Dodge HORNET 2023 Owner's Manual

Table of Contents

Quick Links

Download this manual

2023 DODGE HORNET

OWNER'S MANUAL

Table of Contents

Summary of Contents for Dodge HORNET 2023

Page 1 2023 DODGE HORNET OWNER’S MANUAL...
Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle. FCA US LLC reserves the right to make changes in design and specifications, and/or make additions to or improvements to its products without imposing any obligation upon itself to install them on products previously manufactured.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ..................13 GETTING TO KNOW YOUR INSTRUMENT PANEL ............65 STARTING AND OPERATING ....................80 MULTIMEDIA ..........................129 SAFETY ............................154 IN CASE OF EMERGENCY ....................203 SERVICING AND MAINTENANCE ..................223 TECHNICAL SPECIFICATIONS ....................
Page 4 INTRODUCTION DOORS .................22 UCONNECT VOICE RECOGNITION QUICK Manual Door Locks............22 TIPS — IF EQUIPPED ............33 SYMBOLS KEY ............... 8 Power Door Locks............22 Introducing Voice Recognition........33 ROLLOVER WARNING ............8 Basic Voice Commands ..........33 Keyless Enter ‘n Go™ — Passive Entry .......23 VEHICLE MODIFICATIONS/ALTERATIONS ......
Page 5 GETTING TO KNOW YOUR EXTERIOR LIGHTS...............40 INTERIOR STORAGE AND EQUIPMENT......50 Multifunction Lever ............ 40 Storage .................50 INSTRUMENT PANEL Headlight Switch ............40 USB Control..............51 Power Outlets — If Equipped........52 PREMIUM INSTRUMENT CLUSTER........65 Daytime Running Lights (DRLs) — Instrument Cluster Descriptions ......
Page 6 STARTING AND OPERATING ACTIVE SPEED LIMITER — IF EQUIPPED......90 PARKSENSE FRONT/REAR PARK ASSIST SYSTEM — Activation..............91 IF EQUIPPED ..............105 STARTING THE ENGINE ............80 Exceeding The Set Speed ...........91 ParkSense Sensors ...........105 Normal Starting ............80 Deactivation ..............91 ParkSense Warning Display........105 Cold Weather Operation INTELLIGENT SPEED ASSIST (ISA) —...
Page 7 SAFETY IN CASE OF EMERGENCY TRAILER TOWING............. 121 Common Towing Definitions ........121 SAFETY FEATURES ............154 HAZARD WARNING FLASHERS ........203 Trailer Towing Weights Anti-Lock Brake System (ABS) ........ 154 SOS SYSTEM — IF EQUIPPED..........203 (Maximum Trailer Weight Ratings) ......122 Electronic Brake Control (EBC) System ....
Page 8 SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION UNIFORM FLUID CAPACITIES ............268 TIRE QUALITY GRADES ..........260 ENGINE FLUIDS AND LUBRICANTS........269 SCHEDULED SERVICING ..........223 Treadwear ..............260 CHASSIS FLUIDS AND LUBRICANTS......269 Maintenance Plan............. 224 Traction Grades ............261 ENGINE COMPARTMENT..........226 CUSTOMER ASSISTANCE Temperature Grades ..........
Page 9: Introduction
FCA US LLC reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Dodge® best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.
Page 10: Symbols Key
SYMBOLS KEY Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully. These statements apply to operating procedures that WARNING! could result in a collision, bodily injury and/or death.
Page 11: Symbol Glossary
SYMBOL GLOSSARY Red Warning Lights Some car components have colored labels with symbols indicating precautions to be Electronic Throttle Control (ETC) Warning Light observed when using this component. It is important to follow all warnings when operating page 72 Ú your vehicle.
Page 12 Red Warning Lights Yellow Warning Lights Vehicle Security Warning Light Fuel Cutoff Warning Light page 73 page 74 Ú Ú Fuel Cutoff Failure Warning Light Yellow Warning Lights Ú page 74 Blind Spot Detection Fault Warning Light Fuel Level Sensor Failure Warning Light page 74 Ú...
Page 13 Yellow Warning Lights Yellow Indicator Lights Service Forward Collision Warning (FCW) Light Forward Collision Warning (FCW) OFF Indicator Light page 75 page 77 Ú Ú Service Stop/Start System Warning Light Immobilizer Fail / VPS Electrical Alarm Indicator Light page 75 page 77 Ú...
Page 14 Blue Indicator Lights Green Indicator Lights High Beams Indicator Light Stop/Start Active Indicator Light page 78 page 77 Ú Ú Auto High Beams Active Indicator Light White Indicator Lights page 78 Ú Auto High Beams Active Indicator Light page 78 Ú...
Page 15: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE KEYS NOTE: In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low key fob battery can be verified by referring to the instrument cluster, which will display directions to Your vehicle is equipped with a key fob which supports follow...
Page 16 GETTING TO KNOW YOUR VEHICLE The Panic feature will stay on for three minutes unless you  These alerts will not be activated in situations where  Perchlorate material — special handling may apply. See turn it off by either pushing the Panic button a second time either the vehicle’s engine is left running with the key www.dtsc.ca.gov/hazardouswaste/perchlorate for or driving the vehicle at a speed of 15 mph (24 km/h) or...
Page 17 GETTING TO KNOW YOUR VEHICLE Programming And Requesting Additional Hold the key fob with the button side facing down, and locate the small rectangular gap on the left side Key Fobs between the housing and the back cover of the key Programming the key fob may be performed by an fob.
Page 18: Sentry Key
GETTING TO KNOW YOUR VEHICLE SENTRY KEY CAUTION! The Sentry Key Immobilizer system prevents unauthorized The Sentry Key Immobilizer system is not compatible vehicle operation by disabling the engine. The system with some aftermarket Remote Start systems. Use of does not need to be armed or activated. Operation is these systems may result in vehicle starting problems automatic, regardless of whether the vehicle is locked or and loss of security protection.
Page 19 GETTING TO KNOW YOUR VEHICLE Starting The Engine With A Depleted Key Fob Battery To Stop The Engine With A Depleted Key Fob Battery To reactivate the previously disabled key fob, the vehicles must be either unlocked or started with a key fob. If the ignition state/mode does not change with the push Push and hold the ignition button for several seconds, or of a button, the key fob may have a low or depleted...
Page 20: Remote Start - If Equipped
GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED All of the following conditions must be met before the EMOTE TART engine will remote start: Push and release the Remote Start button on the key fob This system uses the key fob to start the engine ...
Page 21: To Exit Remote Start Mode
GETTING TO KNOW YOUR VEHICLE Manual Temperature Control (MTC) — If Equipped EMOTE TART EMOTE TART RONT EFROST  In ambient temperatures of 40°F (4.5°C) or below, the — I CTIVATION QUIPPED To drive the vehicle after starting the Remote Start climate settings will default to maximum heat, with system, push and release the START/STOP ignition button fresh air entering the cabin.
Page 22: Remote Start Abort Message
GETTING TO KNOW YOUR VEHICLE — If something triggers the system, the Vehicle Security Perform one of the following methods to lock the EMOTE TART BORT ESSAGE system will provide the following audible and visible vehicle: QUIPPED signals:  Push the lock button on the interior power door ...
Page 23: To Disarm The System
GETTING TO KNOW YOUR VEHICLE If the Vehicle Security system is armed and the battery To disable the function, push the Volumetric/Anti-Lift ISARM YSTEM becomes disconnected, the Vehicle Security system will Protection button before deactivating the alarm. The Vehicle Security system can be disarmed using any of remain armed when the battery is reconnected;...
Page 24: Doors
GETTING TO KNOW YOUR VEHICLE DOORS WARNING!  Never leave children alone in a vehicle, or with ANUAL OCKS access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a The front doors can be manually unlocked by pulling the number of reasons.
Page 25: Keyless Enter 'N Go™ - Passive Entry
GETTING TO KNOW YOUR VEHICLE If you push the power door lock switch while the ignition is To Unlock From The Driver's Side Or Passenger’s Side There are three situations that trigger a FOBIK-Safe search in the ON/RUN position, and any door or the liftgate is in any Passive Entry vehicle: With a valid Passive Entry key fob within 5 ft (1.5 m) of open, the power locks will not operate.
Page 26 GETTING TO KNOW YOUR VEHICLE To Lock The Vehicle’s Doors And Liftgate To Unlock/Enter The Liftgate With one of the vehicle’s Passive Entry key fobs within 5 ft With one of the vehicle’s Passive Entry key fobs close to (1.5 m) of either front door handle, push the Passive Entry the liftgate, push the electronic liftgate release button to lock button located on the outside door handle to lock the open the liftgate.
Page 27: Automatic Door Locks
GETTING TO KNOW YOUR VEHICLE — I To Lock The Liftgate EVICE QUIPPED HILD ROTECTION With a valid Passive Entry key fob within 5 ft (1.5 m) of the — R YSTEM OORS The Dead Lock Device is a safety device that prevents the liftgate, push the Passive Entry lock button located on the use of the internal door handles of the vehicle and the outside liftgate door handle.
Page 28: Steering Wheel
GETTING TO KNOW YOUR VEHICLE STEERING WHEEL NOTE: WARNING!  When the Child-Protection Door Lock system is Do not adjust the steering column while driving. engaged, the door can be opened only by using the ELESCOPING TEERING OLUMN Adjusting the steering column while driving or driving outside door handle even though the inside door lock with the steering column unlocked, could cause the This feature allows you to tilt the steering column upward...
Page 29: Driver Memory Settings - If Equipped
GETTING TO KNOW YOUR VEHICLE For information on use with the Remote Start system, see A beep will sound to confirm the memory profile has been successfully stored. page 19. Ú EMORY OSITION ECALL WARNING! To recall the memory settings for driver one or two, push ...
Page 30: Manual Adjustment (Front Seats) - If Equipped
GETTING TO KNOW YOUR VEHICLE ) — While sitting in the seat, lift up on the bar and move the ANUAL DJUSTMENT RONT EATS WARNING! seat forward or rearward. Release the bar once you have QUIPPED reached the desired position. Then, using body pressure, Do not ride with the seatback reclined so that the move forward and rearward on the seat to be sure that the shoulder belt is no longer resting against your chest.
Page 31: Power Adjustment (Front Seats) - If Equipped
GETTING TO KNOW YOUR VEHICLE TO RAISE THE REAR SEAT WARNING! NOTE:  It is extremely dangerous to ride in a cargo area, If interference from the cargo area prevents the seatback inside or outside of a vehicle. In a collision, people from fully locking, you will have difficulty returning the seat riding in these areas are more likely to be seriously to its proper position.
Page 32: Front Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE Reclining The Seatback Forward Or The front heated seats control buttons are located within the Uconnect system. You can Rearward gain access to the control buttons through the The seatback can be reclined both forward and rearward. climate or controls screen.
