Managing The Switch; Displaying Information About The Installed Hardware Modules - Cisco Nexus 9508 Hardware Installation Manual

Managing the Switch

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Displaying Information About the Installed Hardware Modules

You can display information about the switch hardware and the hardware modules installed in the switch
chassis by using the show hardware command.
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Displaying Information About the Installed Hardware Modules, page 47
Displaying the Hardware Inventory for a Switch, page 51
Displaying the Backplane and Serial Number Information, page 51
Displaying Environmental Information for the Switch, page 53
Displaying the Current State of a Module, page 54
Displaying Temperatures for a Module, page 56
Connecting to a Module, page 58
Saving the Module Configuration, page 59
Shutting Down or Starting Up a Module, page 59
Purging a Nonfunctioning Module from the Running Configuration, page 60
Displaying Power Usage Information, page 60
Power Cycling a Module, page 61
Rebooting a Switch, page 62
Overview of Supervisor Modules, page 63
Overview of Line Card Support, page 65
Overview of Fabric Modules, page 66
Overview of Power Modes, page 68
Overview of Fan Trays, page 73
C H A P T E R
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
5
47