Cisco Nexus 9508 Hardware Installation Manual page 144

Accessory Kit
Illustration
Not applicable
Not applicable
Not applicable
If you do not receive a part listed in this document, contact Cisco Technical Support at this URL:
Note
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
If you purchased this product through a Cisco reseller, you might receive additional contents in your kit,
such as documentation, hardware, and power cables.
The product shipment includes a power cord for each 3-kW AC or Universal AC/DC power supply. You must
supply a grounding cable (6 AWG recommended) for up to 45 A.
The shipped cables depend on your specification when placing an order. The available power cords are as
follows:
• AC power supply cords
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
134
◦CAB-AC-16A-AUS—power cord, 250-VAC 16 A, C19, Australia
◦CAB-AC-16A-CH—power cord, 16 A, China
◦CAB-AC-2500W-EU—power cord, 250 VAC 16 A, Europe
◦CAB-AC-2500W-INT—power cord, 250 VAC 16 A, International
Description
Cable tie, 8.5 inches (10)
ESD wrist strap (disposable)
Hazardous substances list for customers in
China
Cisco Information Packet
1-Year Limited Warranty for Hardware
Additional Kits
Quantity
1
1
1
1
1