Page 33: Front Ventilated Seats
GETTING TO KNOW YOUR VEHICLE — — I RONT ENTILATED EATS RMREST QUIPPED ESTRAINTS QUIPPED The center part of the rear seat can also be used as a rear Head restraints are designed to reduce the risk of injury by armrest with cup holders, pull the rear armrest strap to restricting head movement in the event of a rear impact.
Page 34 GETTING TO KNOW YOUR VEHICLE Front Head Restraint Adjustment Head Restraint Removal WARNING! Your vehicle is equipped with front two-way driver and To remove the front or rear outboard head restraints,  Head restraints should never be adjusted while the passenger head restraints.
Page 35: Uconnect Voice Recognition Quick
Voice Command. And Send Or Receive A Text the Wake Up word “Hey, Dodge” or “Hey, Uconnect”.  You can interrupt the help message or system prompts 1 — For Vehicles Not Equipped With Navigation: Push The...
Page 36: Mirrors
GETTING TO KNOW YOUR VEHICLE MIRRORS Automatic Dimming Mirror — If Equipped LLUMINATED ANITY IRRORS This mirror automatically adjusts for headlight glare from To access an illuminated vanity mirror, flip down one of the NSIDE EARVIEW IRROR vehicles behind you. visors and lift the mirror cover.
Page 37: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE NOTE: UTSIDE IRRORS OWER DJUSTMENT IRRORS  To adjust the power mirrors, the ignition must be in the The outside mirror(s) can be adjusted to the center of the The power mirror control switch is located on the driver's ON/RUN position.
Page 38: Folding Mirrors
GETTING TO KNOW YOUR VEHICLE — I  The HomeLink® buttons that are located in the over- OLDING IRRORS EATED IRRORS QUIPPED head console or sun visor designate the three different The exterior mirrors are hinged to allow the mirror to pivot These mirrors are heated to melt frost or ice.
Page 39: Erasing All The Home Link Channels
GETTING TO KNOW YOUR VEHICLE ® NOTE: Continue to hold both buttons and observe the RASING HomeLink® indicator light. The HomeLink® indicator The “LEARN” or “TRAIN” button is not the button you HANNELS light will flash slowly and then rapidly. Once this normally use to operate the device.
Page 40: Programming Homelink® To A Miscellaneous Device
GETTING TO KNOW YOUR VEHICLE ® T Non-Rolling Code Garage Door Opener Final Steps Push and hold the desired HomeLink® button until ROGRAMMING the HomeLink® indicator light begins to flash after Push and hold the programmed HomeLink® button ISCELLANEOUS EVICE 20 seconds.
Page 41: Security
GETTING TO KNOW YOUR VEHICLE Place the hand-held transmitter 1 to 3 inches Reprogramming A Single HomeLink® Button (Canadian/ ROUBLESHOOTING (3 to 8 cm) away from the HomeLink® button you Gate Operator) wish to program while keeping the HomeLink® If you are having trouble programming HomeLink®, here To reprogram a channel that has been previously trained, indicator light in view.
Page 42: Exterior Lights
GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS From the O (off) position, rotate the headlight switch clockwise to the first detent for automatic headlights, the second detent for parking lights and instrument panel ULTIFUNCTION EVER lights operation, or to the third detent for headlights, parking lights, and instrument panel lights operation.
Page 43: Automatic High Beam Headlamp Control - If Equipped
GETTING TO KNOW YOUR VEHICLE — I UTOMATIC EADLAMP UTOMATIC EADLIGHTS QUIPPED EADLIGHT ELAY — I ONTROL QUIPPED This system automatically turns the headlights To aid in your exit, your vehicle is equipped with a on or off according to ambient light levels. To headlight delay that will leave the headlights on for The Automatic High Beam Headlamp Control system turn the system on, rotate the headlight switch...
Page 44: Turn Signals
GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS IGNALS Move the multifunction lever up or down to activate the NTERIOR OURTESY IGHTS turn signals. The arrows on each side of the instrument cluster display flash to show proper operation. Courtesy and dome lights are turned on when the front Once the turn signal lever is activated, it will return to its doors are opened.
Page 45 GETTING TO KNOW YOUR VEHICLE Overhead Light Timing Timing While Getting Out Of The Vehicle NOTE: The light will turn off automatically after a few minutes if a On certain models, to assist getting in and out of the After placing the ignition in the OFF position, the overhead door is left open.
Page 46: Windshield Wipers And Washers
GETTING TO KNOW YOUR VEHICLE Interior Ambient Lighting — If Equipped INDSHIELD IPER PERATION Rotating the switch to the Low Continuous Wiper Speed position The brightness of the interior passenger compartment activates the first (low) level continuous lights can be adjusted through Uconnect Settings speed of the windshield wipers in page 130.
Page 47: Rain Sensing Wipers - If Equipped
GETTING TO KNOW YOUR VEHICLE Windshield Washer Activation CAUTION! To use the washer, pull the windshield wiper lever toward Rotate the wiper switch to the Low Sensitivity Rain Always remove any buildup of snow that prevents the the steering wheel and hold. Sensing position or High Sensitivity Rain Sensing windshield wiper blades from returning to the parked position.
Page 48: Rear Window Wiper/Washer
GETTING TO KNOW YOUR VEHICLE MAX A/C Button The rain sensor is able to recognize and automatically UTOMATIC LIMATE ONTROL adjust itself when the following conditions occur: ESCRIPTIONS UNCTIONS Press and release the MAX A/C button on the  Presence of dirt on the controlled surface touchscreen to change the current setting to (e.g.
Page 49 GETTING TO KNOW YOUR VEHICLE Recirculation Button MAX Defrost Button Rear Defrost Button Press and release this button on the Press and release the touchscreen button, or Press and release the button on the touchscreen, or push the button on the push and release the button on the faceplate, touchscreen, or push and release the button on faceplate, to change the system between...
Page 50 GETTING TO KNOW YOUR VEHICLE Driver And Passenger Temperature Blower Control Bi-Level Mode Control Buttons Blower Control is used to regulate the amount of Air comes from the instrument panel outlets air forced through the Climate Control system. and floor outlets. A slight amount of air is These buttons provide the driver and passenger with There are seven blower speeds available.
Page 51: Automatic Temperature
GETTING TO KNOW YOUR VEHICLE Combine Modes Manual Operation Override UTOMATIC EMPERATURE (ATC) Dual Level Combination This system offers a full complement of manual override ONTROL features. The AUTO symbol in the front ATC display will be Front Defrost and Panel Mode Automatic Operation turned off when the system is being used in the manual Tri-Level Combination...
Page 52: Interior Storage And Equipment
GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Winter Operation Operating Tips Chart To ensure the best possible heater and defroster WEATHER CONTROL SETTINGS TORAGE performance, make sure the engine cooling system is functioning properly and the proper amount, type, and Set the mode control to Glove Compartment concentration of coolant is used.
Page 53: Usb Control
GETTING TO KNOW YOUR VEHICLE Console Storage Compartment Door Storage Different scenarios are listed here when a non-phone device is plugged into the smaller and larger USB ports, To open, pull up on the latch and lift the cover. Front Door Storage and when a phone device is plugged into the smaller and Storage areas are located in the door trim panels.
Page 54: Power Outlets - If Equipped
GETTING TO KNOW YOUR VEHICLE By using a USB cable to connect an external device: Both the front and rear USB C port have the ability for fast NOTE: charging. They are Power Delivery 3.0 and can provide  The device can be played on the vehicle’s sound ...
Page 55: Wireless Charging Pad
GETTING TO KNOW YOUR VEHICLE — Your vehicle may also be equipped with a power outlet on IRELESS HARGING CAUTION! the back of the center console. QUIPPED  Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse.
Page 56 GETTING TO KNOW YOUR VEHICLE The wireless charging pad is equipped with an anti-slip Important Notes Regarding This Vehicle’s Wireless  Having multiple applications open on the phone while mat to hold your mobile phone in place, and an LED Charging Pad: charging will reduce the charging efficiency, and may indicator light.
Page 57: Windows
GETTING TO KNOW YOUR VEHICLE WINDOWS NOTE: To stop the window from going all the way down during the Auto-Down operation, pull up or push the switch briefly.  The power window switches will remain active for up to Anti-Pinch Protect OWER INDOW ONTROLS...
Page 58: Window Lockout Switch
GETTING TO KNOW YOUR VEHICLE and can be minimized. If the buffeting occurs with the rear NOTE: INDOW OCKOUT WITCH windows open, open the front and rear windows together  Operation of the sunroof is only possible with the The window lockout switch on the driver's door trim panel to minimize the buffeting.
Page 59: Opening And Closing The Sunroof
GETTING TO KNOW YOUR VEHICLE NOTE: Express Open/Close PENING LOSING UNROOF If the sunshade is in the closed position when Express or Push the sunshade switch rearward and release it within The sunroof has two programmed automatic stops for the Manual Open operation is initiated the sunshade will auto- one-half second, the sunshade will open automatically.
Page 60: Re-Initialization Procedure
GETTING TO KNOW YOUR VEHICLE Move to the outside of the vehicle. The safety latch NITIALIZATION ROCEDURE UNROOF AINTENANCE release lever is located behind the front edge of the Automatic operation of the sunroof must be re-initialized Use only a non-abrasive cleaner and a soft cloth to clean hood at the center.
Page 61: Closing The Hood
GETTING TO KNOW YOUR VEHICLE LIFTGATE The key fob will release the liftgate when the liftgate is LOSING unlocked or locked. The electronic release button requires To close the hood, pull downward in a continuous motion the liftgate to be unlocked. NLOCK IFTGATE until the crossover point, where the gas props no longer...
Page 62: Lock/Close The Liftgate
GETTING TO KNOW YOUR VEHICLE — I To Lock The Liftgate LOSE IFTGATE OWER IFTGATE QUIPPED With a valid Passive Entry key fob within 5 ft (1.5 m) of the There are several different ways to close the liftgate: The power liftgate may be opened by pushing liftgate, pushing the Passive Entry button located to the the liftgate button on the key fob.
Page 63: Adjustable Power Liftgate Height
GETTING TO KNOW YOUR VEHICLE NOTE:  If the electronic liftgate release handle is pushed a DJUSTABLE OWER IFTGATE EIGHT second time while the power liftgate is opening, the  Before closing the liftgate, make sure to be in posses- liftgate motor will disengage to allow manual operation.
Page 64: Hands-Free Liftgate - If Equipped
GETTING TO KNOW YOUR VEHICLE — I If it is closed, the Hands-Free Liftgate unlocks and opens  The Hands-Free Liftgate feature can be activated by ANDS IFTGATE QUIPPED completely, and with another movement of the foot, it any metallic object making a similar in-and-out motion stops.
Page 65: Cargo Area Features
GETTING TO KNOW YOUR VEHICLE NOTE: Clear the pins placed outside of the shelf, and then WARNING! remove the rear shelf pulling it upwards and out Allow the power system to open the liftgate. Manually through the rear doors. pushing or pulling the liftgate may activate the liftgate ...
