Table of Contents
Advertisement
How to Use the Touchscreen
The Versiv main unit's Taptive
touchscreen to control the tester. You can operate the
touchscreen with your fingertip or with a stylus that is made for
projected capacitance touchscreens.
For correct operation and to prevent damage to the
touchscreen:
Touch the screen only with your fingers or with a
stylus that is made for projected capacitance
touchscreens. Do not use too much force.
Do not touch the screen with sharp objects.
The touchscreen will not respond if you tap it with
your fingernail or an incorrect type of stylus or if
you wear non-conductive gloves.
To use the touchscreen
To select an item on the screen, tap the item lightly with your
fingertip.
To scroll a screen, lightly touch the screen then move your
fingertip in the direction you want the screen to move.
On screens that show a plot, trace, or FiberInspector image,
you can drag some items, such as the measurement cursor on
a plot or trace or the image on a FiberInspector screen. These
screens also have a zoom function, as shown in Figure 3.
To clean the touchscreen
Turn off the tester, then use a soft, lint-free cloth that is moist
with a mild detergent.
When you clean the touchscreen, do not let liquid
get under the plastic around the touchscreen.
How to Use the Touchscreen
™
user interface lets you use a
Caution
Note
Caution
Chapter 1: Get Acquainted
15
Advertisement
Table of Contents
