Webasto Thermo 50 Installation Instructions Manual page 42

Hide thumbs Also See for Thermo 50:

Table of Contents

Available languages

Thermo 50

The fuel must be taken from the vehicle fuel tank or from a separate tank

(see Figs. 8, 9 and 10). This separate fuel pickup precludes any effect

of pressure.

Tank connector

Tank fitting

Fig. 8:

Fuel pickup from the plastic tank

(Pickup via tank fitting)

NOTE:

Deburr the cut on the tank connector after sawing it off and remove any

metal chips.

Sealing ring

Fig. 9:

Fig. 10: Webasto tank connector

NOTE on Fig. 10:

The fitting must be made from metal!

Plastic tank

Sealing ring

Fuel pickup from the plastic tank

(Pickup via tank drain screw)

Hole pattern

Fuel supply

Only use a tank connector if the

fuel tank is made from metal

Table of Contents

Thermo 50 pme