Page 66 GETTING TO KNOW YOUR VEHICLE Cargo Tie-Down Hooks And Loops WARNING! WARNING! The tie-downs located on the cargo area floor should be  Cargo tie-downs are not safe anchors for a child seat The weight and position of cargo and passengers can used to secure loads safely when the vehicle is moving.
Page 67: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...
Page 68: Instrument Cluster Descriptions B
GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Temperature Gauge NSTRUMENT LUSTER ESCRIPTIONS NSTRUMENT LUSTER ISPLAY  The temperature gauge shows engine oil tempera- OCATION ONTROLS Use this QR code to access your digital ture. Any reading within the normal range indi- experience.
Page 69 GETTING TO KNOW YOUR INSTRUMENT PANEL The systems allow the driver to select information by Main Screen Configuration — If Equipped The instrument cluster display is located in the center pushing the following buttons mounted on the steering portion of the cluster and consist of multiple sections: To customize the instrument cluster further, you are able wheel: to select up to five tiles to display information based on...
Page 70: Oil Change Reset
GETTING TO KNOW YOUR INSTRUMENT PANEL  Unstored Messages  Unless reset, this message will continue to display gear shift point has been reached. This indication notifies each time the ignition is cycled to the ON/RUN position. the driver that changing gear will allow a reduction in fuel This message type is displayed indefinitely or until the consumption.
Page 71 GETTING TO KNOW YOUR INSTRUMENT PANEL SPEEDOMETER PERFORMANCE Press and hold the Thumbwheel to disable the indications in the right-hand ring for the current navigation. If a The Speedometer menu options may consist of the Performance page content automatically changes predicted route is selected, the route shall start without following: according to the selected drive mode.
Page 72: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL DRIVER ASSIST The electrical loads that may be switched off (if equipped), ATTERY AVER ATTERY AVER and vehicle functions which can be effected by load — E The instrument cluster display displays the current ESSAGE LECTRICAL reduction:...
Page 73: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES  The battery was recently replaced and was not charged If the light remains on when the parking brake has been completely. disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake The warning/indicator lights will illuminate in the ...
Page 74 GETTING TO KNOW YOUR INSTRUMENT PANEL Door Open Warning Light Electronic Throttle Control (ETC) Warning Vehicles equipped with the Anti-Lock Brake System (ABS) are also equipped with Electronic Brake Force Distribution Light This indicator will illuminate when a door is (EBD).
Page 75: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Engine Coolant Temperature Warning Hood Open Warning Light Seat Belt Reminder Warning Light Light This warning light will illuminate when the This warning light indicates when the driver or hood is left open and not fully closed. passenger seat belt is unbuckled.
Page 76 GETTING TO KNOW YOUR INSTRUMENT PANEL Fuel Level Sensor Failure Warning Light Drowsy Driver Detected System Fault  The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop Warning Light — If Equipped This light illuminates when there is a fuel level when ESC becomes inactive.
Page 77 GETTING TO KNOW YOUR INSTRUMENT PANEL Lane Keep Assist Warning Light — Keyless Enter n’ Go™/Service Passive Certain conditions, such as a loose or missing gas cap, poor quality fuel, etc., may illuminate the light after engine If Equipped Entry Warning Light start.
Page 78 GETTING TO KNOW YOUR INSTRUMENT PANEL Towing Hook Breakdown Warning Light — Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not If Equipped operating properly. The TPMS malfunction indicator is Do not continue driving with one or more flat tires as This light illuminates when there is a failure combined with the low tire pressure telltale.
Page 79: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Immobilizer Fail / VPS Electrical Alarm Automatic Low Beam Indicator Light — CAUTION! Warning Light If Equipped Continuous driving with the Transmission Temperature This telltale will illuminate when the vehicle This indicator appears when the automatic low Warning Light illuminated will eventually cause severe security system has detected an attempt to beam headlights are on...
Page 80: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II HITE NDICATOR IGHTS NDICATOR IGHTS Automatic High Beam Indicator Light — High Beam Indicator Light Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the If Equipped This indicator light will illuminate to indicate performance of the emissions, engine, and automatic...
Page 81: Onboard Diagnostic System (Obd Ii)
GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND (OBD II) As soon as you cycle the ignition switch to the NBOARD IAGNOSTIC YSTEM ON position, you will see the Malfunction Indicator YBERSECURITY MAINTENANCE PROGRAMS Light (MIL) symbol come on as part of a normal bulb check.
Page 82: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE Start the engine with the gear selector in the NEUTRAL or CAUTION! PARK position. Apply the brake before shifting to any driving range. Before starting your vehicle, adjust your seat, adjust both Damage to the transmission may occur if the following inside and outside mirrors, and fasten your seat belts.
Page 83: Cold Weather Operation (Below -22°F Or −30°C)
STARTING AND OPERATING Keyless Enter ’n Go™ — With Driver’s Foot Off The Brake If the engine fails to start within 10 seconds, place CAUTION! Pedal (In PARK Or NEUTRAL Position) the ignition in the OFF position, wait 10 to 15 seconds to allow the starter to cool, then repeat the “Extended To prevent damage to the starter, do not continuously The Keyless Enter ’n Go™...
Page 84: Stopping The Engine
STARTING AND OPERATING While cruising, brief full-throttle acceleration within the You can engage the parking brake in two ways: TOPPING NGINE limits of local traffic laws contributes to a good break-in.  Manually, by applying the EPB switch. Vehicles Equipped With Electronic Key Wide-open throttle acceleration in low gear can be ...
Page 85 STARTING AND OPERATING NOTE: to move the gear selector out of PARK. The parking brake WARNING! should always be applied whenever the driver is not in the The EPB Warning Light will illuminate if the EPB switch is vehicle. held for longer than 60 seconds in either the released or ...
Page 86 STARTING AND OPERATING Brake Service Mode For automatic transmissions, the EPB will automatically WARNING! engage if all of the following conditions are met: We recommend having your brakes serviced by an Driving the vehicle with the parking brake engaged, or ...
Page 87: Automatic Transmission
STARTING AND OPERATING When Brake Service Mode work is complete, the following WARNING! WARNING! steps must be followed to reset the parking brake system to normal operation:  Your vehicle could move and injure you and others if  Never leave children alone in a vehicle, or with ...
Page 88: Ignition Park Interlock
STARTING AND OPERATING NOTE: GNITION NTERLOCK  The transmission electronics are self-calibrating; This vehicle is equipped with an Ignition Park Interlock therefore, the first few shifts on a new vehicle may be which requires the transmission to be in PARK (P) before somewhat abrupt.
Page 89 STARTING AND OPERATING REVERSE (R) When exiting the vehicle, always: If the transmission temperature exceeds normal operating limits, the transmission controller may modify the Apply the parking brake. This range is for moving the vehicle backward. Shift into transmission shift schedule, reduce engine torque, and/or REVERSE only after the vehicle has come to a complete Shift the transmission into PARK.
Page 90: All-Wheel Drive (Awd)
STARTING AND OPERATING SPORT MODE — IF EQUIPPED In the event of a momentary problem, the transmission NOTE: can be reset to regain all forward gears by performing the The torque converter clutch will not engage until the following steps: engine and/or transmission is warm (usually after 1 to Your vehicle is equipped with a SPORT Mode feature.
Page 91: Stop/Start System - If Equipped
STARTING AND OPERATING If the “POWER STEERING SYSTEM HOT -  Battery charge is low. UTOSTOP PERFORMANCE MAY BE LIMITED” message  The vehicle is on a steep grade. and a steering wheel icon display on the The Stop/Start feature is enabled after every normal ...
Page 92: To Start The Engine While In Autostop Mode
STARTING AND OPERATING TART NGINE HILE ANUALLY YSTEM ALFUNCTION UTOSTOP TART YSTEM If there is a malfunction in the Stop/Start system, the system will not shut down the engine. A “SERVICE STOP/ While in a forward gear, the engine will start when the START SYSTEM”...
Page 93: Activation
STARTING AND OPERATING NOTE: If the switch is held upward or downward, the set speed EACTIVATION will continue to adjust until the switch is released.  The Mode button also activates the Adaptive Cruise To turn off Active Speed Limiter, push the Mode button NOTE: Control (ACC) system.
Page 94: Activation
STARTING AND OPERATING Automatic Mode CTIVATION EACTIVATION When Automatic Mode is selected, the ISA system will To activate the feature, make sure the Traffic Sign The ISA system will deactivate in the following situations: automatically adjust the maximum vehicle speed when Recognition (TSR), and Intelligent Speed Assist (ISA) systems the TSR system detects a new speed limit sign.
Page 95 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation ACC will allow you to keep Cruise Control engaged in light WARNING! to moderate traffic conditions without the constant need The buttons on the left side of the steering wheel operate to reset your speed. ACC utilizes a radar sensor and a ...
Page 96 STARTING AND OPERATING To Set A Desired Speed Adaptive Cruise Control Off  When the vehicle speed is below the minimum speed range When ACC is deactivated, all ACC visualizations will not be When the vehicle has reached the desired speed, push shown in the instrument cluster display.
Page 97 STARTING AND OPERATING To Cancel Resume can be used at any speed above 0 mph (0 km/h)  If the switch is held upward or downward, the set speed when ACC is active. will continue to adjust until the switch is released. The following conditions cancel ACC: NOTE: Metric Speed (km/h)
Page 98 STARTING AND OPERATING TO ACCELERATE FOR PASSING  The distance setting is changed.  The system disengages page 94. Ú While the Cruise Control is set, press the accelerator to pass as you would normally. When the pedal is released, The maximum braking applied by ACC is limited;...
Page 99 STARTING AND OPERATING Display Warnings And Maintenance OFFSET DRIVING TURNS AND BENDS ACC may not detect a vehicle in the same lane that is When driving on a curve with ACC engaged, the system LIMITED OPERATION WARNING offset from your direct line of travel, or a vehicle merging may increase or decrease the vehicle speed for stability, in from a side lane.
Page 100 STARTING AND OPERATING LANE CHANGING NARROW VEHICLES STATIONARY OBJECTS AND VEHICLES ACC may not detect a vehicle until it is completely in the Some narrow vehicles traveling near the outer edges of ACC does not react to stationary objects or vehicles. For lane in which you are traveling.
Page 101: Traffic Sign Recognition - If Equipped
STARTING AND OPERATING TRAFFIC SIGN RECOGNITION — Visual + Chime CTIVATION EACTIVATION When Visual + Chime is selected, the system will alert the IF EQUIPPED The TSR System can be enabled/disabled within the driver when the current speed of the vehicle exceeds the Uconnect system page 130.
Page 102: Indications On The Display
STARTING AND OPERATING Supplemental Information NDICATIONS ISPLAY CAUTION! Supplemental information may be displayed, along with a Detected traffic signs are shown in the instrument cluster newly detected speed limit, indicating special  The area surrounding the sensor must not be display, and can display a combination of signs at one covered with stickers or any other object.
