Looping A Section Of A Disc; Using Repeat Play - Pioneer XV-HTD330 Operating Instructions Manual

Playing audio and video discs
• The picture quality when using frame
reverse is not as good as frame advance.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When changing direction with a DVD
disc, the picture may 'jump'. This is not a
malfunction.

Looping a section of a disc

The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD-Video and DVD-RW)
that form a loop which is played over and over.
• You can't use A-B Repeat with WMA/MP3
discs, Video CDs in PBC mode,
unfinalized CD-R/RW discs, or VR format
DVD-RW discs.
1 During playback, press HOME MENU
and select 'Play Mode'.
2 Select 'A-B Repeat' from the list of
functions on the left.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
3 Press ENTER on 'A(Start Point)' to set
the loop start point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
4 Press ENTER on 'B(End Point)' to set
the loop end point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
After pressing ENTER, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
5 To resume normal playback, select
'Off' from the menu.

Using repeat play

There are various repeat play options,
depending on the kind of disc loaded. It's also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating and editing a
DVD program list on page 47 and Creating and
editing a non-DVD program list on page 49).
• Repeat play is not available with Video
CDs in PBC mode, or unfinalized CD-R/
RW discs.
06
45
En