Page 1 Caliber 2 0 1 0 O W N E R ’ S M A N U A L...
Page 2: Introduction
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 4: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 5: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 6 INTRODUCTION 5...
Page 7: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 8: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 10: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 To Set The Security Alarm ....18 Ignition Key Removal .
Page 11 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Remote Key Lock ..21 Power Windows — If Equipped ... . 33 Flash Lights With Remote Key Lock/Unlock .
Page 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Seat Belt Pretensioners — If Equipped ..50 Event Data Recorder (EDR) ....72 Energy Management Feature .
Page 13: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service.
Page 15: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY CAUTION! The Sentry Key Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The An unlocked car is an invitation to thieves. Always system does not need to be armed or activated. Operation remove the key from the ignition and lock all the is automatic, regardless of whether the vehicle is locked doors when leaving the vehicle unattended.
Page 16: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 seconds for a bulb check. If the light remains on after the All of the keys provided with your new vehicle have bulb check, it indicates that there is a problem with the been programmed to the vehicle electronics.
Page 17: Customer Key Programming
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE dealer or by following the customer key programming seconds, but no longer than 15 seconds. Then, turn the procedure. This procedure consists of programming a ignition switch to the LOCK position and remove the first blank key to the vehicle electronics.
Page 18: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 • This device may not cause harmful interference. The new Sentry Key is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- • This device must accept any interference that may be grammed during this procedure.
Page 19: To Set The Security Alarm
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Set The Security Alarm To Disarm The System Press UNLOCK on the RKE transmitter, or insert the key 1. Remove the key from the ignition switch and get out into the ignition switch and turn the ignition switch to of the vehicle.
Page 20: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal.
Page 21: Illuminated Approach - If Equipped
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Security Alarm activated will cause the alarm to sound. following steps: Press the UNLOCK button to deactivate the Vehicle Security Alarm. 1. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than Illuminated Approach —...
Page 22: To Lock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Lock The Doors And Liftgate 1. Press the LOCK button on a programmed RKE trans- Press and release the LOCK button on the RKE transmit- mitter for at least 4 seconds, but no longer than 10 sec- ter to lock all doors and liftgate.
Page 23: Flash Lights With Remote Key Lock/Unlock
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights With Remote Key Lock/Unlock 3. Test the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter This feature will cause the turn signal lights to flash when with the ignition switch in the LOCK position and the the doors are locked or unlocked with the RKE transmit- key removed.
Page 24: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 The Panic Alarm will stay on for three minutes unless 2. This device must accept any interference that may be you turn it off by pressing the PANIC button a second received including interference that may cause undesired time or if the vehicle speed is 5 mph (8 km/h) or greater.
Page 25: Transmitter Battery Replacement
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may apply. See “www.dtsc.ca.gov/hazardouswaste/perchlorate.” The recommended replacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw, remove the screw. With the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter apart.
Page 26: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • Brake switch inactive (brake pedal not pressed) REMOTE STARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry • Ignition key removed from ignition switch (RKE) transmitter to start the engine conve- •...
Page 27 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Remote start will also cancel if any of the following occur: Press and release the REMOTE START button • The engine stalls or RPM exceeds 2500 on the RKE transmitter twice, within five sec- •...
Page 28: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 To Exit Remote Start Mode and Drive the Vehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped).
Page 29: Power Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! CAUTION! • Do not leave children or animals inside parked An unlocked vehicle is an invitation to thieves. vehicles in hot weather. Interior heat build-up may Always remove the key from the ignition and lock all cause serious injury or death.
Page 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not previously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter.
Page 31 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: • If you do not hear the chime it means that the system following procedure: did not enter the programming mode and you will 1.
Page 32: Child-Protection Door Lock System (Rear Doors) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Automatic Unlock Doors on Exit Programming 4. A single chime will indicate the completion of the The Automatic Unlock Doors On Exit feature can be programming. enabled or disabled as follows: 5. Repeat these steps if you want to return this feature to •...
Page 33 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To engage or disengage the Child-Protection Door Lock system 1. Open the rear door. 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. 3.
Page 34: Power Windows - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver’s door trim panel control all the door windows.
Page 35: Auto-Down
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 min- utes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 36: Window Lockout Switch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Window Lockout Switch LIFTGATE The window lockout switch on the driver’s door allows NOTE: The key that is used to start your vehicle is also you to disable the window control on the other doors. To used to lock or unlock the doors and open the liftgate.
Page 37 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Once unlocked, the liftgate can be opened or closed NOTE: • In the event of a power malfunction, or the RKE without using the key. To open the liftgate, squeeze the liftgate release and pull the liftgate open with one fluid transmitter is inoperative, insert the key into the motion.
Page 38: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • Supplemental Active Head Restraints (AHR) located WARNING! (Continued) on top of the front seats (integrated into the head • If you are required to drive with the liftgate open, restraint) make sure that all windows are closed, and the •...
Page 39 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat belt webbing into position by extending the belt WARNING! all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large In a collision, you and your passengers can suffer item in a seat —...
Page 40: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 ejection and the risk of injury caused by striking the WARNING! inside of the vehicle. Everyone in a motor vehicle should • It is dangerous to ride in a cargo area, inside or be belted at all times.
Page 41 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is along side the pillar near the WARNING! (Continued) back of your seat. Grasp the latch plate and pull out the • Wearing your belt in the wrong place could make belt.
Page 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
Page 43 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! (Continued) abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
Page 45: Adjustable Upper Shoulder Belt Anchorage
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best.
Page 46: Lap/ Shoulder Belt Operating Instructions With A Mini-Latch And Buckle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Lap/ Shoulder Belt Operating Instructions With A Mini-Latch And Buckle A three point seatbelt with a mini-latch and buckle, allows the shoulder belt to detach from the lower anchor when the seat is folded. The mini-buckle and shoulder belt can then be stored out of the way in the right side trim panel for added convenience.
Page 47 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Grasp the mini-latch plate and pull the belt over the 5. Sit back in seat. Slide the regular latch plate up the seat. webbing as far as necessary to allow the belt to go around your lap.
Page 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 7. Position the lap belt across your thighs, below your 8. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap belt portion, pull up comfortable and not resting on your neck.
Page 49: Lap/Shoulder Belt Untwisting Procedure
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 10. To disengage the mini-latch from the mini-buckle for 3. Slide the latch plate upward over the folded webbing. storage, insert the regular latch plate into the black The folded webbing must enter the slot at the top of the button on the top of the mini-buckle.
Page 50: Seat Belts In Passenger Seating Positions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 When To Engage The Automatic Locking Mode Seat Belts In Passenger Seating Positions Use the Automatic Locking Mode anytime a child safety The seat belts in the passenger seating positions are seat is installed in a seating position that has a belt with equipped with an Automatic Locking Retractor (ALR) this feature.
Page 51: Seat Belt Pretensioners - If Equipped
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE to retract completely in this case and then carefully pull The pretensioners are triggered by the Occupant Re- out only the amount of webbing necessary to comfort- straint Controller (ORC). Like the airbags, the pretension- ably wrap around the occupants mid-section.
Page 52: Supplemental Active Head Restraints (Ahr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 How the Active Head Restraints (AHR) Work WARNING! The Occupant Restraint Controller (ORC) determines • The belt and retractor assembly must be replaced whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy.
Page 53 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 55 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mecha- nism NOTE: • If you have difficulties or problems resetting the 4. The AHR front soft foam and trim half should lock Active Head Restraints, see an authorized dealer.
Page 56: Enhanced Seat Belt Use Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Enhanced Seat Belt Use Reminder System NOTE: The following steps must occur within the first (BeltAlert ) 60 seconds of the ignition switch being turned to the ON If the driver’s seat belt has not been buckled within or START position.
Page 57: Seat Belt Extender
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert can be reactivated by repeating this procedure. WARNING! NOTE: Although BeltAlert has been deactivated, the Using a seat belt extender when not needed can Seat Belt Reminder Light will continue to illuminate increase the risk of injury in a collision.
Page 58: Supplemental Restraint System (Srs) - Airbags
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Supplemental Restraint System (SRS) — Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel.
Page 59 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Airbags have a multistage inflator vehicle may also be equipped with Supplemental Seat- design. This allows the airbag to have different rates of Mounted Side Airbags (SAB). If the vehicle is equipped inflation that are based on the severity and type of with Supplemental Seat-Mounted Side Airbags they are collision.
Page 60: Advanced Front Airbag Features
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • Instrument Panel determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact • Knee Impact Bolster sensors. • Driver Advanced Front Airbag The first stage inflator is triggered immediately during an •...
Page 61 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE side impact. The Supplemental Seat-Mounted Side Air- WARNING! (Continued) bag is marked with an airbag label sewn into the out- • Do not put anything on or around the airbag board side of the front seats. covers or attempt to open them manually.
Page 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 deploys independently, that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag. Supplemental Side Airbag Inflatable Curtain (SABIC) SABIC airbags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
Page 63 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors adjacent to both Supplemental Driver Side Knee Airbag front and rear seat occupants that are calibrated to deploy The supplemental driver side knee airbag provides en- the SABIC airbags during impacts that require airbag hanced protection and works together with the advanced occupant protection.
Page 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying airbag: children to slide the shoulder belt behind them or under their arm.
Page 65: Airbag Deployment Sensors And Controls
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Do not lean against the door or window. If your WARNING! (Continued) vehicle has side airbags, and deployment occurs, the • Being too close to the steering wheel or instrument side airbags will inflate forcefully into the space be- panel during Advanced Front Airbag deployment tween you and the door.
Page 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 ORC deploys the Advanced Front Airbags, Supplemental location of impact, Advanced Front Airbags may deploy Driver Side Knee Airbag, SABIC airbags, Supplemental in crashes with little vehicle front-end damage but that Seat-Mounted Side Airbags — if equipped, and front seat produce a severe initial deceleration.
Page 67 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE in the ACC position, or not in the ignition, the airbag WARNING! system is not on and the airbags will not inflate. Ignoring the Airbag Warning Light in your instru- The ORC contains a backup power supply system that ment panel could mean you won’t have the airbags to may deploy the airbags even if the battery loses power or protect you in a collision.
Page 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 separate and fold out of the way as the airbags inflate to Supplemental Seat-Mounted Side Airbag Inflator their full size. The airbags fully inflate in about 50 to 70 Units — If Equipped milliseconds.
Page 69 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain Because airbag sensors estimate deceleration over time, (SABIC) Inflator Units vehicle speed and damage are not good indicators of During collisions where the impact is confined to a whether or not an airbag should have deployed.
Page 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 • Flash hazard lights as long as the battery has power or passenger as the airbags deploy and unfold. The until the ignition key is turned off. abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium •...
Page 71 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not drive your vehicle after the airbags have de- Maintaining Your Airbag System ployed. If you are involved in another collision, the WARNING! airbags will not be in place to protect you. •...
Page 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Airbag Warning Light WARNING! (Continued) You will want to have the airbags ready to • Do not attempt to modify any part of your ad- inflate for your protection in a collision. The vanced airbag system.
Page 73: Event Data Recorder (Edr)
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine NOTE: related gauges are not working, the Occupant Restraint 1. A near-deployment event occurs when the airbag Controller (ORC) may also be disabled. The airbags may sensor detects severe vehicle deceleration usually indica- not be ready to inflate for your protection.
Page 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 In the event that an investigation is undertaken by 1. Used for research purposes, such as to match data Chrysler Group LLC (regardless of initiative), the com- with a particular crash record in an aggregate database, pany or its designated representative will first obtain provided confidentiality of personal data is thereafter permission of the appropriate custodial entity for the...