Page 103: Active Driving Assist System
STARTING AND OPERATING Setting The ACC Speed Using Confirmation Mode For ACC system operating instructions and system WARNING! limitations, see page 92. Ú When Confirmation Mode is selected, and the Traffic Sign The Active Driving Assist (ADA) system is a convenience Recognition (TSR) system detects a new speed limit sign, NOTE: system.
Page 104: Turning Active Driving Assist On Or Off
STARTING AND OPERATING If the Active Speed Limiter was active before pushing  Vehicle is centered in lane URNING CTIVE RIVING SSIST the ADA on/off button, it will then disable and  Turn signal is not activated activate ACC. Push the SET switch upward or ...
Page 105: Indications On The Display
STARTING AND OPERATING System Deactivation  If the camera has decreased visibility due to rain, Active Driving Assist Indicators Are Off snow, etc. The system will be deactivated in any of the following  ADA is not turned on/enabled by the driver. situations: ...
Page 106: Minimum Risk Maneuver
STARTING AND OPERATING The Active Driving Assist system DOES NOT: INIMUM ANEUVER YSTEM TATUS  Warn or prevent collisions with other vehicles When the vehicle begins the hands-off steering wheel Along with changes in the system’s indicator lights (green,  Steer your vehicle around stopped vehicles, slower warning escalation, previously described, the system will yellow, and red), the system can also issue several vehicles, construction equipment, pedestrians, or...
Page 107: Parksense Front/Rear Park Assist System
STARTING AND OPERATING PARKSENSE FRONT/REAR PARK ASSIST relative to the vehicle. The color of the arc depends on the ENSE ENSORS distance and position of the obstacle inside or outside the SYSTEM — IF EQUIPPED The six ParkSense sensors (four when vehicle is not trajectory.
Page 108: Enabling And Disabling Parksense
STARTING AND OPERATING  Use the ParkSense switch to turn the ParkSense NABLING ISABLING ENSE LEANING ENSE YSTEM system off if objects such as bicycle carriers, etc. are ParkSense can be enabled and disabled with Clean the ParkSense sensors with water, car wash soap attached to the rear fascia/bumper.
Page 109: Side Distance Warning (Sdw) System
STARTING AND OPERATING (SDW) Activation/Deactivation ISTANCE ARNING WARNING! The system can operate only after driving a short distance YSTEM  Before using ParkSense, it is strongly recommended and if the vehicle speed is between 0 and 8 mph (0 and that the ball mount and hitch ball assembly be The Side Distance Warning system has the function of 13 km/h) while in DRIVE or NEUTRAL, or 7 mph (11 km/h)
Page 110: Parksense Active Park Assist System - If Equipped
STARTING AND OPERATING Side Distance Warning Usage Precautions WARNING! CAUTION! Some conditions may influence the performance of the  Drivers must be careful when backing up even when  The vehicle must be driven slowly when using Side Distance Warning system: using ParkSense.
Page 111: Enabling And Disabling The Parksense Active Park Assist System
STARTING AND OPERATING  During a semi-automatic maneuver, if the driver To enable the ParkSense Active Park Assist system, push The ParkSense Active Park Assist system will only operate touches the steering wheel after being instructed to the ParkSense Active Park Assist switch once (LED turns and search for a parking space when the following remove their hands from the steering wheel, the on).
Page 112: Parallel/Perpendicular Parking Space Assistance Operation
STARTING AND OPERATING NOTE:  While the vehicle is in DRIVE, there will be a full screen ARALLEL ERPENDICULAR ARKING image in the Uconnect display. If the driver shifts to  When searching for a parking space, use the turn PACE SSISTANCE PERATION...
Page 113 STARTING AND OPERATING Once the vehicle is in position, you will be instructed to The system may then instruct the driver to wait for steering  If the system is canceled during the maneuver for any stop the vehicle’s movement and remove your hands from to complete before then instructing to check the vehicle’s reason, the driver must take control of the vehicle.
Page 114: Exiting The Parking Space
STARTING AND OPERATING Selection Of The Maneuver Side CAUTION! Use the turn signal to choose the direction that you want  The ParkSense Active Park Assist system is only a to perform the maneuver. Use the right arrow indicator to parking aid and it is unable to recognize every perform the maneuver to the right side and use the left obstacle, including small obstacles.
Page 115: Lanesense - If Equipped
STARTING AND OPERATING  Construction equipment, large trucks, and other vibra-  Some maneuvers at very tight bends might be impos- When both lane markings are detected and the driver tions could affect the performance of ParkSense. sible to be carried out. unintentionally drifts out of the lane (no turn signal applied), the LaneSense system provides a haptic warning ...
Page 116: Turning Lanesense On Or Off
STARTING AND OPERATING Left Lane Departure — Only Left Lane Detected URNING ENSE ENSE ARNING ESSAGE  When the LaneSense system is on, the left lane line will The LaneSense on/off button is located on the on the end The LaneSense system will indicate the current lane drift change from gray to white, and the LaneSense telltale of the multifunction lever, to the left of the steering wheel.
Page 117 STARTING AND OPERATING Left Lane Departure — Both Lanes Detected  When the LaneSense system senses a lane drift situa-  When the LaneSense system senses the lane has been tion, the left lane line turns from white to yellow. The approached and is in a lane departure situation, the ...
Page 118: Changing Lanesense Status
STARTING AND OPERATING When the vehicle is shifted out of REVERSE with camera When enabled, active guidelines are overlaid on the image HANGING ENSE TATUS delay turned off, the rear camera mode is exited and the to illustrate the width of the vehicle and its projected back The LaneSense system has settings to adjust the intensity previous screen appears.
Page 119: Surround View Camera System
STARTING AND OPERATING The Surround View Camera system is comprised of four When the vehicle is shifted out of REVERSE with camera CAUTION! sequential cameras located in the front grille, rear liftgate delay turned on, the camera image will continue to be and side mirrors.
Page 120 STARTING AND OPERATING Modes Of Operation Rear View Plus Top View Deactivation Manual activation of the Surround View Camera is This is the default view of the system in The system can be deactivated under the following selected by pressing the Surround View Camera button REVERSE and is always paired with the conditions: located in the Controls menu within the Uconnect system.
Page 121: Refueling The Vehicle
STARTING AND OPERATING NOTE: NOTE: CAUTION! There is no fuel filler cap. Two flapper doors inside the pipe In certain cold conditions, ice may prevent the fuel door seal the system. from opening. If this occurs, lightly push on the fuel door ...
Page 122: Vehicle Loading
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) Emergency Fuel Door Release Access the rear quarter trim panel in the cargo area The GVWR is the total permissible weight of your vehicle on the right side of the vehicle. including driver, passengers, vehicle, options and cargo. The label also specifies maximum capacities of front and rear Gross Axle Weight Rating (GAWR).
Page 123: Trailer Towing
STARTING AND OPERATING Inflation Pressure Gross Trailer Weight (GTW) WARNING! This is the cold tire inflation pressure for your vehicle for The GTW is the weight of the trailer plus the weight of all Do not load your vehicle any heavier than the GVWR or all loading conditions up to full GAWR.
Page 124: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING Trailer Sway Control (TSC) Weight-Distributing Hitch WARNING! The TSC can be a mechanical telescoping link that can be A Weight-Distributing system works by applying leverage  An improperly adjusted Weight-Distributing Hitch installed between the hitch receiver and the trailer tongue through spring (load) bars.
Page 125: Trailer And Tongue Weight
STARTING AND OPERATING RAILER ONGUE EIGHT OWING EQUIREMENTS WARNING! Never exceed the maximum tongue weight stamped on To promote proper break-in of your new vehicle drivetrain  When hauling cargo or towing a trailer, do not over- your trailer hitch. components, the following guidelines are recommended.
Page 126 STARTING AND OPERATING Towing Requirements — Tires Towing Requirements — Trailer Lights And  Trailer brakes are recommended for trailers over 1,000 lb (453 kg) and required for trailers in excess of Wiring  Do not attempt to tow a trailer while using a compact 1,543 lb (700 kg).
Page 127: Towing Tips
STARTING AND OPERATING OWING Before towing, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Automatic Transmission Select the DRIVE (D) range when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 128: Recreational Towing (Behind Motorhome)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheels Off The Ground All-Wheel Drive (AWD) Flat Tow NONE NOT ALLOWED REAR NOT ALLOWED Dolly Tow FRONT NOT ALLOWED On Trailer NOTE:  When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details. ...
Page 129: Recreational Towing
STARTING AND OPERATING DRIVING TIPS Traction ECREATIONAL OWING When driving on wet or slushy roads, it is possible for a Recreational towing (with all four wheels on the ground, or RIVING LIPPERY URFACES wedge of water to build up between the tire and road using a towing dolly) is NOT ALLOWED.
Page 130: Driving Through Water
STARTING AND OPERATING RIVING HROUGH ATER WARNING! CAUTION! Driving through water more than a few inches/ Do not drive on or across a road or path where water is  Do not exceed 5 mph (8 km/h) when driving through centimeters deep will require extra caution to ensure flowing and/or rising (as in storm run-off).
Page 131: Multimedia
MULTIMEDIA UCONNECT SYSTEMS Your vehicle may be equipped with certain security WARNING! features to reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. For detailed information about your Uconnect 5/5 NAV  ONLY insert trusted media devices/components into Vehicle software technology continues to evolve over time With 10.25-inch Display system, refer to your Uconnect your vehicle.
Page 132: Uconnect Settings
MULTIMEDIA UCONNECT SETTINGS For the Uconnect 5/5 NAV With 10.25-inch Display USTOMER ROGRAMMABLE EATURES Press the Vehicle button, then press the Settings tab on The Uconnect system uses a combination of buttons on the top of the touchscreen. In this menu, the Uconnect the touchscreen and buttons on the faceplate located system allows you to access all of the available next to the shifter.
Page 133 MULTIMEDIA Display When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the touchscreen. The available settings are: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument Cluster...
Page 134 MULTIMEDIA Setting Name Description Navigation Turn-by-Turn Displayed in Cluster This setting will display Navigation prompts in the Instrument Cluster Display. This setting will display smartphone notifications and messages in the Instrument Cluster Phone Pop-ups Displayed In Cluster Display. My Profile When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.
Page 135 This setting will allow you to change the voice options for the radio to “Male” or “Female”. This setting will allow you to set the system “Wake Up” word. The available options are Wake Up Word “Off”, “Hey, Uconnect”, and “Hey, Dodge”. Voice Barge-in This setting will allow Voice Barge-in to be turned on or off.
Page 136 MULTIMEDIA Setting Name Description This setting will allow you to have pop-up notifications for new text messages. New Text Message Pop-ups Setting options are “On” and “Off”. This setting will allow you to have pop-up notifications for missed calls. Setting options Missed Calls Message are “On”...
Page 137 MULTIMEDIA Safety/Driving Assistance When the Safety/Driving Assistance button is pressed on the touchscreen, the system displays the options related to the vehicle’s safety settings. These options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder; the available options related to that feature will then display on the screen.
