Photoviewer - Pioneer XV-HTD330 Operating Instructions Manual

11 Initial Settings menu
Setting/changing the Country Code
You may also want to refer to the Country code
list on page 84.
1 Select 'Country Code'.
Initial Settings
Video Output
Language
Display
Options
2 Use number buttons to enter your
password, then press ENTER.
Initial Settings
Video Output
Language
Display
Options
3 Select a country code.
There are two ways you can do this.
• Select by code letter: Use
up/down) to change the country code.
Initial Settings
Video Output
Language
Display
Options
• Select by code number: Press
right) then use the number buttons to
enter the 4-digit country code (you can
find the Country code list on page 84.)
72
En
Parental Lock Password Change

PhotoViewer

Level Change
Country Code
Parental Lock: Country Code
Password * * * *
Country Code List Code
us
2 1 1 9
(cursor
Parental Lock: Country Code
Password * * * *
Country Code List Code
us
2 1 1 9
(cursor
Initial Settings
Parental Lock: Country Code
Video Output
Language Password
Display
Options
Country Code List
us
4 Press ENTER to set the new Country
Code and return to the Options menu
screen.
• Changing the country code does not take
effect until the next disc is loaded (or the
current disc is reloaded).
PhotoViewer
Default setting: On
•
Initial Settings
Video Output Parental Lock
Language PhotoViewer
Display
Options
This setting is important if you load a disc that
contains both WMA/MP3 audio files and
JPEG picture files.
The default On setting allows you to view only
the JPEG files on this kind of disc. Set to Off
to be able to play the WMA/MP3 audio files.
Note that when this setting is changed, discs
already loaded (other than in the play
position) that contain both WMA/MP3 audio
files and JPEG picture files will show up as
??? in the Disc Navigator and program list
screens until they are reloaded.
* * * *
Code
2 1 1 9
On
Off