Page 75: Child Restraints
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Pedal position seat owner’s manual to ensure you have the correct seat for your child. Use the restraint that is correct for your • And other parameters depending vehicle child. configuration WARNING! Child Restraints Everyone in your vehicle needs to be buckled up at all...
Page 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Infants and Child Restraints younger than one year old. Both types of child re- straints are held in the vehicle by the lap/ shoulder • Safety experts recommend that children ride belt or the LATCH child restraint anchorage system. rearward-facing in the vehicle until they are at least Refer to the “LATCH –...
Page 77 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Make sure that the child is upright in the seat. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for • The lap portion should be low on the hips and as snug weight and height limits.
Page 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 are older than one year. These child seats are also held WARNING! in the vehicle by the lap/shoulder belt or the LATCH • Improper installation can lead to failure of an child restraint anchorage system. Refer to LATCH — Child Seat Anchorage System (Lower Anchors and infant or child restraint.
Page 79 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchorage System (Lower LATCH-compatible child restraint systems are now avail- Anchors and Tether for CHildren) able. However, because the lower anchorages are to be introduced over a period of years, child restraint systems WARNING! having attachments for those anchorages will continue to have features for installation using the vehicle’s seat...
Page 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Child seats with fixed lower attachments must be in- stalled in the outboard positions only. If you are installing LATCH-compatible child restraints in adjacent rear seat- ing positions, you can use the LATCH anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position.
Page 81 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing the LATCH – Compatible child Restraint The lower strap hooks are passed over the top of each System bar, pushing aside the seat cover material We urge you to carefully follow the directions of the Many, but not all restraint systems will be manufacturer when installing your child restraint.
Page 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 • When using the LATCH attaching system to install a First loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hook or child restraint, please ensure that all seat belts not connectors to the vehicle anchorages.
Page 83 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using the Vehicle Seat Left Center Right Belt CRS Lock CRS Lock CRS Lock The seat belts in the passenger seating positions are First Row equipped with an Automatic Locking Retractor (ALR) to Second Row secure a Child Restraint System (CRS).
Page 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 2. Finally, pull on any excess webbing to tighten the lap To attach a child restraint tether strap: portion around the child restraint. Any seat belt system • Route the tether strap to provide the most direct path will loosen with time, so check the belt occasionally, and for the strap between the anchor and the child seat, pull it tight if necessary.
Page 85: Engine Break-In Recommendations
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Attach the tether strap hook of the child restraint to the Transporting Pets tether anchor and remove slack in the tether strap Airbags deploying in the front seat could harm your pet. according to the child restraint manufacturer’s An unrestrained pet will be thrown about and possibly instructions.
Page 86: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 The engine oil installed in the engine at the factory is a WARNING! high-quality energy conserving type lubricant. Oil • Do not leave children or animals inside parked changes should be consistent with anticipated climate conditions under which vehicle operations will occur.
Page 87: Exhaust Gas
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate WARNING! control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
Page 88: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Safety Checks You Should Make Inside the Defroster Vehicle Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts.
Page 89 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
Page 90: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Periodic Safety Checks You Should Make Outside Door Latches the Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 92: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......95 Uconnect™ Phone — If Equipped ... 99 Inside Day/Night Mirror .
Page 93 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Commands ......129 To Open And Close The Hood ... . 144 Voice Training .
Page 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Intermittent Wiper System ....152 Gate Operator/Canadian Programming ..162 Windshield Washers ....152 Using HomeLink .
Page 95 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting ..... . 167 Console Features ..... . 176 Sunroof Maintenance .
Page 96: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 97: Outside Mirror - Driver Side
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirror — Driver Side Adjust the flat outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the door glass. Outside Mirror —...
Page 98: Power Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Power Mirrors — If Equipped finished adjusting the mirror, turn the control to the The control for the power mirrors is located on the center position to prevent accidentally moving a mirror. driver’s door trim panel. Mirror Directions Power Mirror Control To adjust a mirror, turn the control wand toward the left...
Page 99: Heated Mirrors - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 100: Uconnect™ Phone - If Equipped
For Uconnect™ customer support, visit the following long as your phone is turned on and has been paired to websites: the vehicle’s Uconnect™ Phone. The Uconnect™ Phone • www.chrysler.com/uconnect allows up to seven cellular phones to be linked to the • www.dodge.com/uconnect...
Page 101 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system. Only one linked (or paired) cellular phone can be Voice Command Button used with the system at a time. The system is available in Actual button location may vary with the ra- English, Spanish, or French languages.
Page 102: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • For each feature explanation in this section, only the The radio display will be used for visual prompts from the Uconnect™ Phone such as CELL or caller ID on combined form of the voice command is given. You certain radios.
Page 103 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the Uconnect™ Phone from idle, simply press The following are general phone to Uconnect™ Phone button and follow the audible prompts for pairing instructions: directions. All Uconnect™ Phone sessions begin with a •...
Page 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • You will then be asked to give your cellular phone a • The system will prompt you to say the number you priority level between one and seven, with one being want to call. the highest priority.
Page 105 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, enter the number designation (e.g., or downloaded phonebook. To learn how to store a name in the phonebook, refer to Add Names to Your Home, Work, Mobile, or Pager ). This will allow Uconnect™...
Page 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • Depending on the maximum number of entries down- Phonebook Download – Automatic Phonebook Transfer From Cellular Phone loaded, there may be a short delay before the latest If equipped and specifically supported by your phone, downloaded names can be used.
Page 107 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phonebook Download — Single Entry first disconnect or drop the Bluetooth connection to If equipped and supported by your phone, Uconnect™ the Uconnect™ Phone, and then send the address Phone allows the user to download entries from their book entry via Bluetooth .
Page 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • You will then be asked for the name of the phonebook Delete Uconnect™ Phonebook Entry entry that you wish to edit. NOTE: Editing phonebook entries is recommended • Next, choose the number designation (home, work, when the vehicle is not in motion.
Page 109 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the Uconnect™ Phone will • Note that only the phonebook in the current language ask you which designation you wish to delete: home, is deleted. work, cellular, pager, or all. Say the designation you •...
Page 110: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • The Uconnect™ Phone will then prompt you as to the call, press and hold the button until you hear a number designation you wish to call. single beep, indicating that the incoming call was rejected.
Page 111 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making a Second Call While Current Call is in indicating that the active and hold status of the two calls Progress have switched. Only one call can be placed on hold at a To make a second call while you are currently on a call, time.
Page 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Call Termination Call Continuation To end a call in progress, momentarily press the Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been button.
Page 113: Uconnect™ Phone Features
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the cellular phone is Language Selection reachable: To change the language that the Uconnect™ Phone is • Pick up the phone and manually dial the emergency using: number for your area.
Page 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available cellular service If you need towing assistance: and area. • Press the button to begin. • If supported, this number may be programmable on •...
Page 115 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Paging When calling a number with your Uconnect™ Phone that To learn how to page, refer to Working with Automated normally requires you to enter in a touch-tone sequence Systems. Paging works properly except for pagers of on your cellular phone keypad, you can press the certain companies, which time out a little too soon to button and say the sequence you wish to enter, followed...
Page 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system tones over the phone. from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it).
Page 117: Advanced Phone Connectivity
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using the Cellular Phone Keypad Mute/Un-Mute (Mute OFF) You can dial a phone number with your cellular phone When you mute the Uconnect™ Phone, you will still be keypad and still use the Uconnect™ Phone (while dialing able to hear the conversation coming from the other via the cellular phone keypad, the user must exercise party, but the other party will not be able to hear you.
Page 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, say List Phones. from your Uconnect™ Phone paired cellular phone to the Uconnect™ Phone or vice versa, press the button • The Uconnect™ Phone will play the phone names of and say Transfer Call.
Page 119: Things You Should Know About Your Uconnect™ Phone
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone Things You Should Know About Your Uconnect™ call. If the selected phone is not available, the Phone Uconnect™ Phone will return to using the highest Uconnect™...
Page 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Speak normally, without pausing, just as you would Repeat the words and phrases when prompted by the Uconnect™ Phone. For best results, the Voice Training speak to a person sitting a few feet/meters away from session should be completed when the vehicle is parked you.
Page 121 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such • In a convertible vehicle, system performance may be as voice mail, or when sending a page, at the end of compromised with the convertible top down. speaking the digit string, make sure to say Send.
Page 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • Performance, such as audio clarity, echo, and loudness Bluetooth Communication Link to a large degree rely on the phone and network, and Cellular phones have been found to lose connection to not the Uconnect™ Phone. the Uconnect™...
Page 123 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123...
Page 125 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 127 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 128: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 129 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If you do not say a command within a few For example, if you are in the disc menu and you are seconds, the system will present you with a list of listening to FM radio, you can speak commands from the options.
Page 130: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Commands In this mode, you can say the following commands: The Voice Command system understands two types of • “Radio” (to switch to the radio mode) commands. Universal commands are available at all •...
Page 131 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Previous Channel” (to select the previous channel) Radio FM To switch to the FM band, say “FM” or “Radio FM”. In • “List Channel” (to hear a list of available channels) this mode, you may say the following commands: •...
Page 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Memo − “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo”. In − “Delete” (to delete a memo) this mode, you may say the following commands: • “Delete All” (to delete all memos) •...
Page 133: Voice Training
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Keep in mind that you have to press the Voice SEATS Command button first and wait for the beep Seats are a primary part of the Occupant Restraint System of the vehicle. They need to be used properly for safe before speaking the “Barge In”...
Page 134: Manual Front Seat Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Manual Front Seat Adjustment WARNING! The adjusting bar is at the front of the seats, near the floor. Pull the bar up to move the seat to the desired Adjusting a seat while the vehicle is moving is position.
Page 135: Manual Seat Height Adjustment - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped Manual Lumbar — If Equipped The driver’s seat height can be raised or lowered by using The lumbar adjustment handle is located on the outboard the handle on the outboard side of the seat to adjust the side of the driver’s seat.
Page 136: Driver's Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Driver’s Seatback Recline WARNING! To recline: Do not ride with the seatback reclined so that the 1. Lean forward before lifting the handle, then lean back shoulder belt is no longer resting against your chest. to the desired position and release the handle.
Page 137: Six-Way Power Seats - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Six-Way Power Seats — If Equipped WARNING! The power seat switch is located on the outboard side of the seat near the floor. Use the switch to move the seat up, Adjusting a seat while the vehicle is moving is down, forward, rearward, or to tilt the seat.
Page 138: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Heated Seats — If Equipped an additional 30 minutes of continuous operation. If This feature heats the front driver and passenger seats. Low-level heating is selected, the system automatically The heaters provide the same heat level for both cushion turns the heater and the indicator light off after 30 min- and back.
Page 139: Fold-Flat Front Passenger Seat
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Front Passenger Seat WARNING! (Continued) To fold the front passenger seat, lift the recliner handle to • Do not place anything on the seat that insulates the full upward position and push the seatback forward against heat, such as a blanket or cushion.
Page 140: Adjusting Active Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Front Passenger Seat Folded Flat Adjusted Head Restraint Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear.
Page 141 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint (on some models, you may need to press the forward and backward. To tilt the head restraint closer to push button).
Page 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! • Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision.
Page 143: Folding Rear Seat
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat WARNING! (Continued) To provide additional storage area, each rear seatback can • Do not place items over the top of the Active Head be folded forward. Pull the strap forward to move the Restraint, such as coats, seat covers or portable seat forward and flat.
Page 144: Reclining Rear Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Rear Seats Folded Flat Reclining Rear Seat Strap Reclining Rear Seat — If Equipped Then push the seatback to a reclined position, approxi- For additional comfort, pull the strap forward just mately 35 degrees maximum, and release the strap. enough to release the seatback latch.
