Pioneer XV-HTD330 Operating Instructions Manual page 22

03 Controls and displays
6 PGM (page 47)
Lights when a program list has been
programmed.
7 RPT and RPT-1 (page 45)
RPT lights during repeat play. RPT-1 lights
during repeat one-track play.
8 RDM (page 46)
Lights during random play.
9 ATT (page 78)
Lights when the input attenuator is active for
the currently selected analog input.
10 REC MODE (page 78)
Lights when Rec Mode is on.
11 Timer indicators (page 58)
Lights when the timer is set
Lights when the sleep timer is active
12 2 PRO LOGIC II (page 37)
Lights during Dolby Pro Logic decoding.
13 2 DIGITAL (page 37)
Lights during playback of a Dolby Digital
source.
22
En
14 Speaker indicators
These show which speakers are being used to
output the current source. The illustrations
below show some example displays.
5.1 channel surround sound
Stereo (2.1 channel) sound
3.1 channel sound with Dialogue
enhancement on the center
channel
5.1 channel surround sound with
Virtual Surround Back mode active
(When headphones are connected, none of
the speaker indicators are lit.)
15 PRGSVE (page 67)
Lights when progressive scan video output is
selected.
16 ADV.SURR (page 39)
Lights when one of the Advanced Surround
listening modes is selected.
17 DTS (page 37)
Lights during playback of a DTS source.
18 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM)
19 Character display
20 (page 53)
Lights during multi-angle scenes on a DVD
disc