Dodge B-I-B 1948 Driver Manual page 32

7. Tighten large adjusting bolt nut until tension on the bracket
adjusting screw is just relieved at either end.
8. Lubricate all frictional surfaces of brake control linkage and
bracket adjusting screw with engine oil. See lubrication chart,
page
2l.
I
Free play between the side of the anchor clip at the center of
the band and the anchor must not be more than .005 in., otherwise,
band distortion may result on brake application. This free play,
if excessive, may be reduced by compressing the clip in a vise or
tapping gently with a hammer against a block or anvil.
ANCHOR
CLIP
SCREW
HAND BRAKE ADJUSTMENT
CAB
DRIVER'S SEAT IS ADJUSTABLE
The driver's seat is adjustable and can be moved by releasing the
locking mechanism and sliding the frame forward or backward on
the ways. A lever for releasing the lock is located near the floor
at the center of the seat. In order to slide the seat, lift up on the
lever. Release lever to lock seat in the desired position.
The seat back is hooked to the seat cushion. This feature makes
it possible to adjust the angle of the seat back by moving the
29