Page 145: To Open And Close The Hood
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. •...
Page 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 8 in (20 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Page 147: Lights
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights and Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever for parking light operation. Turn the multifunction lever The multifunction lever controls the operation of the to the second detent for headlight operation.
Page 148: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light switch is on the multifunction lever.
Page 149: Turn Signals
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals light bulb. If an indicator fails to light when the lever is Move the multifunction lever up or down and the arrows moved, it would suggest that the indicator bulb is on each side of the instrument cluster flash to show defective.
Page 150: Instrument Panel Dimmer
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
Page 151: Map/Reading Lights
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE than the normal lamp operation. The high beam head- lights will come on as Daytime Running Lights (DRL), which is at a lower intensity than the normal high beams. The DRL’s will come on whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except for PARK.
Page 152: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WINDSHIELD WIPERS AND WASHERS Windshield Wiper Operation The windshield wiper/washer control lever is Rotate the end of the lever upward to the LO position for located on the right side of the steering column. low-speed wiper operation.
Page 153: Intermittent Wiper System
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System two wipe cycles after the lever is released, and then Use the intermittent wiper when weather conditions resume the intermittent interval previously selected. make a single wiping cycle, with a variable pause be- If the lever is pulled while in the off position, the wipers tween cycles, desirable.
Page 154: Mist Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Mist Feature CAUTION! Push down on the control lever to activate a single wipe to clear the windshield of road mist or spray from a In cold weather, always turn off the wiper switch and passing vehicle.
Page 155: Tilt Steering Column
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN Push down on the lever to unlock the column. With one This feature allows you to tilt the steering column hand firmly on the steering wheel, move the steering upward or downward. The tilt control lever is located on column up or down as desired.
Page 156: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 ELECTRONIC SPEED CONTROL — IF EQUIPPED NOTE: In order to ensure proper operation, the Elec- When engaged, Electronic Speed Control takes over the tronic Speed Control System has been designed to shut accelerator operation at speeds greater than 25 mph down if multiple Speed Control functions are operated at (40 km/h).
Page 157: To Set A Desired Speed
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pulling the Electronic Speed Control lever toward you CANCEL, normal brak- Leaving the Electronic Speed Control system on ing or pressing the clutch pedal while slowing the vehicle when not in use is dangerous.
Page 158: Manual Transaxle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 RESUME ACCEL position, the set speed will continue to Manual Transaxle increase until the lever is released, then the new set speed Pressing the clutch pedal will disengage the speed con- will be established. trol.
Page 159: To Accelerate For Passing
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate for Passing WARNING! Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
Page 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! • Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse”...
Page 161: Programming Homelink
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink Place the handheld transmitter 1–3 in (3-8 cm) away from the HomeLink button you wish to program while Before You Begin keeping the indicator light in view. If you have not trained any of the HomeLink buttons, erase all channels before you begin training.
Page 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 • After training a HomeLink channel, if the garage This can usually be found where the hanging antenna door does not operate with HomeLink and the ga- wire is attached to the garage door opener motor (it is rage door opener was manufactured after 1995, the NOT the button normally used to open and close the garage door opener may have a rolling code.
Page 163: Gate Operator/Canadian Programming
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING Gate Operator/Canadian Programming button. The name and color of the button may vary by Canadian radio-frequency laws require transmitter sig- manufacturer. nals to “time-out” (or quit) after several seconds of transmission –...
Page 164: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 If you unplugged the device for training, plug it back in 2. Press and hold the desired HomeLink button until at this time. the indicator light begins to flash after 20 seconds. Do not release the button.
Page 165: Troubleshooting Tips
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips 1. This device may not cause harmful interference. If you are having trouble programming HomeLink , here 2. This device must accept any interference that may be are some of the most common solutions: received including interference that may cause undesired •...
Page 166: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located in the reading light. • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Page 167: Opening The Sunroof
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening the Sunroof stop the movement and the sunroof will remain in a partial close condition until the switch is pushed and Manual Mode held forward again. To ensure sunroof is fully closed, To open the sunroof, press and hold the switch rearward press and hold switch until sunroof has completely to full open.
Page 168: Pinch Protect Override
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Pinch Protect Override NOTE: The sunshade cannot be closed if the sunroof is If a known obstruction (ice, debris, etc.) prevents closing, open. press the switch forward and hold for two seconds after Wind Buffeting the reversal occurs.
Page 169: Ignition Off Operation
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition Off Operation The sunroof will also operate up to 45 seconds after the ignition has been turned OFF. The sunroof operation will be canceled if either of the front doors are opened during the 45 second time period.
Page 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: CAUTION! • To ensure proper operation, a MOPAR knob and • Many accessories that can be plugged in draw element must be used. power from the vehicle’s battery, even when not in •...
Page 171: Power Inverter - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED NOTE: To avoid overloading the circuit, check the A 115 Volt (150 Watt) AC power inverter is located on the power ratings on electrical devices prior to using the rear of the center console for added convenience.
Page 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 WARNING! CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers, To avoid serious injury or death: vacuum cleaners, lights, etc.) will degrade the • Do not use a three-prong adaptor. battery even more quickly. Only use these inter- •...
Page 173: Cupholders
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS There are two cupholders behind the center console for Your vehicle is equipped with four cupholders. There are rear passengers. two cupholders located in the front. Rear Cupholders Front Cupholders...
Page 174: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 STORAGE Upper Instrument Panel Storage A storage compartment is located in the center of the Glove Compartment And Storage Bin instrument panel. The glove compartment storage bin is located on the passenger side of the instrument panel. Upper Storage Compartment Glove Compartment Storage Bin...
Page 175: Door Storage - If Equipped
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the storage compartment, push down on the Door Storage — If Equipped button. The lid will open automatically. Push down on The interior door panels are equipped with lower storage the lid to close it. areas.
Page 176: Chill Zone Beverage Cooler Storage Compartment - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 CHILL ZONE BEVERAGE COOLER STORAGE COMPARTMENT — IF EQUIPPED The glove compartment is located on the passenger side of the vehicle. The large glove compartment door swings downward and features two levels of storage. The upper bin functions as the Chill Zone cooled beverage storage compartment (for vehicles equipped with air condition- ing) for storing up to four 20 oz (1 L) bottles or cans.
Page 177: Console Features
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Chill Zone compartment. Depending on ambient tem- CONSOLE FEATURES perature and A/C setting, the compartment can keep The floor console contains both an upper and lower beverages cool. storage compartment. Positioning Slide Control Upper Storage Compartment Vehicles without air conditioning can use that space for storage.
Page 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 To open the upper storage compartment, push inward on To open the lower storage compartment, lift upward on the upper handle to unlatch the upper lid and lift the lid the lower handle to unlatch the lower storage compart- open.
Page 179: Cargo Area Features
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press in on the flashlight to release it. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving.
Page 180: Cargo Cover
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 To operate the flashlight, press the switch once for high, To install the Cargo Cover, insert either end of the cover twice for low, and a third time to return to off. into one of the two notches located in the rear trim panels.
Page 181 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the handle, pull the cover toward you and guide WARNING! the rear cover posts into the guides located on both sides of the rear trim panel. In an accident a cargo cover loose in the vehicle could cause injury.
Page 182: Removable Load Floor
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Removable Load Floor WARNING! The cargo area contains a removable load floor. • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose.
Page 183: Fold Down Speakers - If Equipped
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Down Speakers — If Equipped WARNING! (Continued) When the liftgate is open, the speakers can swing down • Place as much cargo as possible in front of the rear off the trim panel to face rearward, for tailgating and axle.
Page 184: Rear Window Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 REAR WINDOW FEATURES Rotate the center portion of the lever upward to the first detent position for rear wiper operationa. Rear Window Wiper/Washer The rear wiper/washer is controlled by a rotary switch NOTE: The rear wiper operates in an intermittent mode located on the center portion of the control lever.
Page 185: Rear Window Defroster
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Window Defroster CAUTION! The rear window defroster button is located on the bottom right-side of the blower control knob. Failure to follow these cautions can cause damage to Press this button to turn on the rear window defroster the heating elements: and the heated outside mirrors (if equipped).
Page 186 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....189 Average Fuel Economy ....210 Instrument Cluster –...
Page 187 186 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (Disc Mode For CD Clock Setting Procedure — And MP3/WMA Audio Play, DVD-Video) . . . 225 RER/REN Radio ..... 235 Notes On Playing MP3/WMA Files .
Page 188 UNDERSTANDING YOUR INSTRUMENT PANEL 187 Notes On Playing MP3 Files ... . 254 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/REQ/RER/RES/REU/RBZ List Button (CD Mode For MP3 Play) ..257 Radios Only) .
Page 189 188 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Video Radio Operation And Cellular Phones ..275 Entertainment System (VES)™ Climate Controls ..... . 275 (If Equipped) .
Page 190: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 189 INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Lower Glove Compartment/Beverage 9 — ESC OFF Switch – If Equipped Cooler – If Equipped 2 — Instrument Cluster 6 — Climate Controls 10 — Storage Bins 3 —...
Page 191: Instrument Cluster - Base
190 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER – BASE...
Page 192: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 191 INSTRUMENT CLUSTER – PREMIUM...
Page 193: Instrument Cluster Descriptions
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS CAUTION! 1. Temperature Gauge Driving with a hot engine cooling system could The temperature gauge shows engine coolant tempera- damage your vehicle. If temperature gauge reads “H” ture. Any reading within the normal range indicates that pull over and stop the vehicle.
Page 194 UNDERSTANDING YOUR INSTRUMENT PANEL 193 4. Speedometer WARNING! The Speedometer shows the vehicle speed in miles per hour and/or kilometers per hour (mph/kph). A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling 5.
Page 195 194 UNDERSTANDING YOUR INSTRUMENT PANEL If jump starting is required, refer to “Jump Starting and the chime will sound. Refer to “Occupant Restraints” Procedures” in “What To Do In Emergencies”. in “Things To Know Before Starting Your Vehicle” for further information. 7.
Page 196 UNDERSTANDING YOUR INSTRUMENT PANEL 195 Further overheating will cause the temperature gauge to If the light remains on when the parking brake has been pass H , the indicator will continuously flash and a disengaged, and the fluid level is at the full mark on the continuous chime will occur until the engine is allowed master cylinder reservoir, it indicates a possible brake to cool.
Page 197 196 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The light may flash momentarily during sharp Operation of the Brake Warning Light can be checked by cornering maneuvers, which change fluid level condi- turning the ignition switch from the OFF position to the tions.
Page 198 UNDERSTANDING YOUR INSTRUMENT PANEL 197 13. Shift Lever Indicator the repair/service, so that you can be sure that it is The Shift Lever Indicator is self-contained within the properly reset, or that the door jamb sticker is accurate if instrument cluster. It displays the gear position of the the odometer must be reset at zero.
Page 199 198 UNDERSTANDING YOUR INSTRUMENT PANEL “gATE” and “Oil Change Required” will only be dis- HOTOIL played in the EVIC display. For additional information, When this message is displayed there is a engine over- refer to “Electronic Vehicle Information Center (EVIC) — temperature condition.
Page 200 UNDERSTANDING YOUR INSTRUMENT PANEL 199 12 seconds after a single chime has sounded to indicate NOTE: If the indicator message illuminates when you the next scheduled oil change interval. The engine oil start the vehicle, the oil change indicator system did not change indicator system is duty cycle based, which reset.
Page 201 200 UNDERSTANDING YOUR INSTRUMENT PANEL key when the vehicle has completely stopped and the 19. Electronic Stability Control (ESC) OFF Indicator shift lever is placed in the NEUTRAL position. The light Light — If Equipped should turn off. If the light remains lit with the engine This light indicates the Electronic Stability Con- running, your vehicle will usually be drivable;...