Page 138 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in the vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The “Lights” setting will Blind Spot Alert activate the Blind Spot Alert lights on the outside mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime.
Page 139 MULTIMEDIA Clock & Date When the Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will sync the time to the GPS receiver in the system.
Page 140 MULTIMEDIA Phone/Bluetooth® When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 141 This setting will allow you to set the system’s “Wake Up” word. The available options are Wake Up Word “Off”, “Hey, Uconnect”, and “Hey, Dodge”. This setting allows you to respond to a Voice Response before the statement is Voice Barge-In completed by the system.
Page 142 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will add a delay to the ParkView Backup Camera when shifting out of ParkView Backup Camera Delay REVERSE.
Page 143 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE:  When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchase. ...
Page 144 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing.
Page 145 MULTIMEDIA Setting Name Description This setting will change how many pushes of the Unlock button on the key fob are needed to unlock all the doors. The “Driver Door” setting will only unlock the driver door on the Remote Door Unlock/1st Press Of Key Fob Unlocks first push on the Unlock button.
Page 146 MULTIMEDIA Key Off Options When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is set to OFF. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will keep the radio running after the engine is turned off.
Page 147 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 148 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting controls the Notification chime that plays when a new notification is sent. Notification Sounds The options are “On”...
Page 149 MULTIMEDIA ® SiriusXM Setup ® ® When the SiriusXM Setup button is pressed on the touchscreen, the system displays the options related to SiriusXM satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning. NOTE: ®...
Page 150 MULTIMEDIA Software Updates When the Software Updates button is pressed on the touchscreen, the system will display the setting related to updating the Uconnect software. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will allow software updates to happen over Wi-Fi. Selectable options for the Software Downloads over Wi-Fi setting are “On”...
Page 151 MULTIMEDIA Reset When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. NOTE: ...
Page 152: Steering Wheel Audio Controls - If Equipped
MULTIMEDIA Setting Name Description This setting will display a pop-up that gives you the option to clear all personal data from the system, including Bluetooth® devices and presets. Clear Personal Data NOTE: Performing this function may take several minutes to complete. Reset Performance Values This setting will reset the performance values from your vehicle.
Page 153: Controls On Central Tunnel
MULTIMEDIA MY CAR Drive Mode Explorer ONTROLS ON ENTRAL UNNEL This page will show content related to the additional drive A rotary control is present on the central tunnel to the right My Car is an application that provides indicators that will mode features.
Page 154: Performance Pages
MULTIMEDIA PERFORMANCE PAGES The following describes each feature and its operation: ONSUMPTION ISTORY ECHNICAL AUGES Selecting “Consumption History” will relay information The Performance Pages is an application that provides regarding the fuel consumption of the vehicle. This performance indicators that will help you gain familiarity Selecting “Technical Gauges”...
Page 155: Accessory Gauges
MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The internal wireless radio operates within guidelines CCESSORY AUGES found in radio frequency safety standards and Selecting “Accessory Gauges” will relay the following recommendations, which reflect the consensus of the Under certain conditions, the mobile phone being on in information: scientific community.
Page 156: Safety
SAFETY SAFETY FEATURES The ABS is designed to function with the Original WARNING! Equipment Manufacturer (OEM) tires. Modification may result in degraded ABS performance. (ABS)  The ABS cannot prevent collisions, including those RAKE YSTEM resulting from excessive speed in turns, following WARNING! another vehicle too closely, or hydroplaning.
Page 157: Electronic Brake Control (Ebc) System
SAFETY (EBC) to reach/maintain vehicle stability. The only notification LECTRONIC RAKE ONTROL WARNING! the driver receives that the feature is active is the torque YSTEM applied to the steering wheel. The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor NOTE: Your vehicle is equipped with an advanced Electronic can it increase the traction afforded by prevailing road...
Page 158 SAFETY The ESC Activation/Malfunction Indicator Light located in WARNING! WARNING! the instrument cluster will start to flash as soon as the ESC system becomes active. The ESC Activation/Malfunction Many factors, such as vehicle loading, road conditions  Vehicle modifications, or failure to properly maintain Indicator Light also flashes when the TCS is active.
Page 159 SAFETY ESC Activation/Malfunction Indicator Light Full Off NOTE: And ESC OFF Indicator Light To enter the “Full Off” mode, push the Sport Mode button  The ESC Activation/Malfunction Indicator Light and the and then hold the ESC OFF button for two seconds while ESC OFF Indicator Light come on momentarily each The ESC Activation/Malfunction Indicator Light the vehicle is stopped with the engine running.
Page 160 SAFETY Hill Start Assist (HSA) Ready Alert Braking (RAB) WARNING! HSA is designed to mitigate roll back from a complete stop RAB may reduce the time required to reach full braking There may be situations where the Hill Start Assist while on an incline.
Page 161: Auxiliary Driving Systems
SAFETY AUXILIARY DRIVING SYSTEMS The BSM detection zone covers approximately one lane The BSM system can become blocked if snow, ice, mud, or width, 12 ft (3.8 m), on both sides of the vehicle. other road contaminations accumulate on the rear fascia/ The zone length starts at the outside mirror and extends bumper where the radar sensors are located.
Page 162 SAFETY The BSM system will provide a visual alert in the The BSM system monitors the detection zone from three Entering From The Rear appropriate side view mirror based on a detected object different entry points (side, rear, front) while driving to see Vehicles that come up from behind your vehicle on either when enabled.
Page 163 SAFETY Rear Cross Path (RCP) Overtaking Traffic The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, If you pass another vehicle slowly with a relative speed RCP is intended to aid the driver when backing out of berms, etc.
Page 164: Forward Collision Warning (Fcw) With Mitigation - If Equipped
SAFETY NOTE: Blind Spot Alert Lights/Chime sensors of the blockage. After removing the blockage, reset the system by cycling the ignition from ON to OFF and In a parking lot situation, oncoming vehicles can be When operating in Blind Spot Alert Lights/Chime mode, then back ON.
Page 165 SAFETY FCW Settings If a Forward Collision Warning with Mitigation event begins  It is unsafe to test the FCW system. To prevent such at a speed below 39 mph (62 km/h), the system may misuse of the system, after four Active Braking events The Forward Collision menu setting is located in the provide the maximum braking possible to mitigate the within a key cycle, the Active Braking portion of FCW will...
Page 166 SAFETY By changing the FCW status setting to "Far", the system  FCW may not react to irrelevant objects such as over- provides possible collision warnings on objects farther head objects, ground reflections, objects not in the away. This results in earlier warnings and provides the path of the vehicle, stationary objects that are far away, most reaction time to avoid possible collisions.
Page 167: Tire Pressure Monitoring System (Tpms)
SAFETY Turning PEB On Or Off NOTE: RESSURE ONITORING YSTEM Once the low tire pressure warning (Tire Pressure NOTE: (TPMS) Monitoring System Warning Light) illuminates, you must The default status of PEB is “On.” This allows the system increase the tire pressure to the recommended cold to warn you of a possible frontal collision with the pedes- The TPMS will warn the driver of a low tire pressure based placard pressure in order for the Tire Pressure Monitoring...
Page 168 SAFETY Tire Pressure Monitoring System Low  Driving on a significantly underinflated tire causes the CAUTION! tire to overheat and can lead to tire failure. Underinfla- Pressure Warnings tion also reduces fuel efficiency and tire tread life, and  The TPMS has been optimized for the original equip- The Tire Pressure Monitoring System Warning may affect the vehicle’s handling and stopping ability.
Page 169 SAFETY NOTE:  Using tire chains on the vehicle Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact When filling warm tires, the tire pressure may need to be ...
Page 170: Occupant Restraint Systems
SAFETY To reactivate the TPMS, replace all four wheel and tire The driver and front passenger seats should be MPORTANT AFETY RECAUTIONS assemblies (road tires) with tires equipped with TPMS moved back as far as practical to allow the front air sensors.
Page 171: Seat Belt Systems
SAFETY Initial Indication Change Of Status YSTEMS If the driver is unbuckled when the ignition switch is first in If the driver or outboard front seat passenger (if equipped Buckle up even though you are an excellent driver, even the START or ON/RUN position, a chime will signal for a with outboard front passenger seat BeltAlert) unbuckles on short trips.
Page 172 SAFETY Lap/Shoulder Belts WARNING! WARNING! All seating positions in your vehicle are equipped with  Do not allow people to ride in any area of your vehicle  A twisted seat belt may not protect you properly. In a lap/shoulder belts. that is not equipped with seats and seat belts.
Page 173 SAFETY Position the lap belt so that it is snug and lies low WARNING! across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder  A frayed or torn seat belt could rip apart in a collision belt.
Page 174 SAFETY Lap/Shoulder Belt Untwisting Procedure WARNING! Use the following procedure to untwist a twisted lap/  Wearing your seat belt incorrectly could make your shoulder belt. injuries in a collision much worse. You might suffer Position the latch plate as close as possible to the internal injuries, or you could even slide out of the anchor point.
Page 175 SAFETY Grab the mini-latch plate and pull the seat belt over Sit back in seat. Slide the regular latch plate up the To disengage the mini-latch plate from the the seat. webbing as far as necessary to allow the seat belt to mini-buckle, insert the regular latch plate into the go around your lap.
Page 176 SAFETY Seat Belts And Pregnant Women Energy Management Feature WARNING! The front outboard seat belt system is equipped with an  ONLY use a Seat Belt Extender if it is physically Energy Management feature that may help further reduce required in order to properly fit the original seat belt the risk of injury in the event of a collision.
Page 177: Supplemental Restraint Systems (Srs)
SAFETY If the passenger seating position is equipped with an ALR How To Engage The Automatic Locking Mode UPPLEMENTAL ESTRAINT YSTEMS and is being used for normal usage, only pull the seat belt Buckle the combination lap and shoulder belt. (SRS) webbing out far enough to comfortably wrap around the Grab the shoulder portion and pull downward until...
Page 178 SAFETY Air Bag Warning Light  The Air Bag Warning Light remains on after the four to If the Redundant Air Bag Warning Light comes on eight-second interval. intermittently or remains on while driving have an The Occupant Restraint Controller (ORC) authorized dealer service the vehicle immediately ...
Page 179 SAFETY Front Air Bag Operation This vehicle may be equipped with a driver and/or front WARNING! passenger seat belt buckle switch that detects whether Front Air Bags are designed to provide additional the driver or front passenger seat belt is buckled. The seat ...
Page 180 SAFETY Occupant Classification System (OCS) — The OCS will NOT prevent deployment of the Passenger passenger seat and never install a child restraint system, Advanced Front Air Bag. The OCS may reduce the inflation including a rear-facing child restraint, in the front Front Passenger Seat rate of the Passenger Advanced Front Air Bag if the OCS passenger seat.
Page 181 SAFETY In order for the OCS to operate as designed, it is important Lighter Weight Passengers (Including Small Adults) Examples of improper front passenger seating include: for the front passenger to be seated properly and properly When a lighter weight passenger, including a small adult, ...
