Using The On-Screen Displays - Pioneer XV-HTD330 Operating Instructions Manual

04 Getting started
1 If the system isn't already on, press
STANDBY/ON to switch it on.
2 Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
3 Press ENTER.
4 Use the
buttons to select a room type then press
ENTER.
Choose one of the following depending on
your room size:
• S – Smaller than average room
• M – Average room
• L – Larger than average room
5 Use the
buttons to select a seating position
setting, then press ENTER.
Choose one of the following depending on
where your main listening position is:
• Fwd – If you are nearer to the front
speakers than the surround speakers
• Mid – If you are equal distance from the
front and surround speakers
• Back – If you are nearer to the surround
speakers than the front speakers
• The Room Setup automatically sets up
channel levels and channel delay. If you
have already set the channel levels
manually (see Setting the channel levels
on page 62), you will see Room Set? in
the display when you first press the
ROOM SETUP button. If you continue, the
previous settings will be overwritten.
• For more detailed surround sound setup,
see Setting up surround sound on
page 61.
28
En
(cursor up/down)
(cursor up/down)

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you'll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
HOME
MENU
ENTER
Button What it does
HOME Displays/exits the on-screen
MENU display
Changes the highlighted menu
item
ENTER
Selects the highlighted menu
item (both
in exactly the same way)
RETURN Returns to the main menu
without saving changes
RETURN
ENTER
ENTER
buttons work