Page 202 UNDERSTANDING YOUR INSTRUMENT PANEL 201 21. Vehicle Security Light — If Equipped NOTE: • The “ESC Off Indicator Light” and the “ESC This light will flash at a fast rate for approxi- mately 16 seconds, when the vehicle security Activation/Malfunction Indicator Light” come on mo- alarm is arming, and then will flash slowly mentarily each time the ignition switch is turned ON.
Page 203 202 UNDERSTANDING YOUR INSTRUMENT PANEL by the vehicle manufacturer on the vehicle placard or tire maintain correct tire pressure, even if under-inflation has inflation pressure label. (If your vehicle has tires of a not reached the level to trigger illumination of the TPMS different size than the size indicated on the vehicle low tire pressure telltale.
Page 204 UNDERSTANDING YOUR INSTRUMENT PANEL 203 tires or wheels on your vehicle, to ensure that the 25. Malfunction Indicator Light (MIL) replacement or alternate tires and wheels allow the TPMS The Malfunction Indicator Light (MIL) is part of to continue to function properly. an onboard diagnostic system, called OBD, that monitors engine and automatic transmission con- CAUTION!
Page 205 204 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Anti-Lock Brake (ABS) Light CAUTION! This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition Prolonged driving with the MIL on could cause switch is turned to the ON position and may damage to the engine control system.
Page 206 UNDERSTANDING YOUR INSTRUMENT PANEL 205 27. Transmission Temperature Warning Light — If WARNING! Equipped During sustained high speed driving on hot Continued operation with the Transmission Tem- days, the automatic transmission oil may be- perature Warning Light illuminated could cause the come too hot.
Page 207: Electronic Vehicle Information Center (Evic) - If Equipped
206 UNDERSTANDING YOUR INSTRUMENT PANEL Refer to the Electronic Vehicle Information Center (EVIC) for further information. 30. Electronic Vehicle Information Center (EVIC) Display Button — If Equipped Press the left EVIC button to scroll through sub-menus. Press and hold the reset button for approximately two seconds, to reset the display shown.
Page 208 UNDERSTANDING YOUR INSTRUMENT PANEL 207 • Compass heading • Right Rear Turn Signal Light Out (with a single chime) • Outside temperature display • RKE Battery Low (with a single chime) • Trip computer functions • Personal Settings Not Available – vehicle not in park (automatic transmission) or vehicle is in motion •...
Page 209: Oil Change Required - If Equipped
208 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Change Required 1. Turn the ignition switch to the ON position (do not start the engine). Oil Change Required — If Equipped Your vehicle is equipped with an engine oil change 2. Fully depress the accelerator pedal slowly three times indicator system.
Page 210: Evic Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 209 • Distance To Empty (DTE) EVIC Functions • Elapsed Time • Tire Pressure Monitor (TPM) • Personal Settings To Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed.
Page 211: Compass/Temperature/Audio
210 UNDERSTANDING YOUR INSTRUMENT PANEL Compass/Temperature/Audio Distance To Empty (DTE) Shows the estimated distance that can be travelled with Press and release the EVIC button to display one of eight the fuel remaining in the tank. This estimated distance is compass headings to indicate the direction the vehicle is determined by a weighted average of the instantaneous facing, the outside temperature, and the current radio...
Page 212: Elapsed Time
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Elapsed Time Language Shows the total elapsed time of travel since the last reset When in this display you may select different languages when the ignition switch is in the ACC position. Elapsed for all display nomenclature, including the trip functions. time will increment when the ignition switch is in the ON Pressing the EVIC button while in this display selects or START position.
Page 213 212 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Unlock On Exit Sound Horn with Remote Key Lock When ON is selected all the vehicle’s doors will unlock When ON is selected, a short horn sound will occur when when the driver’s door is opened if the vehicle is stopped the RKE transmitter LOCK button is pressed.
Page 214 UNDERSTANDING YOUR INSTRUMENT PANEL 213 when exiting the vehicle. Press and hold the EVIC button Confirmation of Voice Commands — If Equipped when in this display until 0, 30, 60, or 90 appears to make When ON is selected all voice commands from the your selection.
Page 215 214 UNDERSTANDING YOUR INSTRUMENT PANEL Display Units In Compass Variance The EVIC, odometer, and Uconnect™ gps system units Compass Variance is the difference between Magnetic can be changed between English and Metric. North and Geographic North. To ensure compass accu- racy, the compass variance should be properly set accord- Press and hold the EVIC button when in this display until ing to the variance map for the zone where the vehicle...
Page 216 UNDERSTANDING YOUR INSTRUMENT PANEL 215 press and release (less than one second) the EVIC button several times until “Compass Variance” is highlighted. The “Compass Variance” message and the current vari- ance zone number will be displayed. To change the zone, press and hold (longer than two seconds) the EVIC button to increment the variance one step.
Page 217 216 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Compass Calibration 4. Using a long button press (more than one second) If the compass appears erratic or inaccurate, and the press the EVIC button, this will place the Compass in variance has been properly set, you may wish to manu- calibration mode.
Page 218: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 217 MEDIA CENTER 230 (REQ) — AM/FM STEREO Operating Instructions - Radio Mode RADIO AND 6–DISC CD/DVD CHANGER NOTE: The ignition switch must be in the ON or ACC (MP3/WMA AUX JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
Page 219: Understanding Your Instrument Panel
218 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons If your vehicle is not equipped with or this feature is not Press and release the SEEK buttons to search for the next available on your vehicle, a “Not Equipped With listenable station in AM/FM mode. Press the right switch Uconnect”...
Page 220 UNDERSTANDING YOUR INSTRUMENT PANEL 219 2. Adjust the hours by turning the right side TUNE/ RW/FF SCROLL control knob. Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the 3. After adjusting the hours, press the right side TUNE/ direction of the arrows.
Page 221 220 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third or turning the TUNE/SCROLL control knob within five time and TREBLE will display. Turn the TUNE/SCROLL seconds will allow the program format type to be se- control knob to the right or left to increase or decrease the lected.
Page 222 UNDERSTANDING YOUR INSTRUMENT PANEL 221 16-Digit Character 16-Digit Character Program Type Program Type Display Display Jazz Jazz Top 40 Top 40 News News Weather Weather Nostalgia Nostalga By pressing the SEEK button when the Music Type icon Oldies Oldies is displayed, the radio will be tuned to the next frequency Personality Persnlty station with the same selected Music Type name.
Page 223 222 UNDERSTANDING YOUR INSTRUMENT PANEL • Audio Stream – Repeatedly pressing SELECT will NOTE: Turn the TUNE/SCROLL control knob to scroll through the entries. Push the AUDIO/SELECT button to switch to different audio languages (if supported on select an entry and make changes. the disc) (if equipped).
Page 224 UNDERSTANDING YOUR INSTRUMENT PANEL 223 • VES™ CH1/CH2 - Allows the user to change the Enter the four-digit country code using the TUNE/ mode of either the IR1 or IR2 wireless headphones by SCROLL control knob to scroll up and down to select the pressing the AUDIO/SELECT button (if equipped).
Page 225 224 UNDERSTANDING YOUR INSTRUMENT PANEL Subtitles — If Equipped NOTE: The user will have to set these defaults before Selecting this item allows you to choose between subtitle loading a disc. If changes are made to these settings after Off or On. a disc is loaded, changes will not be effective.
Page 226: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
UNDERSTANDING YOUR INSTRUMENT PANEL 225 You may add a second station to each pushbutton by Operation Instructions - (DISC MODE for CD and repeating the above procedure with this exception: Press MP3/WMA Audio Play, DVD-VIDEO) the SET button twice and SET 2 will show in the display The radio DVD player and many DVD discs are coded by window.
Page 227 226 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton with the corresponding number (1-6) where the LOAD Button —...
Page 228: Notes On Playing Mp3/Wma Files
UNDERSTANDING YOUR INSTRUMENT PANEL 227 SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 229 228 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ • Maximum number of directory levels: 8 WMA tracks on that disc.
Page 230 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Playlist files are not supported. MP3 Pro files are not MPEG Sampling Bit Rate (kbps) supported. Specification Frequency (kHz) 320, 256, 224, Playback of MP3/WMA Files MPEG-1 Audio 192, 160, 128, When a medium containing MP3/WMA data is loaded, 48, 44.1, 32 Layer 3 112, 96, 80, 64,...
Page 231: List Button (Disc Mode For Mp3/Wma Play)
230 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended Press the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc.
Page 232 UNDERSTANDING YOUR INSTRUMENT PANEL 231 is not loud enough, turn the device’s volume up. If the RW/FF (Auxiliary Mode) AUX audio sounds distorted, turn the device’s volume No function. down. SET Button (Auxiliary Mode) SEEK Button (Auxiliary Mode) No function. No function.
Page 233: Media Center 730N/430 (Rer/Ren/Rbz) - Am/Fm Stereo Radio And Cd/Dvd/Hdd/Nav - If Equipped
232 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect™ Multimedia intended for home and other limited viewing uses only, (Satellite Radio) (If Equipped) unless otherwise authorized by Macrovision. Reverse Refer to “Uconnect™ Multimedia (Satellite Radio)”. engineering or disassembly is prohibited. Operating Instructions - Video Entertainment DTS™...
Page 234: Operating Instructions - Voice Command System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 233 The RER radio also contains a Global Positioning System 2. Touch the screen where the time is displayed, the clock (GPS)-based Navigation system. setting menu will appear on the screen. Refer to your Uconnect™ Multimedia REN, RER or RBZ 3.
Page 235 234 UNDERSTANDING YOUR INSTRUMENT PANEL Changing Daylight Savings Time 2. Touch the screen where the time is displayed. The When selected, this feature will display the time of day in clock setting menu will appear on the screen. daylight savings time. Proceed as follows to change the 3.
Page 236: Clock Setting Procedure - Rer/Ren Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 235 want to select, touch the screen where the word “Page” is 4. To move the hour forward, touch the screen where the displayed to view additional time zones in the menu. word “Hour” with the arrow pointing upward is dis- played.
Page 237 236 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where “User Clock” is displayed, the Touch the screen where the words “Show Time if Radio is clock setting menu will appear on the screen. Off” are displayed to change the current setting. 3.
Page 238: Media Center 130 (Res) - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 237 MEDIA CENTER 130 (RES) — AM/FM STEREO Operating Instructions — Radio Mode RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 239 238 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio 4. Adjust the minutes using the right side TUNE/ will remain tuned to the new station until you make SCROLL control knob. Press the TUNE/SCROLL control another selection.
Page 240 UNDERSTANDING YOUR INSTRUMENT PANEL 239 Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones.
Page 241: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
240 UNDERSTANDING YOUR INSTRUMENT PANEL SET 2 in both AM and FM. This allows a total of 12 AM Operation Instructions — CD MODE For CD And and 12 FM stations to be stored into pushbutton memory. MP3 Audio Play The stations stored in SET 2 memory can be selected by NOTE: pressing the pushbutton twice.
Page 242 UNDERSTANDING YOUR INSTRUMENT PANEL 241 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
Page 243: Notes On Playing Mp3 Files
242 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 244 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 245 244 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification Frequency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 246: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Loading times for playback of MP3 files may be affected MP3 player, or cassette player, and utilize the vehicle’s by the following: audio system to amplify the source and play through the vehicle speakers. • Media - CD-RW media may take longer to load than CD-R media Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
Page 247: Media Center 130 (Res/Rsc) - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack) And Sirius Radio
246 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (RES/RSC) — AM/FM Operating Instructions — Radio Mode STEREO RADIO WITH CD PLAYER (MP3 AUX NOTE: The ignition switch must be in the ON or ACC JACK) AND SIRIUS RADIO position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
Page 248 UNDERSTANDING YOUR INSTRUMENT PANEL 247 to seek up and the left switch to seek down. The radio Phone Button Uconnect™ Phone — If Equipped will remain tuned to the new station until you make Press this button to operate the Uconnect™ Phone feature another selection.
