Teac CR-H260i Owner's Manual page 35

Checking the programmed order
When programmed playback is stopped, press the ENTER
button repeatedly. The track number and program number
will be shown on the display.
Changing or adding a track/file to
the program
1
When programmed playback is stopped,
press the ENTER button repeatedly until the
program number of the track/file you want
to change appears on the display.
p If you want to add a track/file to the end of the pro-
gram, press the ENTER button repeatedly until "T_
_ _" appears on the display.
CR-H260i_OM_EFS_vA_CS6.indb 35
2
Use the Number buttons to select the track/
file that you want to add and then press the
ENTER button.
p You can also select a track/file using the Skip but-
tons (.//).
The selected track will replace the track at the pro-
gram number set in step 1, or be added to the end of
the program if "T_ _ _" was shown when the track
was selected.
35
12/10/11 12:02