Options Of Rf Filter - HDL -MCIP-RF.10 User Manual

User Manual
HDL-MCIP-RF.10
specified Subnet ID device in HDL BUS system. It's white list. E.g. if select 4 for it, the
gateway will filter all other devices' commands except the Subnet 4's, then to reduce the
communication burden of Subnet 4.
For the beginning to configure the system, normally select 'All Through' for it; after that,
better to select the specified Subnet ID for the mesh gateway according to the situation.
Note: Only the mesh mode displays this option.

6.3.2 Options of RF Filter

Those RF devices' commands which enabled in below table will be filtered by the gateway.
The limitation can be specific to Source address, Command and Destination address. It's
black list.
Note: Only the mesh mode displays this option.
18
Mesh Gateway – User Manual