Dodge B-I-B 1948 Driver Manual page 23

REAR END AND REAR AXLE LUBRICATION
EVERY 1,000 MILES
1.
&
2. REAR SPRING SHACKLE-2 flttings each side. Semi-fluid Chassis
Lubricant.
3. & 4.
REAR SPRING BOLT -1 fltting each side. Semi-fluid Chassis Lubricant.
5.
UNIVERSAL JOINT -1 fitting. Semi-fluid Chassis Lubricant.
EVERY 15,000 MILES
6. & 7. REAR WHEEl BEARINGS-Remove plug and insert fltting. Inject Yl oz.
Short Fiber Wheel Bearing Grease. Reinstall plug. CAUTION: Do
not use high-pressure gun, nor excess lubricant.
8. REAR AXLE DIFFERENTIAL-(Capacity
3~
ph.) Drain, flush with
flushing oil and reflll with non-corrosive TRUCK DUTY Hypoid Lubricant
or non-corrosive type of Hypoid Lubricant satisfactory for field servic·
ing of both truck and passenger car hypoid rear axles.
If it is anticipated that the atmospheric temperature will be:
Above - 10° F . •.•• •• •••.....••••. . ....••••.• • •• Use SAE 90
Below - 10° F .• .••••••• •• .••• •• ••. • . • . • Use SAE 90 blended
with 20% of No.1 OW
Engine Oil or use SAE
80 Hypoid Lubricant
20