Fm Wire Antenna; Connecting The Power - Pioneer HTD88DVD Operating Instructions Manual

Connecting up
• It's also possible to fix the AM antenna to a
wall using two screws (see illustration
below). Before fixing, make sure that the
reception is satisfactory.

FM wire antenna

• Connect the FM wire antenna to the FM
UNBAL 75 Ω terminal in the same way as
the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.
• The signal ground ( ) is designed to
reduce noise that occurs when an antenna
is connected. It is not an electrical safety
ground.

Connecting the power

Before connecting the power and switching on
for the first time make sure that everything is
connected properly.
AC IN
VOLTAGE
SELECTOR
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
1 Plug one end of the supplied power
cord into the AC INLET.
2 Plug the other end into a household
power outlet.
• See Connecting auxiliary components on
page 72 for details of other connections
you can make with this system.
120-
127V
220-
230V
240V
Power outlet
02
19
En