Page 249 248 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 250 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob a fifth time Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between the right or left to increase or decrease the bass tones.
Page 251 250 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following 16-Digit Character Program Type format types: Display 16-Digit Character Personality Persnlty Program Type Display Public Public No program type Rhythm and Blues R & B None or undefined Religious Music Rel Musc...
Page 252 UNDERSTANDING YOUR INSTRUMENT PANEL 251 By pressing the SEEK button when the Music Type icon the minutes using the right side TUNE/SCROLL is displayed, the radio will be tuned to the next frequency control knob. Press the TUNE/SCROLL control knob station with the same selected Music Type name.
Page 253: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
252 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE for CD and repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 254 UNDERSTANDING YOUR INSTRUMENT PANEL 253 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
Page 255: Notes On Playing Mp3 Files
254 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 256 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 257 256 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification Frequency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 258: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Loading times for playback of MP3 files may be affected begin playing the files contained in that folder (or the by the following: next folder in sequence if the selection does not contain playable files). •...
Page 259: Uconnect™ Multimedia (Satellite Radio) - If Equipped
258 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode Uconnect™ Multimedia (Satellite Radio) — If The auxiliary (AUX) jack is an audio input jack which Equipped allows the user to plug in a portable device such as an Satellite radio uses direct satellite-to-receiver broadcast- MP3 player or cassette player and utilize the vehicle’s ing technology to provide clear digital sound, coast to audio system to amplify the source and play through the...
Page 260 UNDERSTANDING YOUR INSTRUMENT PANEL 259 information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on .siriuscanada.ca for Canadian residents.
Page 261 260 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 262 UNDERSTANDING YOUR INSTRUMENT PANEL 261 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 263: Universal Consumer Interface (Uci) 0.5 - If Equipped
262 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Every time a preset button is used, a corresponding When you are receiving a channel that you wish to button number will display. commit to pushbutton memory, press the SET button. Buttons 1 - 6 The symbol SET 1 will now show in the display window.
Page 264: Connecting The Ipod
UNDERSTANDING YOUR INSTRUMENT PANEL 263 This feature allows an iPod to be plugged into the Connecting The iPod vehicle’s sound system through a 16–pin connector, using Use the provided connection cable to connect an iPod to the provided interface cable. the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles).
Page 265: Using This Feature
264 UNDERSTANDING YOUR INSTRUMENT PANEL Using This Feature Play Mode By using the provided connection cable to connect an When switched to UCI mode, the iPod automatically iPod to the vehicle’s UCI 16–pin connector port: starts Play mode. In Play mode, use the following buttons on the radio faceplate to control the iPod and display •...
Page 266 UNDERSTANDING YOUR INSTRUMENT PANEL 265 • Jump backward in the current track by pressing and • While a track is playing, press the INFO button to see holding the << RW button. Holding the << RW the associated metadata (artist, track title, album, etc.) button long enough will jump to the beginning of for that track.
Page 267: List Or Browse Mode
266 UNDERSTANDING YOUR INSTRUMENT PANEL • RND button (available on sales code RES radio only): fast will scroll through the list faster. During fast Pressing this button toggles between Shuffle ON and scroll, a slight delay in updating the information on Shuffle OFF modes for the iPod .
Page 268 UNDERSTANDING YOUR INSTRUMENT PANEL 267 • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on • Leaving the iPod (or any supported device) any- the second line. where in the vehicle in extreme heat or cold can •...
Page 269: Understanding Your Instrument Panel
268 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect™ Multimedia (SATELLITE RADIO) — IF information, call the toll-free number 888-539-7474, or EQUIPPED (REN/REQ/RER/RES/REU/RBZ visit the Sirius web site at www.sirius.com, or at www- .siriuscanada.ca for Canadian residents. RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcast- Electronic Serial Number/Sirius Identification ing technology to provide clear digital sound, coast to Number (ESN/SID)
Page 270: Selecting Uconnect™ Multimedia (Satellite) Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Sirius ID number will display. The Sirius ID number Selecting Uconnect™ Multimedia (Satellite) Mode display will time out in two minutes. Press any button on Press the SAT button until SAT appears in the display. A the radio to exit this screen.
Page 271: Operating Instructions - Uconnect™ Multimedia (Satellite) Mode
270 UNDERSTANDING YOUR INSTRUMENT PANEL • Dense tree coverage may interrupt reception in the SCAN Button (When Equipped) form of short audio mutes. Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- •...
Page 272 UNDERSTANDING YOUR INSTRUMENT PANEL 271 RW/FF By pressing the SEEK button when the Music Type Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next causes the tuner to search for the next channel in the channel with the same selected Music Type name.
Page 273: Operating Instructions - Uconnect™ Phone (If Equipped)
272 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button the SET button twice and SET 2 will show in the display Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This following items: allows a total of 12 Satellite channels to be stored into pushbutton memory.
Page 274 UNDERSTANDING YOUR INSTRUMENT PANEL 273 Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “Video Entertainment System (VES)™ Guide.” REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches.
Page 275 274 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the right-hand control beginning of the current track or to the beginning of the will switch modes to Radio or CD. previous track, if it is within one second after the current track begins to play.
Page 276 UNDERSTANDING YOUR INSTRUMENT PANEL 275 3. Do not apply paper or tape to the disc; avoid scratch- RADIO OPERATION AND CELLULAR PHONES ing the disc. Under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from 4.
Page 277 276 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating and Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 278 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Temperature Control Mode Control (Air Direction) Rotate this control to regulate the tem- Rotate this control to choose from sev- perature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the con-...
Page 279 278 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For all settings except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side lower outlets. The warmer air flows to the floor outlets. window demist outlets.
Page 280 UNDERSTANDING YOUR INSTRUMENT PANEL 279 NOTE: Air Conditioning Control • Continuous use of the recirculation mode may make Press this button to engage the Air the inside air stuffy and window fogging may occur. Conditioning. A light will illuminate Extended use of this mode is not recommended. when the Air Conditioning System is engaged.
Page 281 280 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If 1. Turn the Mode Control knob (on the right) and the Equipped Blower Control knob (on the left) to AUTO. The Automatic Temperature Control system automati- NOTE: The AUTO position performs best for front seat cally maintains the climate in the cabin of the vehicle at occupants only.
Page 282 UNDERSTANDING YOUR INSTRUMENT PANEL 281 The recommended setting for maximum comfort for the Blower Control average person is 72°F (22°C); however, this may vary. For full automatic operation or for automatic blower operation turn the NOTE: knob to AUTO position. In manual •...
Page 283 282 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 284 UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 285 284 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 286 UNDERSTANDING YOUR INSTRUMENT PANEL 285 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifreeze coolant Mode by pressing the Recirculation button. However, to provide proper corrosion protection and to protect under certain conditions, while in Automatic Mode, against engine overheating.
Page 287 286 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 288 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Control Setting Suggestions for Various Weather Conditions...
Page 290: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ....293 Manual Transmission — If Equipped ..296 Manual Transmission –...
Page 291 290 STARTING AND OPERATING AutoStick — If Equipped ....302 Anti-Lock Brake System (ABS) ... 311 Operation .
Page 292 STARTING AND OPERATING 291 Tires — General Information ... . . 330 Tire Pressure Monitoring System (TPMS) ..339 Tire Pressure ..... . . 330 Base System .
Page 293 292 STARTING AND OPERATING Fuel Filler Cap (Gas Cap) ....353 Trailer And Tongue Weight ... . . 362 Loose Fuel Filler Cap Message .
Page 294: Starting Procedures
STARTING AND OPERATING 293 STARTING PROCEDURES NOTE: • The engine will not start unless the clutch pedal is Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. pressed to the floor. •...
Page 295: Extreme Cold Weather
294 STARTING AND OPERATING and release when the engine starts. If the engine fails to Tip Start Feature start within 15 seconds, turn the ignition switch to the Do not press the accelerator. Turn the ignition switch to OFF position, wait 10 to 15 seconds, then repeat the the START position and release it as soon as the starter “Normal Starting”...
Page 296: After Starting
STARTING AND OPERATING 295 for no more than 15 seconds. This should clear any excess After Starting fuel in case the engine is flooded. Leave the ignition key The idle speed will automatically decrease as the engine in the ON position, release the accelerator pedal and warms up.
Page 297: Manual Transmission - If Equipped
296 STARTING AND OPERATING MANUAL TRANSMISSION — IF EQUIPPED Five–Speed Manual Transmission WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline.
Page 298: Recommended Shift Speeds
STARTING AND OPERATING 297 For most city driving, you will find it easier to use only Manual Transmission Recommended Shift Speeds the lower gears. For steady highway driving with light Units in mph (km/h) accelerations, fifth gear is recommended. Accel- Engine eration 1 to 2...
Page 299: Automatic Transmission - If Equipped
298 STARTING AND OPERATING To maintain a safe speed and prolong brake life, shift CAUTION! down to second or first gear when descending a steep grade. Damage to the transmission may occur if the follow- ing precautions are not observed: When turning a corner or driving up a steep grade, •...
Page 300: Brake/Transmission Interlock System
STARTING AND OPERATING 299 WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
Page 301: Automatic Transmission Ignition Interlock System
300 STARTING AND OPERATING NOTE: If a malfunction occurs, the transmission will Gear Ranges not shift out of PARK. Battery power is required to DO NOT race the engine when shifting from PARK or release the brake/transmission interlock system. There is NEUTRAL position into another gear range.
Page 302 STARTING AND OPERATING 301 WARNING! WARNING! (Continued) • Never leave children alone in a vehicle. Leaving • Unintended movement of a vehicle could injure unattended children in a vehicle is dangerous for a those in and near the vehicle. As with all vehicles, number of reasons.
Page 303: Autostick - If Equipped
302 STARTING AND OPERATING AUTOSTICK — IF EQUIPPED CAUTION! AutoStick is a driver-interactive transmission that offers six manual ratio changes to provide you with more Before moving the shift lever out of PARK, you must control. AutoStick allows you to maximize engine brak- turn the ignition from LOCK to ON so the steering ing, eliminate undesirable upshifts and downshifts, and wheel and shift lever are released.
Page 304: General Information
STARTING AND OPERATING 303 AutoStick operation is activated in the DRIVE position General Information by moving the shift lever side-to-side. Moving the shift • If a ratio other than first is selected and the vehicle is lever to the (+) side will activate AutoStick and shift up brought to a stop, the transmission control logic will to the next higher manual ratio, unless you are already automatically select the first gear ratio.
Page 305: Driving On Slippery Surfaces
304 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 306: Driving Through Water
STARTING AND OPERATING 305 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 307 306 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
Page 308: Power Steering
STARTING AND OPERATING 307 POWER STEERING system. This noise should be considered normal, and it The standard power steering system will give you good does not in any way damage the steering system. vehicle response and increased ease of maneuverability WARNING! in tight spaces.
Page 309: Parking Brake
308 STARTING AND OPERATING checked if a leak is suspected, abnormal noises are If necessary, add fluid to restore to the proper indicated apparent, and/or the system is not functioning as antici- level. With a clean cloth, wipe any spilled fluid from all pated.
Page 310 STARTING AND OPERATING 309 NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 311: Brake System
310 STARTING AND OPERATING WARNING! CAUTION! • Never leave children alone in a vehicle. Leaving If the “Brake Warning Light” remains on with the unattended children in a vehicle is dangerous for a parking brake released, a brake system malfunction number of reasons.
