02
Connecting up
Connecting to your TV
This system has three different kinds of video
output that you can use to connect up your
TV. Check the available inputs on your TV to
see which you can use.
• Do not connect a VCR between this
system and your TV as DVD playback will
be affected.
•
Use the supplied video cable to
connect the VIDEO OUT jack to a video
input on your TV.
TV
VIDEO
XV–HTD 330
• Placing the system unit too close to your
TV may cause interference, especially if
you're using an indoor antenna. If you
notice interference, move the system unit
away from the TV.
16
En
VIDEO
INPUT
S
S-VIDEO
OUT
P
P
Y
R
B
VIDEO
COMPONENT VIDEO OUT
OUT
FRONT
SUB
SPEAKERS
WOOFER
R
L
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
•
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
TV
CENTER
XV–HTD 330
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 68 for
more on this.
S-VIDEO
INPUT
S
S-VIDEO
OUT
P
P
Y
R
B
VIDEO
VIDEO
COMPONENT VIDEO OUT
OUT
FRONT
SPEAKERS
R
L
SUB
CENTER
WOOFER