Table of Contents
Advertisement
12
Additional information
Problem
Sound is mono only.
Considerable noise in radio
broadcasts.
Error Messages
Message
Child Lock
Rec Mode On
Phones In
96K Stereo
No Surr. SP
Muting
Exit
82
En
Remedy
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 35).
• Tune into the correct frequency.
• Connect the antenna (see Connecting the supplied antennas on
page 18 and Connecting external antennas on page 77).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see Connecting external antennas
on page 77).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see AM loop
antenna on page 18 and Connecting external antennas on page 77).
• Turn off any other equipment that may be causing the noise or move
it away from the system unit.
• The tuning interval is incorrect for your country or region. Try
switching the tuning interval (frequency step) (see Changing the
frequency step on page 73).
Desciption
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See Child Lock on page 73 for
more on switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the Recording Mode is on (see Recording mode on page 78).
• Blinks rapidly for 2 seconds when an operation is prohibited
because headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited
because there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the sound is muted (see Muting the sound on page 41).
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
Hide quick links:
Advertisement
Table of Contents
