Front Assembly; Rear Assembly - Sony SSC-DC593 Service Manual

1-2-2. Front Assembly

1. Remove the upper case. (Refer to Section 1-2-1)
2. Remove the four screws, then remove the front
assembly in the direction indicated by the arrow.
3. Disconnect one flexible flat cable from the connector
(CN201) on the PR-269 board.
4. Disconnect one harness from the connector (CN3) on
the AC/DC power supply.
PR-269 board
Flexible flat cable
Front assembly
(The illustration indicates SSC-DC593.)
5. Attach the front assembly in the reverse order of steps
1 to 4.
1-2
B 2x4 DC power
CN201
CN3
B 2x4
Harness

1-2-3. Rear Assembly

For SSC-DC593/DC593P
1. Remove the upper case. (Refer to Section 1-2-1)
2. Remove one screw (B 2x3) and one screw (B 2x4),
then remove the rear assembly in the direction
indicated by the arrow.
3. Disconnect the three harnesses from the connector
(CN1) on the AC/DC power supply and the connectors
(CN601 and CN602) on the CT-221 board.
CT-221 board
PR-269 board
Projections
B 2x3
AC/DC power supply
B 2x4
CN1
(The illustration indicates SSC-DC593.)
4. Attach the rear assembly in the reverse order of steps 1
to 3.
n
When attaching the rear assembly, align the two
projections of the PR-269 board with the two holes of the
CT-221 board and attach it securely.
Holes
Rear
assembly
CN601
CN602
Harnesses
SSC-DC593/DC593P/DC598P (E)