Connecting The Fm Antenna; Connecting External Antennas; Use The Pre Out Outputs To Connect The Surround Back Speakers - Pioneer HTP-700 Operating Instructions Manual

02 Connecting up

Connecting the FM antenna

Connect the FM wire antenna as shown below.
To improve reception and sound quality,
connect external antennas (see Connecting
external antennas below).
•
Push the FM antenna plug onto the center
pin of the FM antenna socket.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.

Connecting external antennas

To improve FM reception connect an external
FM antenna to the FM UNBAL 75 Ω.
75 Ω coaxial cable
36
En
Use the PRE OUT outputs to
connect the surround back
speakers
Connect the PRE OUT outputs of the system
and additional amplifier to add a surround
back speaker.
1 2
Surround back speakers
SBL SBR
• You can use the additional amplifier on the
surround back channel pre-outs for a
single speaker as well. In this case plug the
amplifier into the left (L (Single)) terminal
only.
ANALOG
R L
AUDIO IN
Surround back
channel amplifier