Page 182 SAFETY The OCS determines the front passenger’s most probable WARNING! classification. If an occupant in the front passenger seat is seated improperly, the occupant may provide an output  If a child restraint system, child, small teenager or signal to the OCS that is different from the occupant’s adult in the front passenger seat is seated improp- properly seated weight input, for example: erly, the occupant may provide an output signal to...
Page 183 SAFETY Supplemental Driver Knee Air Bag  At no time should any Supplemental Restraint System The Air Bag Warning Light in the instrument panel will (SRS) component or SRS related component or turn on whenever the OCS is unable to classify the front This vehicle is equipped with a Supplemental Driver Knee fastener be modified or replaced with any part except passenger seat status.
Page 184 SAFETY When the SAB deploys, it opens the seam on the outboard WARNING! side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the  Do not mount equipment, or stack luggage or other occupant and the door.
Page 185 SAFETY The Side Air Bags will not deploy in all side collisions, vehicle experiences a rollover or near rollover event, and WARNING! including some collisions at certain angles, or some side deployment is appropriate, the rollover sensing system will collisions that do not impact the area of the passenger deploy the side air bags and seat belt pretensioners on ...
Page 186 SAFETY If A Deployment Occurs Your vehicle may also be designed to perform any of these WARNING! other functions in response to the Enhanced Accident The front air bags are designed to deflate immediately Response System: Deployed air bags and seat belt pretensioners cannot after deployment.
Page 187 SAFETY Enhanced Accident Response System Reset Procedure After the event occurs, when the system is active, a message regarding fuel cutoff is displayed. Turn the ignition switch from ignition AVV/START or MAR/ON/RUN to ignition STOP/OFF/ LOCK. Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine compartment and fuel tank before resetting the system and starting the engine.
Page 188 SAFETY Customer Action Customer Will See NOTE: Each step MUST BE held for at least two seconds Right turn light is OFF. 8. Place turn signal in neutral state. Left turn light BLINKS. Right turn light is ON SOLID. 9. Turn left turn signal switch ON. Left turn light is ON SOLID.
Page 189 SAFETY Maintaining Your Air Bag System  How various systems in your vehicle were operating; WARNING!  Whether or not the driver and passenger safety belts WARNING!  Do not attempt to modify any part of your air bag were buckled/fastened; system.
Page 190: Child Restraints
SAFETY There are different sizes and types of restraints for NOTE: HILD ESTRAINTS children from newborn size to the child almost large  For additional information, refer to http:// Everyone in your vehicle needs to be buckled up at all enough for an adult safety belt.
Page 191 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who have Either an Infant Carrier or a Convertible Child Restraint, Infants and Toddlers not reached the height or weight limits of their child facing rearward in a rear seat of the vehicle...
Page 192 SAFETY Infant And Child Restraints Older Children And Child Restraints WARNING! Safety experts recommend that children ride rear-facing in Children who are two years old or who have outgrown their  Improper installation can lead to failure of an infant the vehicle until they are two years old or until they reach rear-facing convertible child seat can ride forward-facing or child restraint.
Page 193 SAFETY Children Too Large For Booster Seats Does the shoulder belt cross the child’s shoulder move the child closer to the center of the vehicle, or use a between the neck and arm? booster seat to position the seat belt on the child correctly. Children who are large enough to wear the shoulder belt Is the lap part of the belt as low as possible, touching comfortably, and whose legs are long enough to bend over...
Page 194 SAFETY Lower Anchors And Tethers For CHildren LATCH Positions For Installing Child Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and (LATCH) Restraint System Restraints In This Vehicle Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH-equipped child seats.
Page 195 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined What is the weight limit (child’s weight + weight of the child weight of the child and the child restraint is 65 lb restraint) for using the LATCH anchorage system to attach 65 lb (29.5 kg) (29.5 kg).
Page 196 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will The lower anchorages are round bars that are There are tether strap anchorages behind have a hook or connector to attach to the lower anchorage found at the rear of the seat cushion where it each rear seating position located on the...
Page 197 SAFETY Center Seat LATCH How To Stow An Unused Switchable-ALR Place the child seat between the lower anchorages for that seating position. If the second row seat can (ALR) Seat Belt: be reclined, you may recline the seat and/or raise the WARNING! When using the LATCH attaching system to install a child head restraint (if adjustable) to get a better fit.
Page 198 SAFETY Installing Child Restraints Using The Lap/Shoulder Belt Systems For Installing The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor Vehicle Seat Belt Child Restraints In This Vehicle (ALR) that is designed to keep the lap portion of the seat Child restraint systems are designed to be secured in belt tight around the child restraint so that it is not vehicle seats by lap belts or the lap belt portion of a...
Page 199 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the child Always use the tether anchor when using the seat belt to restraint) for using the Tether Anchor with the seat belt to Weight limit of the Child Restraint install a forward-facing child restraint, up to the attach a forward-facing child restraint?
Page 200 SAFETY Installing A Child Restraint With A Installing Child Restraints Using The Top Pull on the webbing to make the lap portion tight against the child seat. Switchable Automatic Locking Tether Anchorage: To lock the seat belt, pull down on the shoulder part Retractor (ALR): of the belt until you have pulled all the seat belt WARNING!
Page 201: Safety Tips
SAFETY Look behind the seating position where you plan to WARNING! WARNING! install the child restraint to find the tether anchorage. You may need to move the seat forward  An incorrectly anchored tether strap could lead to  Do not allow people to ride in any area of your vehicle to provide better access to the tether anchorage.
Page 202: Safety Checks You Should Make Inside The Vehicle
SAFETY Defroster AFETY HECKS HOULD WARNING! NSIDE EHICLE Check operation by selecting the defrost mode and place  ALWAYS REMOVE THE EXISTING FLOOR the blower control on high speed. You should be able to MAT FROM THE VEHICLE before installing Seat Belts feel the air directed against the windshield.
Page 203 SAFETY Door Latches ERIODIC AFETY HECKS HOULD WARNING! Check for proper closing, latching, and locking. UTSIDE EHICLE  ALWAYS make sure objects cannot fall or slide into Fluid Leaks the driver’s side floor area when the vehicle is Tires moving. Objects can become trapped under acceler- Check area under the vehicle after overnight parking for Examine tires for excessive tread wear and uneven wear ator, brake, or clutch pedals and could cause a loss...
Page 204: Exhaust Gas
SAFETY The best protection against carbon monoxide entry into XHAUST ARBON ONOXIDE ARNINGS the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of the exhaust Exhaust gases can injure or kill. They contain carbon Carbon monoxide (CO) in exhaust gases is deadly.
Page 205: In Case Of Emergency
Other services will When the button is activated, all directional turn signals only be operable if your Dodge Connected services is will flash on and off to warn oncoming traffic of an active and you are connected to an operable LTE emergency.
Page 206 REASON (INCLUDING DURING OR AFTER AN ACCI- SOS operator until the SOS operator terminates through the vehicle audio system to determine if DENT), THE DODGE CONNECT FEATURES, APPS AND the connection. additional assistance is needed. SERVICES, AMONG OTHERS, WILL NOT OPERATE.
Page 207 IN CASE OF EMERGENCY SOS Call System Limitations Even if the SOS Call system is fully functional, factors WARNING! beyond FCA US LLC’s control may prevent or stop the Vehicles sold in Mexico DO NOT have SOS Call system SOS Call system operation. These include, but are not ALWAYS obey traffic laws and pay attention to the road.
Page 208: Jacking And Tire Changing
 Being under a jacked-up vehicle is dangerous. The  Dodge Connect Customer Care – Total support for changing the wheel. vehicle could slip off the jack and fall on you. You Radio, Phone and NAV issues.
Page 209: If Equipped
IN CASE OF EMERGENCY Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if the driver’s front wheel is being changed, block the passenger’s rear wheel. Jack, Tools And Spare Tire Location Spare Tire To access the jack, tools and spare tire proceed as follows: Remove the fastener securing the spare tire by...
Page 210: Jacking Instructions
IN CASE OF EMERGENCY ACKING NSTRUCTIONS WARNING!  Only use the jack in the positions indicated and for WARNING! lifting this vehicle during a tire change. Carefully follow these tire changing warnings to help  If working on or near a roadway, be extremely careful prevent personal injury or damage to your vehicle: of motor traffic.
Page 211 IN CASE OF EMERGENCY Remove the jack, wheel bolt wrench and spare tire. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the wheel bolts on the wheel with the flat tire. Turn the wheel bolts counter- clockwise one turn while the wheel is still on the ground.
Page 212 IN CASE OF EMERGENCY NOTE: WARNING!  For vehicles equipped, do not attempt to install a Raising the vehicle higher than necessary can make the center cap or wheel cover on the compact spare. vehicle less stable. It could slip off the jack and hurt ...
Page 213: Tire Inflator Kit - If Equipped
IN CASE OF EMERGENCY TIRE INFLATOR KIT — IF EQUIPPED 10. Lower the jack until it is free. Remove the wheel The Tire Inflator Kit includes: blocks. Stow the wheel bolt wrench, jack assembly  Power Cord. and wheel blocks in the provided storage. Secure the Use this QR code to access your digital ...
Page 214: Inflation Procedure
IN CASE OF EMERGENCY NOTE: NFLATION ROCEDURE WARNING! Always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional  Keep the Tire Service Kit away from open flames or WARNING! details. heat sources.  The information required by current legislation is To use your Tire Inflator Kit, proceed as follows: ...
Page 215 IN CASE OF EMERGENCY Switch the compressor on. 12. If you still cannot obtain a pressure of at least 26 psi (1.8 bar) within 15 minutes of turning the compressor 10. Inflate the tire to the pressure indicated on the tire on, do not drive the vehicle, and contact an placard, located on the driver’s side B-pillar or the authorized dealer.
Page 216: Checking And Restoring Tire Pressure
IN CASE OF EMERGENCY 16. Apply the adhesive label from the sealant bottle Push the air release button.  The sealant is effective with external temperatures of where it can be easily seen by the driver as a between -40°F (-40°C) and 122°F (50°C). reminder that the tire has been treated with a Tire The sealant has an expiration date.
Page 217: Jump Starting
IN CASE OF EMERGENCY JUMP STARTING Pull upward and remove the protective cover over the REPARATIONS TART positive (+) battery post. The battery in your vehicle is located in the rear of the If your vehicle has a discharged battery, it can be jump If using another vehicle to jump start the battery, park engine compartment, behind the left headlight assembly.
Page 218: Jump Starting Procedure
IN CASE OF EMERGENCY Disconnecting The Jumper Cables TARTING ROCEDURE Disconnect the negative (-) end of the jumper cable from the engine ground of the vehicle with the WARNING! discharged battery. Failure to follow this jump starting procedure could Disconnect the opposite end of the negative (-) result in personal injury or property damage due to jumper cable from the negative (-) post of the booster battery explosion.
