Table of Contents
Advertisement
User Manual
HDL-MCIP-RF.10
2. Select "P2P", fill in "Project Name", "Group Name", "User", "PWD". The "User IP" is the
public IP of
Router R2
(see diagram above), the "Port" is the one you are going to fill in the
Router R2
when setting up port forwarding. Some routers support Internal port and
External port mapping, some do not, there is only one port, or you can take it as External
port equals Internal port, to simplify, we suggest to use the port
6000
for all ports.
3. Configure port forwarding in Router R1
Map UDP port 6000 to the IP of mesh gateway
11
Mesh Gateway – User Manual
Advertisement
Table of Contents