Page 312: Anti-Lock Brake System (Abs)
STARTING AND OPERATING 311 WARNING! WARNING! Riding the brakes can lead to brake failure and Driving a vehicle with the “Brake Warning Light” on possibly an accident. Driving with your foot resting is dangerous. A significant decrease in braking per- or riding on the brake pedal can result in abnormally formance or vehicle stability during braking may high brake temperatures, excessive lining wear, and...
Page 313 312 STARTING AND OPERATING WARNING! WARNING! (Continued) • The capabilities of an ABS-equipped vehicle must • Pumping of the anti-lock brakes will diminish never be exploited in a reckless or dangerous their effectiveness and may lead to an accident. manner which could jeopardize the user’s safety Pumping makes the stopping distance longer.
Page 314 STARTING AND OPERATING 313 If the “ABS Warning Light” is on, the brake system ABS is activated during braking under certain road or should be serviced as soon as possible to restore the stopping conditions. ABS-inducing conditions can in- benefits of anti-lock brakes. If the “ABS Warning Light” clude ice, snow, gravel, bumps, railroad tracks, loose does not come on when the ignition switch is turned to debris, or panic stops.
Page 315: Electronic Brake Control System
314 STARTING AND OPERATING (HSA), and Electronic Stability Control (ESC). All sys- WARNING! tems work together to enhance vehicle stability and control in various driving conditions and are commonly The Anti-Lock Brake System (ABS) contains sophis- referred to as ESC. ticated electronic equipment that may be susceptible to interference caused by improperly installed or Anti-Lock Brake System (ABS)
Page 316: Traction Control System (Tcs)
STARTING AND OPERATING 315 Anti-Lock Brake System (ABS). Applying the brakes very WARNING! (Continued) quickly results in the best BAS assistance. To receive the • The BAS cannot prevent accidents, including benefit of the system, you must apply continuous brak- those resulting from excessive speed in turns, ing pressure during the stopping sequence (do not driving on very slippery surfaces, or hydroplan-...
Page 317: Hill Start Assist (Hsa) - Manual Transmission Only
316 STARTING AND OPERATING spinning faster than the other, the system will apply the HSA Activation Criteria brake of the spinning wheel. This will allow more engine The following criteria must be met in order for HSA to torque to be applied to the wheel that is not spinning. activate: This feature remains active even if TCS and ESC are in •...
Page 318 STARTING AND OPERATING 317 Disabling/Enabling HSA 5. Release the clutch pedal. If you wish to turn on or off the HSA system, it can be 6. Rotate the steering wheel one-half turn to the left. done using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC).
Page 319: Electronic Stability Control (Esc)
318 STARTING AND OPERATING Electronic Stability Control (ESC) ESC Off Indicator Light The “ESC Off Indicator Light” (located in the This system enhances directional control and stability of instrument cluster) starts to flash as soon as the the vehicle under various driving conditions. ESC cor- tires lose traction and the ESC system becomes rects for over-steering or under-steering of the vehicle by active.
Page 320 STARTING AND OPERATING 319 several ignition cycles, and the vehicle has been driven WARNING! (Continued) several miles (kilometers) at speeds greater than 30 mph • ESC cannot prevent accidents, including those (48 km/h), see your authorized dealer as soon as possible resulting from excessive speed in turns, driving on to have the problem diagnosed and corrected.
Page 321 320 STARTING AND OPERATING Full On NOTE: To improve the vehicle’s traction when driving This is the normal operating mode for ESC. Whenever with snow chains, or starting off in deep snow, sand or the vehicle is started the ESC system will be in this “On” gravel, it may be desirable to switch to the “Partial Off”...
Page 322: Tire Safety Information
STARTING AND OPERATING 321 TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 323 322 STARTING AND OPERATING • High flotation tire sizing is based on U.S. design Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- standards and it begins with the tire diameter molded tion.
Page 324 STARTING AND OPERATING 323 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 325: Tire Identification Number (Tin)
324 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 326: Tire Terminology And Definitions
STARTING AND OPERATING 325 Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 327: Tire Loading And Tire Pressure
326 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 328 STARTING AND OPERATING 327 Loading occupants and cargo should never exceed XXX lbs or The vehicle maximum load on the tire must not exceed XXX kg” on the Tire and Loading Information placard. the load carrying capacity of the tire on your vehicle. You The combined weight of occupants, cargo/luggage and will not exceed the tire’s load carrying capacity if you trailer tongue weight (if applicable) should never exceed...
Page 329 328 STARTING AND OPERATING 4. The resulting figure equals the available amount of 6. If your vehicle will be towing a trailer, load from your cargo and luggage load capacity. For example, if “XXX” trailer will be transferred to your vehicle. Consult this amount equals 1,400 lbs (635 kg) and there will be five manual to determine how this reduces the available 150 lb (68 kg) passengers in your vehicle, the amount of...
Page 330 STARTING AND OPERATING 329...
Page 331: Tires - General Information
330 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause accidents. recommended load capacity for your vehicle.
Page 332: Tire Inflation Pressures
STARTING AND OPERATING 331 Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side “B” Pillar. hicle to the other can cause the vehicle to drift to Some vehicles may have Supplemental Tire Pressure the right or left.
Page 333 332 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the Winter.
Page 334: Tire Pressures For High Speed Operation
STARTING AND OPERATING 333 Tire Pressures for High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 335: Tire Spinning
334 STARTING AND OPERATING WARNING! CAUTION! • Temporary use spare tires are for emergency use Because of the reduced ground clearance, do not take only. With these tires, do not drive more than your vehicle through an automatic car wash with the 50 mph (80 km/h).
Page 336: Tread Wear Indicators
STARTING AND OPERATING 335 WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the...
Page 337: Life Of Tire
336 STARTING AND OPERATING Life of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including, but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
Page 338 STARTING AND OPERATING 337 WARNING! WARNING! (Continued) • Never use a tire with a smaller load index or • Do not use a tire, wheel size or rating other than capacity other than what was originally equipped that specified for your vehicle. Some combinations on your vehicle.
Page 339: Tire Chains
338 STARTING AND OPERATING TIRE CHAINS Snow tires generally have lower speed ratings than what Due to limited clearance, tire chains are not recom- was originally equipped with your vehicle and should mended. not be operated at sustained speeds over 75 mph (120 km/h).
Page 340: Tire Pressure Monitoring System (Tpms)
STARTING AND OPERATING 339 Refer to “Maintenance Schedule” for the proper mainte- TIRE PRESSURE MONITORING SYSTEM (TPMS) nance intervals. More frequent rotation is permissible if The Tire Pressure Monitor System (TPMS) will warn the desired. The reasons for any rapid or unusual wear driver of a low tire pressure based on the vehicle recom- should be corrected prior to rotation being performed.
Page 341 340 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low-pressure warning cold (parked for more than three hours) placard pressure limit for any reason, including low temperature effects, or of 30 psi (207 kPa).
Page 342 STARTING AND OPERATING 341 NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance or to provide warning of a tire failure or condition. equipment tires and wheels. TPMS pressures and warnings have been established for the tire size •...
Page 343: Base System
342 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, • Four Tire Pressure Monitoring Sensors and the TPMS will monitor the actual tire pressure in • Tire Pressure Monitoring Telltale Light the tire. Tire Pressure Monitoring Low Pressure Warnings Base System The Tire Pressure Monitoring Telltale Light will illumi- This is the TPMS warning indicator located in the...
Page 344 STARTING AND OPERATING 343 fault is detected. The system fault will also sound a 1. The compact spare tire does not have a tire pressure chime. If the ignition key is cycled, this sequence will monitoring sensor. Therefore, the TPMS will not monitor repeat providing the system fault still exists.
Page 345: Premium System - If Equipped
344 STARTING AND OPERATING 5. Once you repair or replace the original road tire and NOTE: It is particularly important for you to check the reinstall it on the vehicle in place of the compact spare tire pressure in all of your tires regularly and to maintain tire, the TPMS will update automatically and the Tire the proper pressure.
Page 346 STARTING AND OPERATING 345 Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low.
Page 347 346 STARTING AND OPERATING graphic display of the pressure value(s) will stop flash- ing, and the Tire Pressure Monitoring Light will extin- guish once the updated tire pressure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information.
Page 348 STARTING AND OPERATING 347 will be displayed instead of dashes. A system fault can 2. If you install the compact spare tire in place of a road occur with any of the following scenarios: tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will 1.
Page 349: General Information
348 STARTING AND OPERATING 5. Once you repair or replace the original road tire and The tire pressure sensors are covered under one of the reinstall it on the vehicle in place of the compact spare following licenses: tire, the TPMS will update automatically and the Tire Pressure Monitoring Telltale Light will turn OFF, as long United States .
Page 350: Reformulated Gasoline
STARTING AND OPERATING 349 Poor quality gasoline can cause problems such as hard Gasoline/Oxygenate Blends starting, stalling and hesitations. If you experience these Some fuel suppliers blend unleaded gasoline with oxy- symptoms, try another brand of gasoline (with the ap- genates such as 10% ethanol, MTBE, and ETBE.
Page 351: E85 Usage In Non-Flex Fuel Vehicles
350 STARTING AND OPERATING • disconnect and reconnect the battery to reset the E85 Usage In Non-Flex Fuel Vehicles Non-FFV vehicles are compatible with gasoline contain- engine controller memory ing 10% ethanol (E10). Gasoline with higher ethanol More extensive repairs will be required for prolonged content may void the vehicle’s warranty.
Page 352: Materials Added To Fuel
STARTING AND OPERATING 351 It is even more important to look for gasoline without CAUTION! (Continued) MMT in Canada, because MMT can be used at levels • The use of leaded gas is prohibited by Federal law. higher than those allowed in the United States. Using leaded gasoline can impair engine perfor- MMT is prohibited in Federal and California reformu- mance and damage the emission control system.
Page 353: Carbon Monoxide Warnings
352 STARTING AND OPERATING NOTE: Intentional tampering with emissions control WARNING! (Continued) systems can result in civil penalties being assessed • Do not inhale exhaust gases. They contain carbon against you. monoxide, a colorless and odorless gas which can Carbon Monoxide Warnings kill.
Page 354: Adding Fuel
STARTING AND OPERATING 353 ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door.
Page 355 354 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Never add fuel when the engine is running. This is • Damage to the fuel system or emission control in violation of most state and Federal fire regula- system could result from using an improper fuel tions and may cause the MIL to turn on.
Page 356: Loose Fuel Filler Cap Message
STARTING AND OPERATING 355 Loose Fuel Filler Cap Message Vehicle Certification Label If the vehicle diagnostic system determines that the fuel Your vehicle has a Vehicle Certification Label attached to filler cap is loose or improperly installed, a “gASCAP” the driver’s door B-Pillar. message will be displayed in the Odometer/Trip Odom- The label contains the following information: eter in the instrument cluster.
Page 357 356 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) Curb Weight The GVWR is the total allowable weight of your vehicle. The curb weight of a vehicle is defined as the total weight This includes driver, passengers, and cargo. The total of the vehicle with all fluids, including vehicle fuel, at full load must be limited so that you do not exceed the capacity conditions, and with no occupants or cargo...
Page 358: Trailer Towing
STARTING AND OPERATING 357 Overloading can cause potential safety hazards and TRAILER TOWING shorten useful service life. Heavier suspension compo- In this section, you will find safety tips and information nents do not necessarily increase the vehicle’s GVWR. on limits to the type of towing you can reasonably do with your vehicle.
