Table of Contents
Advertisement
User Manual
HDL-MCIP-RF.10
4. Configure port forwarding in Router R2
Map UDP port 6000 to the IP of PC/laptop that runs HDL-BUS Pro Setup Tool.
5. Run HDL-BUS Pro Setup Tool on the PC/laptop with the IP set in the Router R2, in this
doc, it is 192.168.1.100.
6. Select 'Internet', in the pop up window below select "P2P" and fill in the "Group Name",
"Project Name", "User", "Password". The "IP" is the public IP of Router R1, the "Port" is the
one set in Router 1, the UDP 6000.
12
Mesh Gateway – User Manual
Advertisement
Table of Contents
