VTech S1310 Master User Manual page 32

Installation
SIP classic cordless 1-line/2-line - S1410/S1420
Handset battery installation
Place the battery with the label THIS SIDE UP
To replace the handset cover, align all the tabs on the handset cover against the corresponding grooves on the handset, then
1
Replace a handset battery
Use a narrow object to open the screw cover and then
slot, then twist and lift to remove the handset
Screw
cover
Follow Step 2 to Step 4 in Handset battery installation
CAUTIONS:
•
replacement battery (BT266342)
•
• Dispose of used batteries according to the information in The RBRC
Handset registration
4 registered handsets, you can replace one of them by a new handset if any one of the 4 registered handsets is disconnected from
the base F
Register a handset to another telephone base
Handset battery charging
2
FCC ID
-888-907-2007
3
Insert a 5 mm standard screwdriver in the provided
Use only the supplied rechargeable battery (BT264392/BT266342) or
®
seal on page 76
MESSAGE WAITING
CHARGE
29
4
When you already have