Page 359 358 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Gross Axle Weight Rating (GAWR) Certification Label” in “Starting and Operating” for The GAWR is the maximum capacity of the front and rear further information. axles. Distribute the load over the front and rear axles evenly.
Page 360 STARTING AND OPERATING 359 Frontal Area Weight-Distributing Hitch The frontal area is the maximum height multiplied by the A weight-distributing hitch system works by applying maximum width of the front of a trailer. leverage through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight Trailer Sway Control to the tow vehicle’s front axle and the trailer axle(s).
Page 361: Installing A Trailer Hitch
360 STARTING AND OPERATING Installing A Trailer Hitch Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Maximum GTW towable NOTE: If you install a trailer hitch after you purchase for your given drivetrain. the vehicle, you must install a MOPAR or equivalent Trailer Hitch Classification Definitions spare tire hold down kit.
Page 362: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 361 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg)
Page 363: Trailer And Tongue Weight
362 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the GTW on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely from side-to-side which will cause loss of con- trol of vehicle and trailer.
Page 364: Towing Requirements
STARTING AND OPERATING 363 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional • Do not tow a trailer at all during the first 500 miles factory-installed options, or dealer-installed options, must be considered as part of the total load on your (805 km) the new vehicle is driven.
Page 365 364 STARTING AND OPERATING WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to an injury accident. vehicle and trailer. Always connect the chains to Follow these guidelines to make your trailer towing the frame or hook retainers of the vehicle hitch.
Page 366 STARTING AND OPERATING 365 − Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 2. GTW Information” in “Starting and Operating” for the 3. GAWR proper inspection procedure. 4.
Page 367 366 STARTING AND OPERATING actuated brakes. When towing a trailer equipped with WARNING! a hydraulic surge actuated brake system, an electronic • Do not connect trailer brakes to your vehicle’s brake controller is not required. hydraulic brake lines. It can overload your brake −...
Page 368 STARTING AND OPERATING 367 Towing Requirements – Trailer Lights and Wiring Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four-pin and seven-pin wiring harness.
Page 369: Towing Tips
368 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage.
Page 370: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 369 Cooling System RECREATIONAL TOWING (BEHIND To reduce potential for engine and transmission over- MOTORHOME, ETC.) heating, take the following actions: Towing This Vehicle Behind Another Vehicle (Flat − City Driving Towing With All Four Wheels On The Ground) When stopped for short periods of time, shift the trans- Recreational Manual Trans-...
Page 371 370 STARTING AND OPERATING NOTE: Vehicles equipped with manual transmissions may be recreationally towed (flat towed) at any legal highway speed, for any distance, if the manual transmis- sion is in NEUTRAL and the ignition key is in the ACC position.
Page 372: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....372 Jump-Starting Procedures ....380 If Your Engine Overheats .
Page 373: Hazard Warning Flasher
372 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
Page 374: Automatic Transaxle Overheating
WHAT TO DO IN EMERGENCIES 373 CAUTION! WARNING! Driving with a hot cooling system could damage You or others can be badly burned by hot engine your vehicle. If the pointer rises to the H (red) mark, coolant (antifreeze) or steam from your radiator. If the instrument cluster will sound a chime.
Page 375: Jacking And Tire Changing
374 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
Page 376: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 375 Preparations For Jacking 4. Turn OFF the ignition. 1. Park the vehicle on a firm level surface, avoiding ice or 5. Turn on the Hazard Warning flasher. slippery areas. 6. Block both the front and rear of the wheel diagonally opposite the jacking WARNING! position.
Page 377: Jacking Instructions
376 WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. help prevent personal injury or damage to your •...
Page 378 WHAT TO DO IN EMERGENCIES 377 Jack Warning Label 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly.
Page 379 378 WHAT TO DO IN EMERGENCIES 3. There are two front jacking locations and two rear WARNING! jacking locations on each side of the body. The front locations are outlined by two triangular cutouts, the rear Raising the vehicle higher than necessary can make ones by two rectangular cutouts.
Page 380 WHAT TO DO IN EMERGENCIES 379 CAUTION! WARNING! Be sure to mount the spare tire with the valve stem To avoid possible personal injury, handle the wheel facing outward. The vehicle could be damaged if the covers with care to avoid contact with any sharp spare tire is mounted incorrectly.
Page 381: Jump-Starting Procedures
380 WHAT TO DO IN EMERGENCIES 9. Remove the wheel blocks and lower the jack until it is 11. Check the tire pressure as soon as possible. Correct free. Reassemble the lug wrench to the jack assembly and the tire pressure as required. stow it in the spare tire area.
Page 382: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 381 WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations for Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct.
Page 383 382 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
Page 384: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 383 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 385 384 WHAT TO DO IN EMERGENCIES 8. Disconnect the opposite end of the positive (+) jumper WARNING! cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the 9. Disconnect the positive (+) end of the jumper cable discharged battery.
Page 386: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 385 FREEING A STUCK VEHICLE CAUTION! (Continued) If your vehicle becomes stuck in mud, sand or snow, it • Revving the engine or spinning the wheels too fast can often be moved by a rocking motion. Turn your may lead to transmission overheating and failure.
Page 387: Towing A Disabled Vehicle
386 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Manual Transaxle • Front Wheel Drive (FWD) or All Wheel Drive (AWD) With Ignition Key vehicles can be flat towed (all four wheels on the Automatic Transaxle ground) with the transmission in NEUTRAL. •...
Page 388: Without The Ignition Key
WHAT TO DO IN EMERGENCIES 387 Without The Ignition Key CAUTION! Special care must be taken when the vehicle is towed • If the vehicle being towed requires steering, the with the ignition in the LOCK position. A dolly should be used under the front wheels if the rear wheels are raised.
Page 390: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 2.0L ... . . 391 Engine Oil ......397 Engine Compartment —...
Page 391 390 MAINTAINING YOUR VEHICLE Cooling System ..... 407 Bulb Replacement ..... 427 Brake System .
Page 392: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 391 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Integrated Power Module 2 — Power Steering Fluid Reservoir 7 — Battery (Under Cover) 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Air Cleaner Filter 9 —...
Page 393: Engine Compartment - 2.4L
392 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Battery (Under Cover) 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 9 —...
Page 394: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 393 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 395: Emissions Inspection And Maintenance Programs
394 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the serviced, recently had a dead battery or a battery replace- vehicle is started. This might indicate a damaged cap. If ment. If the OBD II system should be determined not the problem is detected twice in a row, the system will ready for the I/M test, your vehicle may fail the test.
Page 396: Replacement Parts
MAINTAINING YOUR VEHICLE 395 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Page 397: Maintenance Procedures
396 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES attempting any procedure yourself. The pages that follow contain the required maintenance services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
Page 398: Engine Oil
MAINTAINING YOUR VEHICLE 397 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 399 398 MAINTAINING YOUR VEHICLE manufacturer recommends engine oils that are API Cer- CAUTION! tified and meet the requirements of Chrysler Material Standard MS-6395. Do not overfill the engine. Overfilling the engine as indicated by the range markings, as described above, American Petroleum Institute (API) Engine Oil on the engine oil dipstick will cause oil aeration, Identification Symbol...
Page 400 MAINTAINING YOUR VEHICLE 399 Engine Oil Viscosity (SAE Grade) Synthetic Engine Oils SAE 5W-20 engine oil is recommended for all operating You may use synthetic engine oils provided the recom- temperatures. This engine oil improves low temperature mended oil quality requirements are met, and the recom- starting and vehicle fuel economy.
Page 401: Engine Oil Filter
400 MAINTAINING YOUR VEHICLE station, or governmental agency for advice on how and WARNING! where used oil and oil filters can be safely discarded in your area. The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine Engine Oil Filter backfire.
Page 402: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 401 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 403: Air Conditioner Maintenance
402 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
Page 404: Body Lubrication
MAINTAINING YOUR VEHICLE 403 Protection Agency and is an ozone-saving product. How- WARNING! ever, the manufacturer recommends that air conditioning • Use only refrigerants and compressor lubricants service be performed by authorized dealers or other service facilities using recovery and recycling equipment. approved by the manufacturer for your air condi- tioning system.
Page 405: Windshield Wiper Blades
404 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. from a dry windshield. Avoid using the wiper blades to When performing other underhood services, the hood remove frost or ice from the windshield. Make sure that latch, release mechanism and safety catch should be they are not frozen to the glass before turning them on to cleaned and lubricated.
Page 406: Exhaust System
MAINTAINING YOUR VEHICLE 405 should be checked at regular intervals. Fill the reservoir have an authorized technician inspect the complete ex- with windshield washer solvent (not engine coolant haust system and adjacent body areas for broken, dam- (antifreeze). aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep WARNING! into the passenger compartment.
Page 407 406 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • A hot exhaust system can start a fire if you park • Damage to the catalytic converter can result if your over materials that can burn. Such materials might vehicle is not kept in proper operating condition. be grass or leaves coming into contact with your In the event of engine malfunction, particularly exhaust system.
Page 408: Cooling System
MAINTAINING YOUR VEHICLE 407 • Do not idle the engine with any spark plug wires NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed disconnected or removed, such as when diagnostic against you. testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
Page 409 408 MAINTAINING YOUR VEHICLE Coolant Checks Cooling System – Drain, Flush and Refill Check engine coolant (antifreeze) protection every Refer to “Maintenance Schedule” for the proper mainte- 12 months (before the onset of freezing weather, where nance intervals. applicable). If the engine coolant (antifreeze) is dirty or If the engine coolant (antifreeze) is dirty or contains a rusty in appearance, the system should be drained, considerable amount of sediment, clean and flush with a...
Page 410 MAINTAINING YOUR VEHICLE 409 CAUTION! CAUTION! (Continued) • This vehicle has not been designed for use with • Mixing of engine coolant (antifreeze) other than Propylene Glycol based engine coolant (anti- specified Hybrid Organic Additive Technology freeze). Use of Propylene Glycol based engine (HOAT) engine coolant (antifreeze), may result in coolant (antifreeze) is not recommended.
Page 411 410 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to main- Organic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing ac- (antifreeze). When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated.
Page 412 MAINTAINING YOUR VEHICLE 411 rules for your community. To prevent ingestion by ani- WARNING! mals or children do not store ethylene glycol-based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 413 412 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. the coolant recovery bottle. If engine coolant (anti- freeze) needs to be added, the contents of the coolant When additional engine coolant (antifreeze) is needed to recovery bottle must also be protected against freez-...
Page 414: Brake System
MAINTAINING YOUR VEHICLE 413 • Keep the front of the radiator clean. If your vehicle is WARNING! equipped with air conditioning, keep the front of the condenser clean. Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting •...
Page 415 414 MAINTAINING YOUR VEHICLE when the pads are replaced. However, low fluid level WARNING! may be caused by a leak and a checkup may be needed. • Use only manufacturer’s recommended brake NOTE: If your vehicle is equipped with a manual fluid.
Page 416 MAINTAINING YOUR VEHICLE 415 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 417: Automatic Transmission (Cvt) - If Equipped
416 MAINTAINING YOUR VEHICLE Automatic Transmission (CVT) – If Equipped CAUTION! (Continued) Selection Of Lubricant • Using a transmission fluid other than the manu- It is important that the proper lubricant is used in the facturer’s recommended fluid will cause belt slip transmission to assure optimum transmission perfor- and result in a complete transmission failure! mance.
Page 418: Manual Transmission - If Equipped
MAINTAINING YOUR VEHICLE 417 (CVTF+4 ). CVTF+4 is an engineered product and its the vehicle. Fluid changes are not necessary unless lubri- performance may be impaired by supplemental cant has become contaminated with water. additives. NOTE: If contaminated with water, the fluid should be Manual Transmission –...
