Set Up A Project; The Project Screen - Fluke Versiv User Manual

Versiv Cabling Certification Product Family
Users Manual

Set Up a Project

Refer to the PROJECT screen in Figure 85 on page 213.
On the home screen, tap the PROJECT panel, tap CHANGE
1
PROJECT, then tap NEW PROJECT.
On the NEW PROJECT screen, enter a name for the project,
2
then tap DONE.
On the PROJECT screen, tap the Operator panel to enter an
3
operator name for the project.
On the PROJECT screen, tap the NEW TEST button to enter
4
the tests and test settings necessary for the project.
On the PROJECT screen, tap the NEW ID SET button to make
5
one or more sets of cable IDs for the project. See the CABLE ID
SETUP screen in Figure 86 on page 216.
On the PROJECT screen, tap DONE.
6

The PROJECT Screen

To start a new project, tap the PROJECT panel on the screen.
Figure 85 shows the PROJECT screen and describes the items you
enter to make a project.
 The name of the project. See also item
 Operator: The name of the person who will do the tests for the
project.
The date range for the results in the project.

Results: A summary of the test results in the project:

: The number of tests that failed.
: The number of tests that passed.
212
 .