Device Description - HDL -MCIP-RF.10 User Manual

1.3 Device Description

Mesh Gateway – User Manual
User Manual
HDL-MCIP-RF.10
○
a . Programming Button:
Long press the 'PROG' button
10s, then its IP and IP MAC will
be reset to the factory settings.
○ b . Antenna: transmit and receive
wireless signals
○ c . RJ45: Ethernet port RJ45
○ d . DC24V: Power Supply, no
need to use it if connected the HDL
Bus interface (the DC power is
provided from it)
HDL Buspro interface
○
f .MODE LED: RED LED flashing
quickly under wireless setup mode;
GREEN LED flashing when network
jams.
○ g . T/R LED: BLUE LED flashing
when transmitting or receiving the
wireless signal.
2