Page 419 418 MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your ve- resistance built into your vehicle. hicle in the shade using MOPAR Car Wash or a mild What Causes Corrosion? car wash soap, and rinse the panels completely with Corrosion is the result of deterioration or removal of...
Page 420 MAINTAINING YOUR VEHICLE 419 • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 421 420 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR Total Clean or a mild Wheel And Wheel Trim Care All wheels and wheel trim, especially aluminum and soap solution to a clean, damp cloth and remove the chrome-plated wheels, should be cleaned regularly with stain.
Page 422 MAINTAINING YOUR VEHICLE 421 Your leather upholstery can be best preserved by regular Cleaning Headlights cleaning with a damp, soft cloth. Small particles of dirt Your vehicle has plastic headlights that are lighter and can act as an abrasive and damage the leather upholstery less susceptible to stone breakage than glass headlights.
Page 423 422 MAINTAINING YOUR VEHICLE not use scrapers or other sharp instruments which may Cleaning Plastic Instrument Cluster Lenses scratch the elements. When cleaning the rearview mirror, The lenses in front of the instruments in this vehicle are spray cleaner on the towel or rag that you are using. Do molded in clear plastic.
Page 424: Fuses
MAINTAINING YOUR VEHICLE 423 Replace the seat belts if they appear frayed or worn or if the buckles do not work properly. Dry with a soft cloth. FUSES Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine compartment near the air cleaner assembly.
Page 425 424 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 10 Amp CHMSL Brake Switch 20 Amp CCN Power Locks/ Feed Yellow Interior Lighting 10 Amp Ignition Switch Feed/ 15 Amp Power Outlet Lt Blue 20 Amp Trailer Tow –...
Page 426 MAINTAINING YOUR VEHICLE 425 Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 10 Amp IOD Feed Mod-Wcm 10 Amp Heated Mirror – If Equipped 40 Amp ASD Relay Contact 15 Amp ENG ASD Relay Feed Green PWR Feed Lt Blue 20 Amp...
Page 427 426 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description CAUTION! Fuse Fuse • When installing the IPM cover, it is important to 10 Amp ABS MOD/J1962 ensure the cover is properly positioned and fully Conn/PCM latched. Failure to do so may allow water to get 30 Amp ABS Valve Feed into the IPM, and possibly result in an electrical...
Page 428: Vehicle Storage
MAINTAINING YOUR VEHICLE 427 VEHICLE STORAGE LIGHTS BULBS – Exterior Bulb Number If you will not be using your vehicle for more than Low Beam/High Beam Headlamp ... . H13 21 days, you may want to take steps to preserve your Front Park/Turn Signal/Side Marker Lamp .
Page 429: Fog Lamps
428 MAINTAINING YOUR VEHICLE 1. Disconnect and isolate the negative battery cable. 1. Disconnect and isolate the negative battery cable. 2. Working in the appropriate wheel well, loosen the 2. Remove the front wheel and tire on the same side of front of the splash shield, but do not fully remove it.
Page 430: Rear Tail, Turn Signal, And Backup Lamps
MAINTAINING YOUR VEHICLE 429 7. From behind the front fascia disconnect the engine compartment wire harness connector from the front fog lamp bulb connector receptacle. 8. Firmly grasp the bulb by the two latch features and squeeze them together to unlock the bulb from the back of the front fog lamp housing.
Page 431 430 MAINTAINING YOUR VEHICLE 2. Grasp the tail lamp and pull firmly to disengage the 3. Disconnect the electrical connector from the bulb. lamp from the aperture panel. 4. Twist and remove socket from the lamp. NOTE: It is not necessary to completely remove the tail lamp unit.
Page 432: License Lamps
MAINTAINING YOUR VEHICLE 431 5. Remove the bulb from the socket and replace. License Lamps 1. Using a trim stick or equivalent, gently pry on the side of the license plate lamp to release it from the liftgate.
Page 433: Center High-Mounted Stoplamp
432 MAINTAINING YOUR VEHICLE 2. Rotate the socket 1/4 turn counterclockwise and re- move from the lamp. Center High-Mounted Stoplamp The lamp is an LED assembly. See your authorized dealer for replacement. 3. Pull the bulb from the socket.
Page 434: Fluid Capacities
MAINTAINING YOUR VEHICLE 433 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOPAR Engine Coolant/Antifreeze 5 7.2 Quarts 6.8 Liters Year/100,000 Mile Formula or equivalent)
Page 435: Fluids, Lubricants, And Genuine Parts
434 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 436: Chassis
MAINTAINING YOUR VEHICLE 435 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (CVT) – If MOPAR CVTF + 4 Equipped Manual Transmission – If Equipped MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Brake Master Cylinder MOPAR DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
Page 438 MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..438 Required Maintenance Intervals ..440 Maintenance Schedule ....438...
Page 439 438 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in bold type The oil change indicator system will remind you that it is must be done at the times or mileages specified to ensure time to take your vehicle in for scheduled maintenance. the continued proper functioning of the emissions control On Electronic Vehicle Information Center (EVIC) system.
Page 440 MAINTENANCE SCHEDULES 439 NOTE: “Understanding Your Instrument Panel” or under “In- • The oil change indicator message will not monitor the strument Cluster Description/Odometer/Trip Odom- time since the last oil change. Change your vehicle’s eter” in “Understanding Your Instrument Panel” for oil if it has been six months since your last oil change further information.
Page 441 440 MAINTENANCE SCHEDULES • Inspect the battery and clean and tighten the terminals CAUTION! as required. Failure to perform the required maintenance items • Check the fluid levels of coolant reservoir, brake may result in damage to the vehicle. master cylinder, power steering and transmission and add as needed.
Page 442 MAINTENANCE SCHEDULES 441 6,000 Miles (10,000 km) or 12,000 Miles (20,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 443: Service Schedule
442 MAINTENANCE SCHEDULES 18,000 Miles (30,000 km) or 24,000 Miles (40,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 444 MAINTENANCE SCHEDULES 443 30,000 Miles (50,000 km) or 36,000 Miles (60,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 445 444 MAINTENANCE SCHEDULES 42,000 Miles (70,000 km) or 48,000 Miles (80,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 446 MAINTENANCE SCHEDULES 445 54,000 Miles (90,000 km) or 60,000 Miles (100,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 447 446 MAINTENANCE SCHEDULES 66,000 Miles (110,000 km) or 72,000 Miles (120,000 km) or 72 Months Maintenance Service 66 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 448 MAINTENANCE SCHEDULES 447 78,000 Miles (130,000 km) or 84,000 Miles (140,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 449 448 MAINTENANCE SCHEDULES 90,000 Miles (150,000 km) or 96,000 Miles (160,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 450 MAINTENANCE SCHEDULES 449 102,000 Miles (170,000 km) or 108,000 Miles (180,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 451 450 MAINTENANCE SCHEDULES 114,000 Miles (190,000 km) or 120,000 Miles (200,000 km) or 120 Months Maintenance Service 114 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 452 MAINTENANCE SCHEDULES 451 126,000 Miles (210,000 km) or 132,000 Miles (220,000 km) or 132 Months Maintenance Service 126 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 453 452 MAINTENANCE SCHEDULES 138,000 Miles (230,000 km) or 144,000 Miles (240,000 km) or 144 Months Maintenance Service 138 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate tires. ❏ Change the engine oil and engine oil ❏...
Page 454 MAINTENANCE SCHEDULES 453 † This maintenance is recommended by the manufacturer 150,000 Miles (250,000 km) or to the owner, but is not required to maintain emissions 150 Months Maintenance warranty. Service Schedule ❏ Change the engine oil and engine oil WARNING! filter.
Page 456: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Customer Assistance For The Hearing Or Vehicle......457 Speech Impaired (TDD/TTY) .
Page 457 456 IF YOU NEED CONSUMER ASSISTANCE Publication Order Forms ....461 Traction Grades ..... 463 Department Of Transportation Uniform Tire Temperature Grades .
Page 458: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 457 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 459: Chrysler Group Llc Customer Center
458 IF YOU NEED CONSUMER ASSISTANCE • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
Page 460: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 459 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 461: Warranty Information
460 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 462: In Canada
IF YOU NEED CONSUMER ASSISTANCE 461 If NHTSA receives similar complaints, it may open an Transport Canada, Motor Vehicle Defect Investigations investigation, and if it finds that a safety defect exists in and Recalls, 2780 Sheffield Road, Ottawa, Ontario K1B a group of vehicles, it may order a recall and remedy 3V9.
Page 463 462 IF YOU NEED CONSUMER ASSISTANCE vehicle, system, and/or components is written in acquaint you with specific Chrysler Group LLC ve- straightforward language with illustrations, diagrams, hicles. Included are starting, operating, emergency and charts. and maintenance procedures as well as specifications, capabilities and safety tips.
Page 464 IF YOU NEED CONSUMER ASSISTANCE 463 in each category is shown on the sidewall of the tires on wet pavement, as measured under controlled conditions your vehicle. on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- All passenger car tires must conform to Federal safety mance.
Page 465 464 IF YOU NEED CONSUMER ASSISTANCE grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A repre- sent higher levels of performance on the laboratory test wheel, than the minimum required by law.
Page 466 INDEX...
Page 467 466 INDEX ABS (Anti-Lock Brake System) ....311 Airbag, Window (Side Curtain) ... 61,64,68 Adding Engine Coolant (Antifreeze) ..409 Alarm Light .
Page 468 INDEX 467 Overheating ......373 Warning Light ......195 Selection Of Lubricant .
Page 469 468 INDEX Cargo Light ......178 Climate Control ......275 Cargo Load Floor .
Page 470 INDEX 469 Inspection ......411 Engine Oil ......399 Points to Remember .
Page 471 470 INDEX Electronic Stability Program (ESP) ... . 318 Oil Selection ......398 Electronic Vehicle Information Center (EVIC) .
Page 472 INDEX 471 Fluid, Brake ......435 Filler Door (Gas Cap) ....193 Fluid Capacities .
Page 473 472 INDEX Odometer ......197 High Beam/Low Beam Select Switch ..148 Tachometer .
Page 474 INDEX 473 Information Center, Vehicle ....206 Key-In Reminder ......14 Inside Rearview Mirror .
Page 475 474 INDEX Brake Warning ......195 Seat Belt Reminder ..... 194 Bulb Replacement .
Page 476 INDEX 475 Maintenance Free Battery ....401 Vanity ....... 98 Maintenance, General .
Page 477 476 INDEX Filter ....... 400 Phone, Cellular ......99 Identification Logo .
Page 478 INDEX 477 Radio, Satellite (Uconnect studios) ... 268 Replacement Tires ..... . . 336 Rear Fog Lights .
Page 479 478 INDEX Seat Belt Reminder ..... . . 55 Security Alarm (Theft Alarm) ....17 Seat Belts .
Page 480 INDEX 479 Snow Tires ......338 Storage, Vehicle ......285 Spare Tire .
Page 481 480 INDEX Tire Markings ......321 Replacement ......336 Tire Safety Information .
Page 482 INDEX 481 Hitches ......360 Tread Wear Indicators ....335 Minimum Requirements .
Page 483 482 INDEX Vehicle Theft Alarm (Security Alarm) ..17 Wheel and Wheel Trim ....420 Voice Recognition System (VR) .
Page 484 Chrysler Group LLC 10PM491-126-AC Printed in U.S.A. 3rd Edition...

This manual is also suitable for:

Caliber 2010

Dodge Caliber Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Understanding Your Instrument Panel

Understanding Your Instrument Panel

Starting and Operating

What to Do in Emergencies

Quick Links

Chapters

Related Manuals for Dodge Caliber

Summary of Contents for Dodge Caliber