Table of Contents
Advertisement
User Manual
HDL-MCIP-RF.10
- Remote Server
This mode is suitable for both travelling programmer and end user to configure and control
HDL wireless system via Internet. Since a server is getting involved in this mode, no static
public IP is needed for HDL wireless system because the HDL-MCIP-RF.10 in Remote
Server mode will keep updating itself to the server, programmer and end user can always
get info of the remote HDL-MCIP-RF.10 from the server and later access the HDL wireless
system directly.
Schematic diagram:
Configuration steps:
1. Change the default IP and IP MAC, to avoid possible conflict.
2. Set your Project Name, Group Name, User, PWD and click Apply.
14
Mesh Gateway – User Manual
Advertisement
Table of Contents
