Listening To Other Sources - Pioneer XV-HTD330 Operating Instructions Manual

04 Getting started

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Listening to TV audio through this system on
page 17 and Connecting auxiliary components
on page 77.
1 If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• If you're using the remote control, press
TV to select the TV input, or use the LINE
(L1/L2) button to select the LINE 1 or LINE
2 input.
• Using the front panel controls, the TV/L1/
L2 button switches between the three
inputs.
3 If necessary, start playback of the
external source.
36
En
STANDBY/ON
L1/L2
TV LINE