DCR-TRV140E
2-3. VIDEO LIGHT AND FRONT PANEL ASSEMBLY
Wire
Hole
1 Remove the video light while pushing the hole
under the video light using a wire.
2-4. CABINET (L) ASSEMBLY
2 Two screws
(M2)
4 Screw
(M2)
3 Two screws
2 Jack cover
Video light
1 Open the control
switch block.
3 Two screws
(M2)
5 Cabinet (L) assembly
(M2)
4 Screw
(M2)
7 Front panel assembly
2-5. CASSETTE LID ASSEMBLY
5 Cassette lid assembly
2 Two screws
(M2)
– 12 –
5 Two screws
(M2)
8 FP-418 flexible board
(CN752)
6 Two claws
Note: Remove it while
taking care as
the flexible board
is connected.
1 Open the control
switch block.
3 Claw
4 Claw