Connection; Connecting With A Phone; Disconnecting From A Phone; Using The Watch In A Medical Facility Or Aircraft - Casio 5512 Operation Manual

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, perform the procedure
under "C Pairing the watch with a
pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
e, hold down the (C) button for about 2
seconds.
This causes the second hand to move
●
to 12 o'clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde dial hand will move from
●
"R" to e when a connection is
established between the watch and
phone.
Important!
The watch cannot connect with a
●
phone while a stopwatch time
measurement operation is in
progress.
If you have problems establishing a
●
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone's home
screen, tap the "CASIO WATCH+"
icon. After the app starts up, hold
down the watch's (C) button for
about 2 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with:
use CASIO WATCH+ to select
"Watch settings" n "Connection
time", and then specify a setting of 3
minutes, 5 minutes, or 10 minutes.
Operation Guide 5512

Disconnecting from a Phone

Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
phone" to
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 2
seconds.
This causes the second hand to move
●
to 12 o'clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde dial hand will move from
●
"R" to e when a connection is
established between the watch and
phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
After disconnection
2.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
Note
A X Pull out the crown to the second
click.
B X Hold down (D) for about 5
seconds.
This causes the second hand to
perform one revolution and deletes the
pairing information.
C X Push the crown back in.
Connected After disconnection
If you are unable to re-pair the watch
●
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
Crown
10