication Identification No.: CM174‐QS‐mul Release version: ...
Need help?
Do you have a question about the CM174 C and is the answer not in the manual?
Questions and answers