Page 219: Refueling In Emergency
IN CASE OF EMERGENCY REFUELING IN EMERGENCY Emergency Gas Can Refueling CAUTION! Most gas cans will not open the flapper doors. A funnel is The vehicle is equipped with a refueling funnel for a To avoid fuel spillage and overfilling, do not “top off” the provided to allow emergency refueling with a gas can.
Page 220: If Your Engine Overheats
IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS GEAR SELECTOR OVERRIDE If the temperature gauge is moving towards or close to the HOT (H) position, you can reduce the potential for overheating by taking the appropriate action. If the vehicle is overheating, it will need to be serviced by If a malfunction occurs, and the gear selector cannot be an authorized dealer.
Page 221: Freeing A Stuck Vehicle
IN CASE OF EMERGENCY FREEING A STUCK VEHICLE Locate the gear selector override access (at the right NOTE: rear corner of the gear selector assembly). Using a Push the ESC OFF button (if necessary), to place the Elec- small screwdriver or similar tool, push and hold the tronic Stability Control (ESC) system in the “Off”...
Page 222: Towing A Disabled Vehicle
IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. TOWING CONDITION WHEELS OFF THE GROUND ALL-WHEEL DRIVE (AWD) Flat Tow NONE NOT ALLOWED REAR NOT ALLOWED Dolly Tow FRONT NOT ALLOWED On Trailer...
Page 223: Without The Key Fob
IN CASE OF EMERGENCY — I ITHOUT QUIPPED CAUTION! Special care must be taken when the vehicle is towed with Your vehicle may be equipped with a tow eye that can be  Do not use the tow eye to free a stuck vehicle the ignition in the OFF mode.
Page 224: Enhanced Accident Response System (Ears)
IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM Tow Eye Installation The rear tow eye receptacle is located behind an access (EARS) door on the passenger’s side of the rear fascia/bumper. To install the tow eye, open the access door using a small This vehicle is equipped with an Enhanced Accident screwdriver or similar tool.
Page 225: Servicing And Maintenance
SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change indicator Once A Month Or Before A Long Trip: message after completing the scheduled oil change. If a  Check engine oil level. scheduled oil change is performed by someone other than Your vehicle is equipped with an automatic oil change ...
Page 226: Maintenance Plan
SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System Change oil and filter. Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. Inspect battery and clean and tighten terminals as required.
Page 227 SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: Or Kilometers: Inspect the rear differential fluid level. Inspect front accessory drive belt, tensioner, idler pulley, and replace if necessary. Replace engine air cleaner filter. Replace brake fluid every two years, regardless of mileage. Replace the cabin air filter.
Page 228: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 2.0L E NGINE 1 — Engine Oil Fill 6 — Intercooler Coolant Reservoir Cap 2 — Engine Air Cleaner Filter 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir Cap 8 — Engine Coolant Pressure Cap 4 —...
Page 229: Checking Oil Level
SERVICING AND MAINTENANCE HECKING EVEL DDING ASHER LUID WARNING! To ensure proper engine lubrication, the engine oil must The fluid reservoir is located in the front of the engine  Battery fluid is a corrosive acid solution and can burn be maintained at the correct level.
Page 230: Pressure Washing
SERVICING AND MAINTENANCE Materials Added To Engine Oil RESSURE ASHING NGINE The manufacturer strongly recommends against the Engine Oil Selection Cleaning the engine compartment with a high pressure addition of any additives (other than leak detection dyes) washer is not recommended. For engine oil selection page 269.
Page 231: Engine Air Cleaner Filter
SERVICING AND MAINTENANCE NGINE LEANER ILTER CAUTION! For the proper maintenance intervals Ú page 224. Do not overtighten the engine air cleaner filter cover lid screws or damage may result. WARNING! The air induction system (air cleaner, hoses, etc.) can ONDITIONER AINTENANCE provide a measure of protection in the case of engine...
Page 232: Body Lubrication
SERVICING AND MAINTENANCE NOTE: IPER LADES CAUTION! Use only the manufacturer approved A/C system PAG Clean the rubber edges of the wiper blades and the compressor oil, and refrigerants. Do not use chemical flushes in your air conditioning windshield and rear window periodically with a sponge or system as the chemicals can damage your air Cabin Air Filter soft cloth and a mild nonabrasive cleaner.
Page 233 SERVICING AND MAINTENANCE Service Position Strategy Function Deactivation And Reset: Push the wiper blade up and remove it.  The ignition is placed in the ON/RUN position. The Service Position Strategy places the wiper blades in a position that allows them to be easily changed. ...
Page 234: Exhaust System
SERVICING AND MAINTENANCE Rear Wiper Blade Removal/Installation WARNING! Lift the rear wiper arm pivot cap away from the glass.  Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you page 199.
Page 235: Cooling System
SERVICING AND MAINTENANCE Cooling System — Drain, Flush And Refill Under normal operating conditions, the catalytic converter OOLING YSTEM will not require maintenance. However, it is important to Some vehicles require special tools to add coolant keep the engine properly tuned to ensure proper catalyst properly.
Page 236 SERVICING AND MAINTENANCE  This vehicle has not been designed for use with Use higher concentrations (not to exceed 70%) if The cap should be inspected and cleaned if there is any propylene glycol-based engine coolant. Use of temperatures below −34°F (−37°C) are anticipated. accumulation of foreign material on the sealing surfaces.
Page 237 SERVICING AND MAINTENANCE Coolant Level With the engine OFF and cold, the level of the engine on the radiator and being vaporized when the thermostat coolant should be within the OK range between the opens, allowing hot engine coolant (antifreeze) to enter The coolant expansion bottle provides a quick visual ADD and FULL range on the dipstick.
Page 238: Brake System
SERVICING AND MAINTENANCE — RAKE YSTEM UTOMATIC RANSMISSION WARNING! QUIPPED In order to ensure brake system performance, all brake  Use only the manufacturer recommended brake fluid system components should be inspected periodically. page 269. Using the wrong type of brake fluid can Ú...
Page 239: Fuses
SERVICING AND MAINTENANCE The fuses protect electrical systems against excessive USES CAUTION! current. General Information If a transmission fluid leak occurs, visit an authorized When a device does not work, you must check the fuse dealer immediately. Severe transmission damage may element inside the blade fuse for a break/melt.
Page 240 SERVICING AND MAINTENANCE Power Distribution Center/Fuses And Relays The Front Power Distribution Center is located in the engine compartment. This module contains fuses and relays. Fuse cavity locations are printed on the inside of the power distribution center cover. CAUTION! When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched.
Page 241 SERVICING AND MAINTENANCE The fuse box screw and cover must be removed to gain 1 — Fuse Cover access to the fuses. 2 — Locking Screw For fuse box access, proceed as follows: Turn the locking screw counterclockwise. Slowly release the screw. Remove the fuse box cover by sliding it upward.
Page 242 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Maxi Fuse Mini Fuse Description * If Equipped – – 7.5 Amp Brown – 40 Amp Orange – BSM Pump – – 10 Amp Red ECM / TCM / AGSM – – 10 Amp Red Engine Primary Loads –...
Page 243 SERVICING AND MAINTENANCE Relays Cavity Maxi Fuse Mini Fuse Description – – Not Used – 30 Amp Horn – 30 Amp A/C Compressor – 30 Amp Rad Fan Enable 50 Amp – Aux.1 / DTCM – 30 Amp HVAC Fan –...
Page 244 SERVICING AND MAINTENANCE Interior Fuses The interior fuse panel is located under the driver’s side lower instrument panel. Interior Fuse Box Location Cavity Mini Fuse Description *If Equipped 7.5 Amp Brown HVAC Relay Coil & Power Outlet / Seat Relay Coil 20 Amp Yellow Front Passenger Window Lifter 20 Amp Yellow...
Page 245 SERVICING AND MAINTENANCE Cavity Mini Fuse Description *If Equipped 10 Amp Red Brake Switch / DASM / IPC 20 Amp Yellow Door Lock & Unlock / Liftgate Release 7.5 Amp Brown Brake System Module, Electric Power Steering 20 Amp Yellow Bi-Directional Washer Pump 20 Amp Yellow Rear Left Window Lifter...
Page 246 SERVICING AND MAINTENANCE Rear Cargo Fuse/Relay Distribution Unit — The fuses may be contained in two units. Fuse Holder No. 1 is located closest to the rear of the vehicle and If Equipped Fuse Holder No. 2 (If equipped with trailer towing) is To access the fuses, remove the access door from the left located closest to the front of the vehicle.
Page 247 SERVICING AND MAINTENANCE Fuse Holder No. 1 Cavity Mini Fuse Description * If Equipped 20 Amp Yellow Sunroof* – – 30 Amp Green Power Liftgate Module (PLGM) 5 Amp Tan Driver And Passenger Ventilated Seats (HMSM*) 25 Amp Clear Heating And Memory Drive Seat Module 1 10 Amp Red Heating And Memory Drive Seat Module 2 7.5 Amp Brown...
Page 248: Bulb Replacement
SERVICING AND MAINTENANCE Tire Markings NOTE: EPLACEMENT  P (Passenger) — Metric tire sizing is based on US design Replacement Bulbs, Names, And Part standards. P-Metric tires have the letter “P” molded Numbers into the sidewall preceding the size designation. Example: P215/65R15 95H.
Page 249 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
Page 250 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index  A numerical code associated with the maximum load a tire can carry H = Speed Symbol  A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
Page 251 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Page 252 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least Cold Tire Inflation Pressure three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 253 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: Number of people that can be carried in the vehicle. NOTE: The proper cold tire inflation pressure is listed on the Total weight your vehicle can carry. driver’s side B-pillar or the rear edge of the driver's side Tire size designed for your vehicle.
Page 254 SERVICING AND MAINTENANCE Steps For Determining Correct Load (4) The resulting figure equals the Metric Example For Load Limit Limit— available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and there will be five 68 kg passengers in your vehicle, the amount of load capacity.
Page 255 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 256: Tires - General Information
SERVICING AND MAINTENANCE — G Tire Inflation Pressures IRES ENERAL NFORMATION WARNING! The proper cold tire inflation pressure is listed on the Tire Pressure  Unequal tire pressures from one side of the vehicle driver's side B-pillar or rear edge of the driver's side door. to the other can cause the vehicle to drift to the Proper tire inflation pressure is essential to the safe and At least once a month:...
Page 257 SERVICING AND MAINTENANCE Radial Ply Tires Example: If garage temperature = 68°F (20°C) and the Once a Run Flat tire reaches the Run Flat mode it has outside temperature = 32°F (0°C) then the cold tire limited driving capabilities and needs to be replaced inflation pressure should be increased by 3 psi (21 kPa), immediately.
Page 258 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact Tread wear indicators are in the original equipment tires to The service life of a tire is dependent upon varying factors with oil, grease, and gasoline.
Page 259: Tire Types
SERVICING AND MAINTENANCE YPES WARNING! WARNING! All Season Tires — If Equipped  Do not use a tire, wheel size, load rating, or speed Do not use Summer tires in snow/ice conditions. You rating other than that specified for your vehicle. could lose vehicle control, resulting in severe injury or All Season tires provide traction for all seasons (Spring, Some combinations of unapproved tires and wheels...
