Fm Wire Antenna; Connecting The Power - Pioneer XV-HTD330 Operating Instructions Manual

Connecting up
• It's also possible to fix the AM antenna to
a wall using two screws (see illustration
below). Before fixing, make sure that the
reception is satisfactory.

FM wire antenna

• Connect the FM wire antenna to the
FM UNBAL 75Ω terminal in the same way
as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.
• The signal ground ( ) is designed to
reduce noise that occurs when an
antenna is connected. It is not an
electrical safety ground.

Connecting the power

Before connecting the power and switching
on for the first time make sure that everything
is connected properly.
AC IN
FM
UNBAL
75
AM LOOP
ANTENNA
1 Plug one end of the supplied power
cable into the AC INLET.
2 Plug the other end into a household
power outlet.
• See Connecting auxiliary components on
page 77 for details of other connections
you can make with this system.
02
Power outlet
19
En