Table of Contents
Advertisement
Chapter 6: Certify Fiber Cabling
Autotest in Loopback Mode
Caution
Do not disconnect the
Fiber
output (
) after you set
the reference.
When you use the EF-TRCs,
DO NOT use other
mandrels.
Test
reference
cord
Reference
TRC Verification
Fiber Test
*Use the EF-TRCs only with multimode modules.
GPU131.EPS
Figure 50. Connections for Loopback Mode
(1 Jumper Reference, Multimode Fiber)
129
Advertisement
Table of Contents