Page 260: Spare Tires - If Equipped
SERVICING AND MAINTENANCE — I Compact Spare Tire — If Equipped Full-Size Spare — If Equipped PARE IRES QUIPPED The compact spare is for temporary emergency use only. The Full-Size spare is for temporary emergency use only. NOTE: You can identify if your vehicle is equipped with a compact This tire may look like the originally equipped tire on the For vehicles equipped with Tire Service Kit instead of a spare by looking at the spare tire description on the...
Page 261: Snow Traction Devices
SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage:  Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...
Page 262: Tire Rotation Recommendations
SERVICING AND MAINTENANCE All passenger vehicle tires must conform OTATION ECOMMENDATIONS CAUTION! to Federal safety requirements in The tires on the front and rear of your vehicle operate at Proper operation of four-wheel drive vehicles depends addition to these grades. different loads and perform different steering, handling, on tires of equal size, type and circumference on each and braking functions.
Page 263: Traction Grades
SERVICING AND MAINTENANCE STORING THE VEHICLE Sustained high temperature can cause RACTION RADES the material of the tire to degenerate The Traction grades, from highest to If you are storing your vehicle for more than three weeks, and reduce tire life, and excessive we recommend that you take the following steps to lowest, are AA, A, B, and C.
Page 264: Bodywork
SERVICING AND MAINTENANCE BODYWORK Mopar® Chrome Cleaner or their equivalent is NDERBODY AINTENANCE recommended, or select a non-abrasive, non-acidic Wheel And Wheel Trim Care cleaner for aluminum or chrome wheels. ROTECTION TMOSPHERIC All wheels and wheel trim, especially aluminum and GENTS CAUTION! chrome plated wheels, should be cleaned regularly using...
Page 265: Preserving The Bodywork
SERVICING AND MAINTENANCE INTERIORS Cleaning Headlights CAUTION! Your vehicle is equipped with plastic headlights and fog  Do not use abrasive or strong cleaning materials EATS ABRIC ARTS lights that are lighter and less susceptible to stone such as steel wool or scouring powder that will breakage than glass headlights.
Page 266: Plastic And Coated Parts
SERVICING AND MAINTENANCE Seat Belt Maintenance Total Clean. Care should be taken to avoid soaking your CAUTION! leather upholstery with any liquid. Please do not use Do not bleach, dye or clean the belts with chemical polishes, oils, cleaning fluids, solvents, detergents, or ...
Page 267: Technical Specifications
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) If either of the two hydraulic systems lose normal ORQUE PECIFICATIONS capability, the remaining system will still function with some loss of overall braking effectiveness. This will be The VIN is found on the left front corner of the windshield Lug Nut/Bolt **Lug Nut/Bolt Lug Nut/Bolt...
Page 268: Fuel Requirements
TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS First tighten the lug nuts/bolts in a star pattern until each The use of reformulated gasoline is recommended. nut/bolt has been tightened to 14.7 ft-lb (20 N·m). Then Properly blended reformulated gasoline will provide repeat the operation until each lug nut/bolt has been improved performance and durability of engine and fuel While operating on gasoline with the required octane tightened to 88.5 ft-lb (120 N·m).
Page 269: Usage In Non-Flex Fuel Vehicles
TECHNICAL SPECIFICATIONS E-85 U Indiscriminate use of fuel system cleaning agents should SAGE ETHYLCYCLOPENTADIENYL be avoided. Many of these materials intended for gum and (MMT) I EHICLES ANGANESE RICARBONYL varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and ASOLINE Non-Flex Fuel Vehicles (FFV) are compatible with gasoline diaphragm materials.
Page 270: Fluid Capacities
TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) All Engines 13.5 gal 51 L Engine Oil With Filter 2.0L Engine 5 qt 4.73 L Cooling System* 2.0L Engine 7 qt 6.6 L 2.0L Engine Low Temp 2.3 qt 2.17 L * Includes heater and coolant recovery bottle filled to MAX level.
Page 271: Engine Fluids And Lubricants
TECHNICAL SPECIFICATIONS ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Miles Engine Coolant (240,000 Kilometers) Formula OAT (Organic Additive Technology) meeting the requirements of the manufacturer Material Standard MS.90032. We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-13340.
Page 272: Customer Assistance
CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE This is why you should always talk to an authorized EASONABLE EQUESTS dealer’s service manager first. If for some reason you are FOR YOUR VEHICLE If you list a number of items and you must have your still not satisfied, talk to the general manager or owner of vehicle by the end of the day, discuss the situation with the the authorized dealer.
Page 273: Roadside Assistance
Vehicle Identification Number (VIN) required for FCA US LLC. closest authorized Chrysler, Dodge, Jeep®, or Ram dealer. covered services, license plate number, and your location, Flat Tire Service If you choose to go to another dealer, you will be...
Page 274: Fca Us Llc Customer Center
CUSTOMER ASSISTANCE FCA US LLC C FCA US LLC is not responsible for any service contract you USTOMER ENTER USTOMER SSISTANCE may have purchased from another manufacturer. If you EARING PEECH MPAIRED P.O. Box 21–8004 require service after the FCA US LLC New Vehicle Limited (TDD/TTY) Warranty expires, please refer to the contract documents, Auburn Hills, MI 48321–8004...
Page 275: Warranty Information
CUSTOMER ASSISTANCE WARRANTY INFORMATION REPORTING SAFETY DEFECTS To contact NHTSA, you may call the Vehicle Safety Hotline toll free See the Warranty Information for the terms and provisions 50 U NITED TATES at 1-888-327-4236 of FCA US LLC warranties applicable to this vehicle and , D.C.
Page 276: Publication Order Forms
CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS CHANGE OF OWNERSHIP OR ADDRESS Owner's Manuals These Owner's Manuals have been prepared with the To order the following manuals, you may use either the *If you have purchased this vehicle used or have changed assistance of service and engineering specialists to website or the phone numbers provided.
Page 277: General Information
CUSTOMER ASSISTANCE GENERAL INFORMATION La operación de este equipo está sujeta a las siguientes Le présent appareil est conforme aux CNR d`Innovation, dos condiciones: Science and Economic Development applicables aux appareils radio exempts de licence. L'exploitation est The following regulatory statement applies to all es posible que este equipo o dispositivo no cause autorisée aux deux conditions suivantes: Radio Frequency (RF) devices equipped in this vehicle.
Page 278 CUSTOMER ASSISTANCE Déclaration d’exposition aux radiations residential area is likely to cause harmful interference in BLIND SPOT MONITORING SYSTEM: which case the user will be required to correct the Cet équipement est conforme aux limites d’exposition aux interference at his own expense. Radiofrequency radiation rayonnements ISED établies pour un environnement non FCC ID: WU877V12CRN exposure Information: This equipment complies with...
Page 279 INDEX Air Pressure Automatic High Beams ..........41 Tires................254 Automatic Temperature Control (ATC) ......49 Active Driving Assist System ........101 Alarm Automatic Transaxle............85 Active Speed Limiter ............90 Arm The System............20 Automatic Transmission ..........86 Adaptive Cruise Control (ACC) ........92 Disarm The System ...........
Page 280 Brake System ............236 Child Restraints Points To Remember ..........235 Anti-Lock (ABS)............265 Booster Seats ............191 Pressure Cap ............234 Fluid Check.............236 Child Seat Installation..........198 Radiator Cap............234 Master Cylinder............236 How To Stow An unused ALR Seat Belt ....195 Selection Of Coolant (Antifreeze) ..
Page 281 Oil Filter..............228 Fluid, Brake..............269 Oil Selection........... 228 Fold-Flat Seats..............28 Electric Brake Control System........155 Oil Synthetic.............228 Folding Rear Seats ............28 Anti-Lock Brake System ......... 154 Overheating .............218 Forward Collision Warning ........... 162 Traction Control System ........ 157 Starting...............
Page 282 Instrument Cluster Display Latches ................. 201 Locations and Controls ..........66 Hood................58 Hazard Navigation..............69 Leaks, Fluid..............201 Driving Through Flowing, Rising, Instrument Panel Lens Cleaning .........264 Life Of Tires..............256 Or Shallow Standing Water ....... 128 Intelligent Adaptive Cruise Control System....100 Liftgate ................
Page 283 Headlight Switch............40 Low Tire Pressure System..........165 Oil Filter, Change ............228 Headlights ..............40 Lubrication, Body ............230 Oil Filter, Selection ............228 Headlights On With Wipers ........41 Lug Nuts/Bolts..............265 Oil Pressure Light ............73 High Beam............40 Oil, Engine ............228 High Beam/Low Beam Select........40 Capacity ..............
Page 284 Pets ................199 Release, Hood..............58 Seat Belts.............169 Placard, Tire And Loading Information ....... 251 Reminder, Lights On............41 Adjustable Shoulder Belt ........172 Power Reminder, Seat Belt .............169 Adjustable Upper Shoulder Anchorage....172 Door Locks ..............22 Remote Control Adjustable Upper Shoulder Belt Anchorage..172 Liftgate ...............60 Starting System ............
Page 285 Selection Of Coolant (Antifreeze)........ 269 Stuck, Freeing ...............219 Radial............... 255 Sentry Key (Immobilizer)..........16 Sun Roof..............56 Replacement ............256 Service Assistance ............270 Sun Visor ................. 34 Rotation ..............260 Service Contract............272 Supplemental Restraint System – Air Bag....176 Safety..............246 Service Manuals............
Page 286 Transmission ..............86 Wheel And Wheel Tire Care ......... 262 Automatic ............86 Wheel And Wheel Tire Trim.......... 262 Vanity Mirrors..............34 Fluid ................. 269 Wind Buffeting..............56 Vehicle Loading........... 120 Maintenance ............236 Window Fogging ............. 50 Vehicle Maintenance............228 Transporting Pets ............199 Windows................
Page 287 This Owner’s Manual has been prepared to help you get acquainted with your new Dodge brand vehicle and to provide a convenient reference source for common questions. Not all features shown in this manual may apply to your vehicle. For additional information, visit mopar.com/om (U.S.), owners.mopar.ca (Canada) or your local Dodge brand dealer.
Page 288 ©2022 FCA US LLC. ALL RIGHTS RESERVED. TOUS DROITS RÉSERVÉS. DODGE IS A REGISTERED TRADEMARK OF FCA US LLC OR FCA CANADA INC., USED UNDER LICENSE. DODGE EST UNE MARQUE FIRST EDITION V1 DÉPOSÉE DE FCA US LLC OU FCA CANADA INC., UTILISÉE SOUS LE PERMIS. APP STORE IS A REGISTERED TRADEMARK OF APPLE INC. GOOGLE PLAY STORE IS A REGISTERED TRADEMARK OF GOOGLE.

Dodge HORNET 2023 Owner's Manual

Quick Links

Related Manuals for Dodge HORNET 2023

Summary of Contents for Dodge HORNET 2023