Telephone operation
SIP contemporary cordless 2-line - S2420
To answer an intercom call:
•
handset when it is not cradled on the telephone base,
-OR-
•
Press INT or
/SPEAKER
To answer an incoming call during an intercom call:
To end an intercom call:
•
Press OFF or place the handset back in its charging
-OR-
•
Press INT or
/SPEAKER
Conference call
To initiate a conference call:
Press HOLD
Once the second party is on the line, press CONF
To initiate a conference call while both calls are on hold:
Press CONF
To switch a conference call from the telephone base to the cordless handset:
•
During a conference call on the telephone base, press
•
During a conference call on the telephone base, press HOLD on the telephone base and then press CONF on the
To switch a conference call from the cordless handset to the telephone base:
•
During a conference call on the cordless handset, press
•
During a conference call on the cordless handset, press HOLD on the cordless handset and then press CONF on the
To end a conference call:
•
Press
•
When the conference call is at the telephone base, press
•
When the conference call is on the cordless handset, press OFF on the cordless handset, or place it back in the telephone base,
charging base or charging stand
•
When there is more than one cordless
Find handset
To start paging:
Press
/FIND HANDSET
To end paging:
•
Press
/FIND HANDSET
-OR-
•
Computer port
You can route your computer through the COMPUTER
USB port
The
port on the side of the telephone base can be used for charging devices
base, charging base or charging stand, or press INTERCOM on the cordless
/SPEAKER or CONF
/SPEAKER or CONF
/SPEAKER or CONF
/SPEAKER
Charging will be suspended